化工进展 ›› 2019, Vol. 38 ›› Issue (02): 933-939.DOI: 10.16085/j.issn.1000-6613.2018-1560

• 材料科学与技术 • 上一篇    下一篇

SiO2/Zn2SnO4/环氧丙烯酸酯涂层的阻燃性能

郑炳云(),杨磊()   

  1. 莆田学院环境与生物工程学院,福建省新型污染物生态毒理效应与控制重点实验室,福建 莆田351100
  • 收稿日期:2018-07-30 修回日期:2018-10-21 出版日期:2019-02-05 发布日期:2019-02-05
  • 通讯作者: 杨磊
  • 作者简介:<named-content content-type="corresp-name">郑炳云</named-content>(1964—),男,教授,研究方向为纳米材料制备及功能高分子材料研究。E-mail:<email>zbyd123@126.com</email>。|杨磊,博士,副教授,研究方向为工业涂料、水性涂料、功能保护性涂料等的研究。E-mail:<email>yanglei7867245@163.com</email>。
  • 基金资助:
    莆田市科技计划(2015G2012);福建省高校产学合作项目(2015H61010065);福建省自然科学基金(2017J01710);大学生创新创业训练计划(201611498031、201711498005、201611498030)

Flame retardancy of nano-SiO2/Zn2SnO4 epoxy acrylate coating

Bingyun ZHENG(),Lei YANG()   

  1. Fujian Provincial Key Laboratory of Ecology-Toxicological Effects & Control for Emerging Contaminants, College of Environmental and Biological Engineering, Putian University, Putian 351100, Fujian, China
  • Received:2018-07-30 Revised:2018-10-21 Online:2019-02-05 Published:2019-02-05
  • Contact: Lei YANG

摘要:

为了探究复合纳米颗粒对环氧丙烯酸酯(EA)涂层阻燃性能的影响,以十六烷基三甲基溴化铵(CTAB)和正硅酸乙酯(TEOS)为原料合成了介孔二氧化硅纳米颗粒,以ZnCl2和SnCl4·5H2O为原料合成了锡酸锌(Zn2SnO4)纳米颗粒,将它们复合制成了介孔二氧化硅/锡酸锌复合纳米颗粒(SiO2/Zn2SnO4),并用X射线粉末衍射仪(XRD)、透射电镜(TEM)对其表征。将所制的纳米颗粒(介孔SiO2、Zn2SnO4、SiO2/Zn2SnO4)与丙烯酸、丙烯酰胺、EA复合,经UV光固化制备出3种涂层(SiO2/EA、Zn2SnO4/EA、SiO2/Zn2SnO4/EA),通过紫外-可见光谱仪、差示扫描量热仪(DSC)及氧指数测定仪等对涂层的透光率、热稳定性、阻燃性能进行测试。结果表明:SiO2/Zn2SnO4/EA涂层的综合性能较佳,当SiO2/Zn2SnO4质量分数为4.85%时,该涂层的热稳定性及阻燃性能最佳,其极限氧指数、燃烧级别、残炭率(500℃下马弗炉煅烧)和硬度分别为31、V-0、17.32 % 及6H。

关键词: 二氧化硅, 锡酸锌, 纳米材料, 制备, 环氧丙烯酸酯涂层, 阻燃

Abstract:

To explore the effect of composite nanoparticles on the flame retardancy of epoxy acrylate (EA) coating, mesoporous silica nanoparticle was synthesized by using cetyltrimethylammonium bromide (CTAB) and tetraethoxysilane (TEOS) as raw materials, and zinc stannate nanoparticle was synthesized based on ZnCl2 and SnCl4·5H2O as raw materials. Then mesoporous silica/zinc stannate nanoparticle complex was prepared by compounding them, and the above nanoparticles were characterized by X-ray powder diffractometer (XRD) and transmission electron microscope(TEM). Three kinds of composite coatings(SiO2/EA, Zn2SnO4/EA, SiO2/Zn2SnO4/EA) were prepared by UV curing method through mixing the above prepared nanoparticles(mesoporous SiO2, Zn2SnO4, SiO2/Zn2SnO4), acrylic acid, acrylamide with EA, and the transmittance, thermal stability and flame retardancy of the coating were measured by UV-vis spectrometer, differential scanning calorimeter(DSC) and oxygen index tester. The results showed that the comprehensive properties of SiO2/Zn2SnO4/EA coatings were superior. When the mass percent content of SiO2/Zn2SnO4 was 4.85%, the thermal stability and flame retardancy of the coating are the best. The coating’s limiting oxygen index, combustion grade, carbon residue rate (calcined in muffle furnace at 500℃) and hardness were 31,V-0,17.32% and 6H, respectively.

Key words: silica, zinc stannate, nanomaterials, preparation, epoxy acrylate coating, flame retardant

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn