化工进展 ›› 2024, Vol. 43 ›› Issue (8): 4273-4282.DOI: 10.16085/j.issn.1000-6613.2023-1268

• 化工过程与装备 • 上一篇    

基于量子化学计算的正己烷热解反应动力学模拟

殷晨阳1(), 刘永峰1(), 陈睿哲1, 张璐1, 宋金瓯2, 刘海峰2   

  1. 1.北京建筑大学北京市建筑安全监测工程技术研究中心,北京 102627
    2.天津大学先进内燃动力全国重点实验室,天津 300072
  • 收稿日期:2023-07-23 修回日期:2023-10-24 出版日期:2024-08-15 发布日期:2024-09-02
  • 通讯作者: 刘永峰
  • 作者简介:殷晨阳(1999—),男,硕士研究生,研究方向为内燃机。E-mail:1289230877@qq.com
  • 基金资助:
    国家自然科学基金(51976007);先进内燃动力全国重点实验室开放研究项目(K2023-04)

Kinetic simulation of n-hexane pyrolysis reaction based on quantitative calculations

YIN Chenyang1(), LIU Yongfeng1(), CHEN Ruizhe1, ZHANG Lu1, SONG Jin’ou2, LIU Haifeng2   

  1. 1.Beijing Engineering Research Center of Monitoring for Construction Safety, Beijing University of Civil Engineering and Architecture, Beijing 102627, China
    2.State Key Laboratory of Engines, Tianjin University, Tianjin 300072, China
  • Received:2023-07-23 Revised:2023-10-24 Online:2024-08-15 Published:2024-09-02
  • Contact: LIU Yongfeng

摘要:

为研究正己烷(n-C6H14)的常压热解特性,提出了正己烷热解(NHP)模型,该模型使用基于误差传播的直接关系图(DRGEP)简化方法和色散校正密度泛函理论的B2PLYP/def2-tzvp方法,得到了一个包含33种物种和134个基元反应的简化机理。利用该模型计算了n-C6H14在不同温度下主要热解产物乙烯(C2H4)、丙烯(C3H6)和丁炔(C4H6)的相对摩尔分数,并对n-C6H14的热解过程进行了反应路径分析。利用同步辐射真空紫外光电离质谱法(SVUV-PIMS)结合射流搅拌反应器(JSR)在温度为673~1103K、压力为1atm条件下对n-C6H14进行了热解实验,并与NHP模型进行了对比分析。结果表明:n-C6H14热解过程中最主要的产物是C2H4,促使C2H4生成较为重要的两个反应的指前因子分别为6.01×1013s-1和2.18×1013s-1。在673~1023K温度范围内,结合量子化学计算得到的NHP模型对n-C6H14主要热解产物的相对摩尔分数进行了预测,与JetSurF 2.0模型相比,C2H4和C4H6的最大误差分别减小了27.9%和47.9%。反应路径分析表明,C2H4主要来源于己基的一系列β位断裂。

关键词: 正己烷, 热解, 计算化学, 反应动力学, 同步辐射真空紫外光电离质谱法, 射流搅拌反应器

Abstract:

To study the atmospheric pressure pyrolysis properties of n-hexane (n-C6H14), an n-hexane pyrolysis (NHP) model was proposed, which used the error propagation-based direct relation graph (DRGEP) simplification method and the B2PLYP/def2-tzvp method employing dispersion-corrected density-functional theory to obtain a model with 33 components and 134 primitive reactions in a simplified mechanism. The model was utilized to calculate the relative mole fractions of the major pyrolysis products of n-C6H14, ethylene (C2H4), propylene (C3H6) and butyne (C4H6), at different temperatures, and the reaction pathways were analyzed for the pyrolysis process of n-C6H14. The pyrolysis of n-C6H14 was tested using synchrotron radiation vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS) coupled with a jet-stirred reactor (JSR) at temperatures ranging from 673K to 1103K and pressures up to 1atm, and was analyzed in comparison with the NHP model. The results showed that the finger-forward factors for the two reactions, which were more important for promoting the generation of C2H4, were 6.01×1013s-1 and 2.18×1013s-1, respectively. n-C6H14 was mainly analyzed by the NHP model combined with the NHP model obtained from quantum chemical calculations in the temperature range of 673—1023K. The relative molar fractions of the main n-C6H14 pyrolysis products were predicted in terms of their relative molar fractions. Compared with the JetSurF 2.0 model, the maximum errors for C2H4 and C4H6 were reduced by 27.9% and 47.9%, respectively. The reaction path analysis indicated that the most dominant product during the pyrolysis of n-C6H14 was C2H4, which mainly originated from a series of β-breaks of the hexyl group.

Key words: n-hexane, pyrolysis, computational chemistry, reaction kinetics, synchrotron-base vacuum ultraviolet photoionization mass spectrometry (SVUV-PIMS), jet-stirred reactor (JSR)

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn