化工进展

• 材料科学与技术 • 上一篇    下一篇

差示扫描量热法表征氯化镁乙醇醇合物结构

岑为,夏先知,刘月祥,毛炳权   

  1. 中国石油化工股份有限公司北京化工研究院,北京100013
  • 出版日期:2014-07-05 发布日期:2014-07-05

A differential scanning calorimetry investigation of magnesium chloride-ethanol adduct

CEN Wei,XIA Xianzhi,LIU Yuexiang,MAO Bingquan   

  1. Beijing Research Institute of Chemical Industry,SINOPEC,Beijing 100013,China
  • Online:2014-07-05 Published:2014-07-05

摘要: 采用差示扫描量热法(DSC)研究了EtOH/MgCl2的摩尔比在1.5~2.8的氯化镁乙醇醇合物的结构。研究表明,该区间的氯化镁乙醇醇合物存在两种稳定的组分,经推断这两种组分分别是MgCl2?2.8EtOH和MgCl2?1.5EtOH,它们的熔融峰值分别在115℃和155℃附近,该区间的氯化镁醇合物是由这两种稳定的组分组成的混合物。另外,氯化镁醇合物的熔点对水分很敏感,微量的水分会使醇合物的熔点降低。热分析结果显示,在MgCl2?2.8EtOH醇合物中存在微量的水分时会在100℃形成特征峰。对具有微量水分且EtOH/MgCl2的摩尔比在1.55~2.64的氯化镁醇合物进行减压脱醇时,首先减少的是MgCl2?2.8EtOH组分,其次是MgCl2?2.8EtOH与微量水分形成的组分,并且没有水分被脱除掉。

关键词: 氯化镁乙醇醇合物, 载体, 差示扫描量热法, 热力学性质, 混合物

Abstract: Magnesium chloride–ethanol adducts (MgCl2?nEtOH) prepared over a composition range of n=1.5 to 2.8,were studied with differential scanning calorimetry. These adducts comprised of two stable compounds,MgCl2?2.8EtOH and MgCl2?1.5EtOH,showing endothermic peaks at 115℃ and 155℃ respectively. In addition,the melting point of the magnesium chloride–ethanol adduct which was very sensitive to water would decrease if trace moisture was present in the adduct. And the characteristic peak of the adduct containing trace moisture and MgCl2?2.8EtOH was observed at 100℃. Moreover,during the dealcoholation of the adducts containing trace moisture with EtOH/MgCl2 molar ratio from 1.55 to 2.64,pure MgCl2?2.8EtOH was removed firstly and then the compound formed by trace moisture and MgCl2?2.8EtOH was removed. However,water was not removed all the way.

Key words: magnesium chloride-ethanol adduct, catalyst support, differential scanning calorimetry thermal analysis, thermodynamic properties, mixtures

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn