化工进展 ›› 2021, Vol. 40 ›› Issue (5): 2509-2516.DOI: 10.16085/j.issn.1000-6613.2020-1195

• 能源加工与技术 • 上一篇    下一篇

烘焙提升纤维素类生物质热解气化性能的研究进展

赵振伟1(), 陈雷1,2(), 伊晓路1,2, 孙来芝1,2, 谢新苹1,2, 杨双霞1,2, 华栋梁1,2()   

  1. 1.齐鲁工业大学(山东省科学院)能源研究所山东省生物质气化技术重点实验室,山东 济南 250014
    2.山东省生物工程技术创新中心,山东 菏泽 274000
  • 收稿日期:2020-06-28 出版日期:2021-05-06 发布日期:2021-05-24
  • 通讯作者: 陈雷,华栋梁
  • 作者简介:赵振伟(1997—),男,硕士研究生,研究方向为生物质综合利用。E-mail:zzw0608@foxmail.com
  • 基金资助:
    国家重点研发计划(2019YFB1503901);山东省自然科学基金(ZR2019MEE069);山东省高等学校青年创新团队项目(2019KJD002);山东省生物工程技术创新中心重大创新项目(2019JSWGCCXZX002)

Research advances in improvement of cellulosic biomass pyrolysis/gasification process by torrefaction

ZHAO Zhenwei1(), CHEN Lei1,2(), YI Xiaolu1,2, SUN Laizhi1,2, XIE Xinping1,2, YANG Shuangxia1,2, HUA Dongliang1,2()   

  1. 1.Shandong Provincial Key Laboratory of Biomass Gasification Technology, Energy Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, Shandong, China
    2.Shandong Innovation Center of Bioengineering Technology, Heze 274000, Shandong, China
  • Received:2020-06-28 Online:2021-05-06 Published:2021-05-24
  • Contact: CHEN Lei,HUA Dongliang

摘要:

生物质作为唯一含碳的可再生能源受到广泛关注。由于生物质具有含水率高、氧含量高、热值低等特性,在生物质热解气化中存在热转化效率低、焦油含量高、产品气热值低等问题。烘焙预处理对于改善生物质原料特性和提升热解气化性能具有积极的影响。本文阐述了烘焙预处理技术对于纤维素类生物质原料的疏水性、可磨性、元素组成、能量密度以及热解气化中产生的产品气组分、焦油组分、产品气热值等方面的影响。原料经烘焙预处理后疏水性、可磨性增强,热值增加,提升了原料品质。同时,经烘焙预处理的纤维素类生物质原料可明显提高热解气化性能,产品气中可燃气体组分含量、产量以及热值得到提升,焦油含量明显下降,提高了热解气化的产品气燃烧性能和利用品质。下一步应开展烘焙与热解气化耦合工艺及应用模式研究,提高生物质热解气化的整体经济性和产品附加值。

关键词: 纤维素类生物质, 可再生能源, 烘焙, 热解气化, 焦油

Abstract:

Biomass has received widespread attention as the only carbon-based renewable energy. Unfortunately, due to its high moisture, high oxygen content and low calorific value, direct conversion of biomass via pyrolysis or gasification is still encountering a number of issues, such as low conversion efficiency, high tar content and low calorific value of gas product. Pretreatment of biomass material by torrefaction exhibits a positive effect on improving the characteristics of feedstock and promoting the pyrolysis/gasification process. In this paper, the effect of torrefaction on the hydrophobicity, grindability, element composition, and energy density of cellulosic biomass feedstock, as well as the gas compositions, tar components, and calorific value of gas produced from pyrolysis/gasification are comprehensively reviewed. After torrefaction, the quality of the biomass materials is improved with enhanced hydrophobicity and grindability, and higher calorific value. At the same time, the pyrolysis/gasification performance of cellulosic biomass also can be promoted by torrefaction pretreatment, with higher combustible gas content, yield, and calorific value in gas product, as well as lower tar content. All these endow gas product with promising combustion performance and quality. Further researches on the coupling technology and application pattern of torrefaction and pyrolysis/gasification process should be carried out to improve the total economy and product added value for biomass conversion.

Key words: cellulosic biomass, renewable energy, torrefaction, pyrolysis gasification, tar

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn