化工进展 ›› 2023, Vol. 42 ›› Issue (8): 3956-3964.DOI: 10.16085/j.issn.1000-6613.2023-0150

• 专栏:化学产品工程 • 上一篇    下一篇

3D打印催化材料开发与应用进展

吴海波1,2(), 王希仑2, 方岩雄1, 纪红兵2,3()   

  1. 1.广东工业大学轻工化工学院,广东 广州 510006
    2.中山大学惠州研究院,广东 惠州 516081
    3.浙江工业大学化学工程学院,浙江绿色石化与轻烃转化研究院,浙江 杭州 310014
  • 收稿日期:2023-02-07 修回日期:2023-07-01 出版日期:2023-08-15 发布日期:2023-09-19
  • 通讯作者: 纪红兵
  • 作者简介:吴海波(1985—),男,博士研究生,高级工程师,研究方向为结构化催化剂。E-mail:wu.haibo08@163.com
  • 基金资助:
    国家重点研发计划“纳米科技”重点专项(2020YFA0210900);广东省“珠江人才计划”本土创新科研团队项目(2017BT01C102);先进能源科学与技术广东省实验室团队项目(DJLTF0410);广东省基础与应用基础研究基金(2022A1515140008)

Progress of the development and application of 3D printing catalyst

WU Haibo1,2(), WANG Xilun2, FANG Yanxiong1, JI Hongbing2,3()   

  1. 1.Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006, Guangdong, China
    2.Huizhou Research Institute of Sun Sat-sen University, Huizhou 516081, Guangdong,China
    3.Institute of Green Petroleum Processing and Light Hydrocarbon Conversion, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, Zhejiang, China
  • Received:2023-02-07 Revised:2023-07-01 Online:2023-08-15 Published:2023-09-19
  • Contact: JI Hongbing

摘要:

与传统制备技术相比,3D打印技术在材料制备方面具有低成本、精度高和结构可控等优势,这使得3D打印技术在催化领域受到了广泛的关注。本文介绍了催化材料3D打印技术的最新进展,包括熔融沉积、光固化技术、直接墨水书写和选择性激光烧结技术。并对基于3D打印的聚合物、碳基材料、金属及氧化物基等材料在催化领域的应用进行了综述。文中指出,3D打印技术为催化剂的制备提供了一种新的途径,但在催化剂制备和应用方面仍存在打印速度慢、材料物理化学性质不稳定和使用范围受限等不足。本文提出了在材料种类拓展、催化剂结构优化、新型打印机与表面涂层技术研发等方面的未来发展方向。

关键词: 3D打印, 催化剂, 制备, 催化(作用)

Abstract:

Compared with traditional catalyst preparation techniques, 3D printing has been gathered much attention due to the advantages of low cost, high accuracy and controllable structures. Recent progress of 3D printing technology in catalytic materials was introduced in this paper, including fused deposition modeling, stereo lithography appearance, direct ink writing and selective laser sintering. The catalytic applications of polymer, carbon-based materials, metal and oxide-based materials prepared by 3D printing techniques were reviewed. 3D printing provides a new catalyst preparation way, but there were still shortcomings in the preparation and application, such as slow printing speed, unstable physical and chemical properties of materials, and limited application field. The directions for future development such as expanding material types, optimizing catalyst structures, new printers and surface coating technologies were proposed.

Key words: 3D printing, catalyst, preparation, catalysis

中图分类号: 

版权所有 © 《化工进展》编辑部


本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn