化工进展 ›› 2024, Vol. 43 ›› Issue (1): 490-500.DOI: 10.16085/j.issn.1000-6613.2023-0253

• 资源与环境化工 • 上一篇    

生物炭替代煤粉/焦炭高炉炼铁碳减排技术研究进展

杨梦茹1(), 彭琴1, 常玉龙1,2, 邱淑兴3, 张溅波3, 江霞1,2()   

  1. 1.四川大学建筑与环境学院,四川 成都 610065
    2.四川大学碳中和未来技术学院,四川 成都 610065
    3.攀钢集团攀枝花钢铁研究院有限公司,四川 攀枝花 617000
  • 收稿日期:2023-02-24 修回日期:2023-06-12 出版日期:2024-01-20 发布日期:2024-02-05
  • 通讯作者: 江霞
  • 作者简介:杨梦茹(1998—),女,硕士研究生,研究方向为生物炭功能材料。E-mail:987099724@qq.com
  • 基金资助:
    四川省科技厅重点研发基金(2023YFS0357);攀钢低碳工艺路线图研究基金(21H0936)

Research progress of carbon emission reduction technology with biochar replacing pulverized coal/coke for blast furnace ironmaking

YANG Mengru1(), PENG Qin1, CHANG Yulong1,2, QIU Shuxing3, ZHANG Jianbo3, JIANG Xia1,2()   

  1. 1.College of Architecture & Environment, Sichuan University, Chengdu 610065, Sichuan, China
    2.College of Carbon Neutrality Future Technology, Sichuan University, Chengdu 610065, Sichuan, China
    3.Panzhihua Iron and Steel Research Institute Company Limited of Pangang Group, Panzhihua 617000, Sichuan, China
  • Received:2023-02-24 Revised:2023-06-12 Online:2024-01-20 Published:2024-02-05
  • Contact: JIANG Xia

摘要:

钢铁行业是能源消耗和碳排放大户,因此在碳中和背景下寻求可替代传统煤的零碳原料是钢铁行业重点发展的碳减排技术。生物炭具有碳中性特征,碳含量和热值与煤接近,是煤粉和焦炭理想的替代原料。本文系统介绍了生物炭在炼焦、烧结、高炉炼铁中的潜在利用途径,并进一步聚焦生物炭应用于高炉炼铁时所需具备的理化特性,阐述了生物炭碱金属、强度、粒度与比表面积在替煤代焦时的影响及机理。针对碱金属降低焦炭强度等问题,介绍了酸洗等脱矿方法降低生物炭碱金属含量;针对生物炭机械强度差难以入炉问题,总结了焦炭强度形成机理和生物炭成型增强工艺;针对生物炭导致炼焦煤混合物流动性变差问题,通过调控生物炭粒度和比表面积以降低对焦炭的负面影响。最后,总结了生物炭替代煤粉和焦炭高炉炼铁的国内外进展及预期CO2减排效果。通过分析生物炭替煤代焦目前工业应用中存在的挑战以及生命周期评价的相关研究情况,为未来钢铁行业实现碳中和提供技术支撑。

关键词: 生物质, 生物炭, 高炉炼铁, 替煤代焦, 二氧化碳, 碳中和, 生命周期评价

Abstract:

The steel industry is a major energy consumer and carbon emitter, so seeking zero-carbon raw materials that can replace traditional coal in the context of carbon neutrality is a key carbon emission reduction technology for the steel industry. Biochar has the characteristics of carbon neutrality, and the carbon content and calorific value are close to that of coal, which is an ideal alternative raw material for pulverized coal and coke. This paper introduced the potential utilization methods of biochar in coking, sintering and blast furnace ironmaking, focused on the physical and chemical characteristics of biochar when applied to blast furnace ironmaking and expounded the effects and mechanisms of biochar alkali metal, strength, particle size and specific surface area in coal substitution. Aiming at the problems of alkali metal reducing coke strength, demineralization methods such as pickling were introduced to reduce the content of biochar alkali metal. Aiming at the problem that biochar had poor mechanical strength and was difficult to enter the furnace, the formation mechanism of coke strength and the enhancement process of biochar molding were summarized. In view of the problem of poor fluidity of coking coal mixture caused by biochar, the negative impact on coke was reduced by adjusting the particle size and specific surface area of biochar. Finally, the domestic and international progress of biochar in replacing pulverized coal and coke for blast furnace ironmaking and the expected CO2 emission reduction effect were summarized. By analyzing the challenges of the current industrial application of biochar instead of coal/coke and the related research on life cycle assessment, it will provide technical support for the future carbon neutrality of the steel industry.

Key words: biomass, biochar, blast furnace ironmaking, substitution for coal and coke, carbon dioxide, carbon neutral, life cycle assessment

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn