化工进展 ›› 2021, Vol. 40 ›› Issue (4): 1948-1965.DOI: 10.16085/j.issn.1000-6613.2020-1949

• 专栏:工业催化 • 上一篇    下一篇

d区过渡金属基催化剂用于电化学合成氨

赵斐(), 王琪, 刘光(), 李晋平()   

  1. 太原理工大学化学化工学院,气体能源高效清洁利用山西省重点实验室,山西 太原 030024
  • 收稿日期:2020-09-24 出版日期:2021-04-05 发布日期:2021-04-14
  • 通讯作者: 刘光,李晋平
  • 作者简介:赵斐(1995—),女,硕士研究生,研究方向为电催化合成氨。E-mail:751933614@qq.com
  • 基金资助:
    国家自然科学基金(21878204);山西省重点研发计划国际合作项目(201903D421073)

d-Block transition metal-based catalysts for electrocatalytic ammonia synthesis

ZHAO Fei(), WANG Qi, LIU Guang(), LI Jinping()   

  1. Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
  • Received:2020-09-24 Online:2021-04-05 Published:2021-04-14
  • Contact: LIU Guang,LI Jinping

摘要:

d区过渡金属基(d-TMs)材料易于改性,且因其空的d轨道有利于吸附氮气(N2),分离的d电子可以供给N2,被认为是理想的电化学合成氨(NRR)催化剂,在近年的深入研究中取得长足进展。本文综述了近几年改性d-TMs基材料应用于NRR的研究报道,简述了基于d-TMs基催化剂的NRR反应机理,并详细总结了表/界面工程、晶面调控与非晶化、缺陷工程、构建仿生位点等改性策略指导设计的d-TMs基NRR催化剂,重点分析了每种改性策略对NRR性能的影响。最后对该领域的发展前景进行了展望,从理论计算模型、催化剂改性、电化学体系、测试及表征手段、氨气(NH3)检测手段等角度进一步提出了今后需要关注的问题,为改性d-TMs基高效NRR催化剂的设计提供了参考。

关键词: 电化学, 合成, 活性, 催化剂

Abstract:

d-Block transition metals (d-TMs) are considered to be an ideal candidate for electrocatalytic nitrogen reduction reaction (NRR) catalysts because they are easy to be modified. Meanwhile, they possess unfilled valence d orbitals, which are conducive to adsorbing nitrogen (N2), as well as separated d electrons can donate into N2 Consequently, considerable progress of d-TMs in NRR has been acquired in in-depth research. This article reviewed the latest researches on the applications of d-TMs based materials, which were designed and synthesized by different modification strategies to NRR. The NRR mechanisms based on d-TMs catalysts were briefly described. Moreover, the d-TMs based NRR catalysts designed by modification strategies such as surface/interface engineering, crystal facet regulation/amorphization, defect engineering, as well as the construction of bionic site, were summarized in detail and the influence of each modification strategy on NRR performance was analyzed. Finally, this article prospected the development prospects of this field and proposed the problems that need to be paid attention in the future from a series of perspectives, e.g., theoretical calculation model, catalyst modification strategies, electrochemical system, testing and characterization methods, and ammonia (NH3) detection methods, so as to provide references for the design of modified d-TMs based efficient NRR catalysts.

Key words: electrochemistry, synthesis, reactivity, catalyst

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn