高分子表面金属化技术

doi:10.16085/j.issn.1000-6613.2017-1201

摘要/Abstract

摘要： 高分子表面金属化是对高分子材料表面进行改性处理使其具有良好物理性能、力学性能及金属光泽的表面技术，广泛应用于高分子导电、薄膜修饰、电磁屏蔽等领域。本文综述了高分子表面金属化的两大类技术方法，即干法镀膜和湿法镀膜。介绍了几种典型的表面处理技术，如真空镀膜、喷涂金属转移法、化学镀、化学还原金属化以及电镀，并总结了它们的技术特点以及在科学研究和工业生产应用中的难点。阐明了从传统电镀技术发展而来的高分子表面直接电镀工艺的优势，直接电镀工艺省去了电镀前的活化工序，缩短了工艺时间，避免了电镀前工艺对环境造成的污染，成为高分子表面金属化技术发展的新方向。

关键词: 高分子, 表面, 沉积物, 电化学, 膜

Abstract: Polymer surface metallization modifies the surface of polymer materials to provide them with good physical properties,mechanical properties and metallic luster. As a new surface treatment process,the surface metallization of polymer is widely used in the fields of polymer conduction,film modification,electromagnetic shielding and so on. Two technical methods of surface metallization of polymers,namely dry coating and wet coating,are reviewed in this paper. Several typical surface treatment techniques,such as vacuum coating,metal spray transfer,electroless plating,chemical reduction metallization and electroplating,are introduced. The technical characteristics of these techniques and the difficulties of their application in scientific research and industrial production are summarized. The advantage of direct electroplating on polymer surface which is developed from the traditional electroplating process is elucidated. Direct electroplating technology eliminates the activation procedure before plating,shortens the process time,avoids the pollution caused by the pre- plating process,and thus has become a new direction for the development of polymer surface metallization technology.

Key words: polymer, surface, deposition, electrochemistry, film

中图分类号:

TQ153.3
O646

姚卫国, 鲁姗姗, 窦艳丽, 管东波, 王晓伟. 高分子表面金属化技术[J]. 化工进展, 2018, 37(05): 1852-1859.

YAO Weiguo, LU Shanshan, DOU Yanli, GUAN Dongbo, WANG Xiaowei. Polymer surface metallization technology[J]. Chemical Industry and Engineering Progress, 2018, 37(05): 1852-1859.

参考文献

[1] 王建,唐劲,梁辉,等. 非金属表面金属化[J]. 电镀与精饰,2005,27(3):19-23. WANG Jian,TANG Jin,LIANG Hui,et al. Surface metallization of nonconductors[J]. Plating & Finishing,2005,27(3):19-23.
[2] 应世杰. 塑料金属化技术[J]. 电子工艺技术,1985(10):7-12. YING Shijie. Plastic metallization technology[J]. Electronics Process Technology,1985(10):7-12.
[3] 同春. 真空热处理在能源和电子工业中的应用[J]. 真空与低温,1983(2):63-65. TONG Chun. Application of vacuum heat treatment in energy and electronics industry[J].Vacuum and Cryogenics,1983(2):63-65.
[4] MAX A. Process for the manufacture of a pulverulent alkyl cellulose coated upon a pulverulent carrier:US36279253A[P]. 1953-03-17.
[5] SMITH H M,TURNER A F. Vacuum deposited thin films using a ruby laser[J]. Applied Optics,1965,4(1):147-148.
[6] DIJKKAMP D,VENKATESAN T,WU XD,et al. Pulsed laser etching of high Tc superconducting films[J].Applied Physics Letters,1987,51(8):619-621.
[7] WESTWOOD W D. Sputter deposition processes[J]. MRS Bulletin,1988,13(12):46-51.
[8] WEHNER G K. Sputtering of metal single crystals by ion bombardment[J]. Journal of Applied Physics,1955,26(8):1056-1057.
[9] SAVVIDEES N,WINDOW B. Unbalanced magnetron ion-assisted deposition & property modification[J]. Journal of Vacuum Science & Technology A:Vacuum Surfaces & Films,1986,4(3):504-508.
[10] WINDOW B,SAVVIDES N. Unbalanced dc magnetrons as sources of high ion fluxes[J]. Journal of Vacuum Science & Technology A:Vacuum Surfaces & Films,1986,4(3):453-456.
[11] KOUZNETSOV V,MACAK K,SCHNEIDER J M,et al. A novel pulsed magnetron sputter technique utilizing very high target power densities[J]. Surface & Coatings Technology,1999,122(2/3):290-293.
[12] MATTOX D X. Film deposition using accelerated ions[J]. Electrochemical Technology,1963,2:295.
[13] BUNSHAH R F,RAGHURAM A C. Activated reactive evaporation process for high rate deposition of compounds[J]. Journal of Vacuum Science Technology,1972,9(6):1385-1388.
[14] MORLEY J R,SMITH H R. High rate ion production for vacuum deposition[J]. Journal of Vacuum Science & Technology,1972,9(6):1377-1378.
[15] 樊勇. 真空阴极弧离子镀的发展及应用[J]. 新技术新工艺,2008(4):93-96. FAN Yong. Development and application of vacuum cathode arc ion plating[J]. New Technology & New Process,2008(4):93-96.
[16] 吴利英. 树脂基碳纤维复合材料天线反射面转移法金属化技术[C]//2006年中国工程塑料加工应用技术研讨会. 承德,2006:179-181. WU Liying. Metalizing technology by transfer of CFRP antennas reflector[C]]//China Engineering Plastics Technology Seminar of 2006. Chengde,2006:179-181.
[17] 吴利英,高建军,靳武刚. 复合材料制件表面金属化技术——金属喷涂转移法[J].表面技术,2001,30(6):25-26. WU Liying,GAO Jianjun,JIN Wugang. Composites metalizing technology——spraying transfer process[J]. Surface Technology,2001,30(6):25-26.
[18] NARCUS H. Method for silvering nonconductive materials:US64466146A[P]. 1947-05-27.
[19] PATEL G N,BOLIKAL D,BELLEMARE R A. Pre-swelling and etching of plastics for plating:US4941940[P]. 1990-07-17.
[20] RYU S K,SU K. Plating method of metal film on the surface of polymer:EP1366207[P]. 2009-05-20.
[21] HONMA H,KAWAHARA A,TERANISHI A. Method of plating nonconductor product:US6992000[P]. 2006-01-31.
[22] BERGSTROM E,AXEL. Surface metallizing method:US19353250A[P]. 1955-02-15.
[23] SHIPLEY C R. Method of electroless deposition on a substrate and catalyst solution therefor:US81855459A[P]. 1961-12-05.
[24] GULLA K,CONLAN W A. Catalyst solution for electroless metal deposition on a substrate:US3904792[P]. 1975-09-09.
[25] OKABAYASHI K. Sensitizing activator composition for chemical plating:US4933010[P]. 1990-06-12.
[26] 邝少林,刘伏保,洪春. 化学镀第三代活化工艺的研究——离子型钯活化液[J].材料保护,1986(3):14-17. KUANG Shaolin,LIU Fubao,HONG Chun.The third generation of activating process in electroless plating-lonic palladinm activation solution[J]. Materials Protection,1986(3):14-17.
[27] CHARBONNIER M,ROMAND M. Polymer pretreatments for enhanced adhesion of metals deposited by the electroless process[J]. International Journal of Adhesion & Adhesives,2003,23(4):277-285.
[28] 时刻,黄英,李鹏,等. 非金属材料化学镀的应用新进展[J]. 玻璃钢/复合材料,2005(2):45-48. SHI Ke,HUANG Ying,LI Peng,et al.Current progress in electroless plating of non-metallic materials[J]. Fiber Reinforced Plastics/Composites,2005(2):45-48.
[29] ESROM Hilmar. Fast selective metal deposition on polymers by using IR and excimer VUV photons[J].Applied Surface Science,2001,168(1):1-4.
[30] KORDAS K,LEPPAVUORI S,UUSIMAKI A,et al. Palladium thin film deposition on polyimide by CW Ar + laser radiation for electroless copper plating[J]. Thin Solid Films,2001,384(2):185-188.
[31] KORDAS K,LEPPAVUORI S,UUSIMAKI A,et al. Laser direct writing of copper on polyimide surfaces from solution[J]. Applied Surface Science,2000,154:399-404.
[32] SCHROTT A G. Laser-assisted seeding for electroless plating on polyimide surfaces[J]. Journal of the Electrochemical Society,1995,142(3):944-949.
[33] NⅡNO H,YABE A. Chemical surface modification of fluorocarbon polymers by excimer laser processing[J]. Applied Surface Science,1996,96-98(96):550-557.
[34] TAKATOSHI Y,HITOSHI O,RYUTOKU Y. Metallization of polyacrylonitrile by reduction of polymer-incorporated metal ions[J]. Angewandte Makromolekulare Chemie,1992,197(1):49-58.
[35] SHIBATA M,YOSOMIYA R,YOSOMIYA T. Metallization of poly(vinylidene fluoride) by reduction of polymer-incorporated metal ions[J]. Die Angewandte Makromolekulare Chemie,2015,253:183-191.
[36] YEN C C,HUANG C J,CHANG T C. Studies on the preparation and properties of conductive polymers. Part Ⅱ. Novel method to prepare metallized plastics from metal chelates of polyamides[J]. Journal of Applied Polymer Science,1991,42(2):439-451.
[37] HUANG C J,YEN C C,CHANG T C. Studies on the preparation and properties of conductive polymers. Ⅳ. Novel method to prepare metallized plastics from metal chelates of polymides-imides[J]. Journal of Applied Polymer Science,2003,42(8):2267-2277.
[38] DAVY H. The bakerian lecture:on some chemical agencies of electricity[J]. Philosophical Magazine,1973,97(110):1-56.
[39] 文亚. 电镀的起源[J]. 表面工程资讯,2009,9(3):38-39. WEN Ya. The origin of electroplating[J]. Information of Surface Engineering,2009,9(3):38-39.
[40] SHU C,XIE G-R,ZHU Y-L. Electroplating of nickel-tungsten alloy on ABS plastic[J]. Electroplating & Finishing,2010,29(7):5-8.
[41] 康潆丹,郭丽鸣,谢祯壑. ABS塑料无氰仿金电镀工艺条件研究[J].沈阳师范大学学报(自然科学版),2002,20(4):899-91。KANG Y D,GUO L M,XIE Z H. Study of technological conditions of imitating gold electroplating on ABS plastics[J]. Journal of Shenyang Normal University,2002,20(4):289-291.
[42] OLIVERA S,VENKATESH K,GOPALAKRISHNA K. Plating on acrylonitrile-butadiene-styrene(ABS)plastic:a review[J]. Journal of Materials Science,2016,51(8):3657-3674.
[43] 吴韦杰. 塑胶电镀离子钯活化工艺的开发及应用[D]. 广州:华南理工大学,2012. WU Weijie. The development and application of ionic palladium activation in plating on plastic process[D]. Guangzhou:South China University of Technology,2012.
[44] 沈宇,张健. 一种汽车部件塑料电镀方法:104499019A[P]. 2015-04-08. SHEN Yu,ZHANG Jian. A plastic plating method for automobile parts:104499019A[P]. 2015-04-08.
[45] OABAYASHI K. Method for directly electroplating a dielectric substrate and plated substrate so produced:US5071517[P]. 1991-12-10.
[46] ONO S,NAITOH K,OSAKA T. Initial propagation stage of direct copper plating on non-conducting substrates[J]. Electrochimica Acta,1999,44(21/22):3697-3705.
[47] IKEDA M,MATSUNAMI T,OKA H. Method of electroplating non-conductive materials:US5908543[P]. 1999-06-01.
[48] WANG D,LANDAU U. Direct electroplating on nonconductors[J]. Journal of the Electrochemical Society,1995,142(8):2598-2603.
[49] YANG C H. A search for the mechanism of direct copper plating via bridging ligands[J]. Journal of the Electrochemical Society,1996,143(11):3521-3525.
[50] JOSHI N E,MCCASKIE J E,BOYLE M T. Composition and process for treating a surface coated with a self-accelerating and replenishing non-formaldehyde immersion coating:US5725640[P]. 1998-03-10.
[51] RANDOLPH C M,NELSEN B F. Process for preparing a nonconductive substrate for electroplating:US5139642[P]. 1992-08-10.
[52] 坂本佳宏. 非导电体表面的电镀方法:94100873.8[P]. 1994-09-14. SAKAMOTO Yoshihiro.. Electroplating method of nonconductor surface:94100873.8[P]. 1994-09-14.
[53] CHIANG C K,FINCHER C R J,PARK Y W,et al. Electrical conductivity in doped polyacetylene[J]. Physical Review Letters,1977,39(17):1098-1101.
[54] MACDIARMID A G,SOMASIRI N L D. Polyaniline:characterization as a cathode active material in rechargeable batteries in aqueous electrolytes[J]. Journal of Applied Electrochemistry,1988,18(1):92-95.
[55] GARNIER F,TOURILLON G,BARRAUD J Y,et al. First evidence of crystalline structure in conducting polythiophene[J]. Journal of Materials Science,1985,8:2687-2694.
[56] ASAVAPIRIYANONT S,CHANDLER G K,GUNAWARDENA G A,et al. The electrodeposition of polypyrrole films from aqueous solutions[J]. Journal of Electroanalytical Chemistry,1984,177(1):229-244.
[57] 张鹏,何大容,赵发云. 塑料(ABS)表面直接电镀工艺研究[J]. 材料保护,2001,34(6):30-32. ZHANG Peng,HE Darong,ZHAO Fayun. Direct electroplating of plastics[J]. Materials Protection,2001,34(6):30-32.
[58] WOLF G D,JONAS F,SCHOMACKER R. Applying a conductive layer of a polythiophene,then electrodepositing copper on the walls of holes:US5575898A[P]. 1996-11-19.
[59] 孙向英,刘斌,徐金瑞. 木制品表面的金属化及其电镀铜的研究[J]. 华侨大学学报(自然科学版),1997(3):243-246. SUN Xiangying,LIU Bin,XU Jinrui. Metallization of the surface of wood product and its copper electroplating[J]. Journal of Huaqiao University(Natural Science),1997(3):243-246.
[60] 姚卫国,管东波,孙军,等. 一种花纹复制模具电铸芯模的制作方法:10753421.7[P]. 2014-04-23. YAO Weiguo,GUAN Dongbo,SUN Jun,et al. Method for manufacturing electroforming core mold of pattern copying mold:10753421.7[P]. 2014-04-23.