化工进展 ›› 2020, Vol. 39 ›› Issue (5): 1707-1713.DOI: 10.16085/j.issn.1000-6613.2019-1439

• 化工过程与装备 • 上一篇    下一篇

沉淀过程对锰孔雀石结构及其演化过程的影响

陈帅帅(), 陈鑫超, 凌晨, 蒋新()   

  1. 浙江大学化学工程与生物工程学院,浙江省化工高效制造技术重点实验室, 浙江 杭州 310027
  • 出版日期:2020-05-05 发布日期:2020-05-25
  • 通讯作者: 蒋新
  • 作者简介:陈帅帅(1996—),男,硕士研究生,研究方向为纳米催化剂。E-mail:21828002@zju.edu.cn
  • 基金资助:
    国家自然科学基金(21676236);国家重点研发计划(2017YFC0211802)

Influence of the precipitation process on the structure and evolution of manganese malachite

Shuaishuai CHEN(), Xinchao CHEN, Chen LING, Xin JIANG()   

  1. Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, Zhejiang, China
  • Online:2020-05-05 Published:2020-05-25
  • Contact: Xin JIANG

摘要:

锰孔雀石中的Mn含量对其后续演变和Cu-Mn催化剂的活性有重要的影响。本文利用搅拌釜反应器和微反应器制备了铜锰的碱式碳酸盐共沉淀物,研究了混合过程对Cu2+、Mn2+的共沉淀反应过程及共沉淀产物的后续演变过程的影响。采用X射线衍射(XRD)、热重质谱联用(TG-MS)、氢气程序升温还原(H2-TPR)分析了前体、催化剂的结构及演变过程。研究发现,在混合较好的微反应器制备的样品中,锰孔雀石中的极限Mn质量分数为25%左右,明显高于文献研究从搅拌釜中得到的数值。通过对扩散-反应过程的分析发现,反应过程中的混合效果越好,制备得到的前体中锰孔雀石的含量越多且其中的锰含量越高。高锰含量的锰孔雀石在焙烧时会形成更多的Cu-Mn界面,进而产生更多的高温碳酸盐,最终的铜锰催化剂中Cu、Mn相互作用更强,催化活性更高。

关键词: 锰孔雀石, 微反应器, 沉淀, 锰含量, 混合

Abstract:

The Mn content in manganese malachite has an important influence on its subsequent evolution and the activity of Cu-Mn catalyst. A series of copper manganese co-precipitate were prepared by using a batch reactor and several different microreactors, and the effect of the mixing on the co-precipitation of Cu2+ and Mn2+ and the evolution of precipitate was investigated. X-ray diffraction (XRD), thermogravimetry-mass spectrometry (TG-MS) and hydrogen temperature programmed reduction (H2-TPR) were used for analyzing the structure of the precursors and catalysts. The results indicated that the limit Mn content in manganese malachite prepared by the microreactors with better mixing was about 25%, which was significantly higher than the value reported in the literature. The analysis of diffusion-reaction process revealed that as the mixing increased during the precipitation process, more manganese malachite with higher Mn content was formed in precursors. During the subsequent calcination, these precursors decomposed into mixed oxides with more Cu-Mn interfaces, leading to the preservation of more high-temperature carbonate. The catalysts prepared in flow pattern with excellent mixing had stronger Cu-Mn interaction and better catalytic performance.

Key words: manganese malachite, microreactor, precipitation, manganese content, mixing

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn