[1] PIETERSEN C M.Analysis of the LPG-disaster in mexico city[J].Journal of Hazardous Materials,1988,20(1):85-107.
[2] COZZANI V,GUBINELLI G,ANTONIONI G,et al.The assessment of risk caused by domino effect in quantitative area risk analysis[J].Journal of Hazardous Materials.2005,127(1/2/3):14-30.
[3] COZZANI V,TUGNOLI A,SALZANO E.Prevention of domino effect:from active and passive strategies to inherently safer design.[J].Journal of Hazardous Materials,2007,139(2):209-219.
[4] COZZANI V,TUGNOLI A,SALZANO E.The development of an inherent safety approach to the prevention of domino accidents[J]. Accident Analysis and Prevention,2009,41(6):1216-1227.
[5] NECCI A,COZZANI V,SPADONI G,et al.Assessment of domino effect:state of the art and research Needs[J].Reliability Engineering and System Safety,2015,143:3-18.
[6] BRODE H L.Blast wave from a spherical charge[J].Physics of Fluids,1959,2(2):217-229.
[7] Centre for Chemical Process Safety.Guidelines for chemical process quantitative risk analysis[M].New York:American Institute of Chemical Engineers,2000.
[8] BAUM M R.Disruptive failure of pressure vessels:preliminary design guidelines for fragment velocity and the extent of the hazard zone[J].Journal of Pressure Vessel Technology,1988,110(2):168-176.
[9] PRUGH R W.Quantitative evaluation of" Bleve" hazards[J].Journal of Fire Protection Engineering,1991,3(1):9-24.
[10] VEN DEN BOSCH C J H,Weterings R.Methods for the calculation of physical effects (Yellow Book)[M].Hague:Committee for the Prevention of Disasters,2005.
[11] BUBBICO R,MAZZAROTTA B.Analysis and comparison of calculation methods for physical explosions of compressed gases[C]//PIERUCCI S.AIDIC Conference Series.Italy:The Italian Association of Chemical Engineering,2013,11:133-138.
[12] HAUPTMANNS U.A procedure for analyzing the flight of missiles from explosions of cylindrical vessels[J].Journal of Loss Prevention in the Process Industries,2001,14(5):395-402.
[13] HOLDEN P L,REEVES A B.Fragment hazards from failures of pressurized liquefied gas vessels[C]//IchemE Symposium Series.The UK:Safety and Reliability Directorate,1985,93:205-220.
[14] GUBINELLI G,COZZANI V.Assessment of missile hazards:Identification of reference fragmentation patterns[J].Journal of Hazardous Materials,2009,163(2):1008-1018.
[15] GUBINELLI G,COZZANI V.Assessment of missile hazards:evaluation of the fragment number and drag factors.[J].Journal of Hazardous Materials,2009,161(1):439-449.
[16] NGUYEN Q B,MÉBARKI A,SAADA R A,et al.Integrated probabilistic framework for domino effect and risk analysis[J].Advances in Engineering Software,2009,40(9):892-901.
[17] SUN D L,JIANG J C,ZHANG M G,et al.Parametric approach of the domino effect for structural fragments[J].Journal of Loss Prevention in the Process Industries,2012,25(1):114-126.
[18] MÉBARKI A,MERCIER F,NGUYEN Q B,et al.Structural fragments and explosions in industrial facilities. Part I:Probabilistic description of the source terms[J].Journal of Loss Prevention in the Process Industries,2009,22(4):408-416.
[19] HOLDEN P L.Assessment of missile hazards:review of incident experience relevant to major hazard plant[M].London:UKAEA Safety and Reliability Directorate,1988.
[20] 杨玉胜,吴宗之.储罐爆炸碎片最可能抛射距离的Monte-Carlo(蒙特卡罗)数值模拟[J].中国安全科学学报,2008,18(3):15-21. YANG Y S,WU Z Z.Monte-Carlo numerical simulation on the most probable flight distance of fragments from explosion of storage tanks[J].China Safety Science Journal,2008,18(3):15-21.
[21] LISI R,CONSOLO G,MASCHIO G,et al.Domino effects due to the projection of fragments:estimation of the impact probability using a Monte Carlo simulation[J].Chem. Eng.Trans.,2014,36:361-366.
[22] 钱新明,徐亚博,刘振翼.球罐BLEVE碎片抛射的Monte-Carlo分析[J].化工学报,2009,60(4):1057-1061. QIAN X M,XU Y B,LIU Z Y.Monte-Carlo analysis of fragments projectile from spherical tank BLEVE[J].CIESC Journal,2009,60(4):1057-1061.
[23] LISI R,CONSOLO G,MASCHIO G,et al.Estimation of the impact probability in domino effects due to the projection of fragments[J].Process Safety and Environmental Protection,2014,93:99-110.
[24] MÉBARKI A,JEREZ S,MATASIC I.Explosions and structural fragments as industrial hazard:domino effect and risks[J].Procedia Engineering,2012,45:159-166.
[25] BAUM M R.Failure of a horizontal pressure vessel containing a high temperature liquid:the velocity of end-cap and rocket missiles[J].Journal of Loss Prevention in the Process Industries,1999,12(2):137-145.
[26] BAUM M R.The velocity of large missiles resulting from axial rupture of gas pressurised cylindrical vessels[J].Journal of Loss Prevention in the Process Industries,2001,14(3):199-203.
[27] GENOVA B,SILVESTRINI M,TRUJILLO F J L.Evaluation of the blast-wave overpressure and fragments initial velocity for a BLEVE event via empirical correlations derived by a simplified model of released energy[J].Journal of Loss Prevention in the Process Industries,2008,21(1):110-117.
[28] MÉBARKI A,NGUYEN Q B,MERCIER F,et al.Reliability analysis of metallic targets under metallic rods impact:towards a simplified probabilistic approach[J].Journal of Loss Prevention in the Process Industries,2008,21(5):518-527.
[29] ZHANG X M,CHEN G H.The analysis of domino effect impact probability triggered by fragments[J].Safety Science,2009,47(7):1026-1032.
[30] PULA R,KHAN F I,VEITCH B,et al.A model for estimating the probability of missile impact:missiles originating from bursting horizontal cylindrical vessels[J].Process Safety Progress,2007,26(2):129-139.
[31] TUGNOLI A,GUBINELLI G,LANDUCCI G,et al.Assessment of fragment projection hazard:probability distributions for the initial direction of fragments[J].Journal of Hazardous Materials,2014,279:418-427.
[32] TUGNOLI A,MILAZZO M F,LANDUCCI G,et al.Assessment of the hazard due to fragment projection:a case study[J].Journal of Loss Prevention in the Process Industries,2013,28(6):36-46.
[33] BAKER W E.Explosion hazards and evaluation[M].Amsterdam:Elsevier Scientific Pub.Co.,1983.
[34] LIU P,DENG X.Experimental investigation of aerodynamic characteristics on slender bodies at high angles of attack[J].Canadian Aeronautics and Space Journal,2003,49(1):31-40.
[35] FRANZINI J B,FINNEMORE E J,DAUGHERTY R L.Fluid mechanics with engineering applications[M].McGraw-Hill Companies,1997.
[36] HAUPTMANNS U.A Monte-Carlo based procedure for treating the flight of missiles from tank explosions[J].Probabilistic Engineering Mechanics,2001,16(4):307-312.
[37] MÉBARKI A,NGUYEN Q B,MERCIER F.Structural fragments and explosions in industrial facilities:Part Ⅱ——Projectile trajectory and probability of impact[J].Journal of Loss Prevention in the Process Industries,2009,22(4):417-425.
[38] 钱新明,徐亚博,刘振翼.球罐BLEVE碎片抛射的危害性研究[J].高压物理学报,2009,23(5):389-394. QIAN X M,XU Y B,LIU Z Y.Research on hazard of fragments from spherical tank BLEVE[J].Chinese Journal of High Pressure Physics,2009,23(5):389-394.
[39] 陈刚,朱霁平,武军,等.爆炸球罐尺寸对抛射碎片击中相邻罐体概率的影响[J].化工学报,2010,61(6):1599-1604. CHEN G,ZHU J P,WU J,et al.Influence of size of bursting spherical tank on impact probability between fragments and adjacent vessels[J].CIESC Journal,2010,61(6):1599-1604.
[40] SUN D L,JIANG J C,ZHANG M G,et al.Influence of the source size on domino effect risk caused by fragments[J].Journal of Loss Prevention in the Process Industries,2015,35:211-223.
[41] GUBINELLI G,ZANELLI S,COZZANI V.A simplified model for the assessment of the impact probability of fragments[J].Journal of Hazardous Materials,2005,116(3):175-187.
[42] BUKHAREV Y I,ZHUKOV V I. Model of the penetration of a metal barrier by a rod projectile with an angle of attack[J].Combustion Explosion and Shock Waves,1995,31(3):362-367.
[43] KHAN F I,ABBASI S A.Models for domino effect analysis in chemical process industries[J].Process Safety Progress,1998,17(2):107-123.
[44] KHAN F I,ABBASI S A. DOMIFFECT(DOMIno eFFECT):user-friendly software for domino effect analysis[J].Environmental Modelling & Software,1998,13(2):163-177.
[45] 潘旭海,徐进,蒋军成,等.爆炸碎片撞击圆柱薄壁储罐的有限元模拟分析[J].南京工业大学学报(自然科学版),2008,30(3):15-20. PAN X H,XU J,JIANG J C,et al.Finite element simulation analysis on explosion debris impacting thin-wall cylindrical tanks[J].Journal of Nanjing University of Technology(Natural Science Edition),2008,30(3):15-20.
[46] MÉBARKI A,NGUYEN Q B,MERCIER F,et al.A probabilistic model for the vulnerability of metal plates under the impact of cylindrical projectiles[J].Journal of Loss Prevention in the Process Industries,2007,20(2):128-134.
[47] 陈刚,朱霁平,武军,等.储罐爆炸抛射碎片对目标容器的破坏概率研究[J].防灾减灾工程学报,2012,32(2):216-222. CHEN G,ZHU J P,WU J,et al.Damage probability model of target storage tank impacted by explosion fragments[J].Journal of Disaster Prevention and Mitigation Engineering,2012,32(2):216-222.
[48] 李思源,文斌,唐毅.含球形凹坑球壳构件剩余强度系数的计算[J].压力容器,2009,26(3):37-42. LI S Y,WEN B,TANG Y.The calculation of remaining strength factor of spherical shell components with spherical pits[J].Pressure Vessel Technology,2009,26(3):37-42.
[49] 李思源,文斌,唐毅,等.含凹坑圆柱壳的剩余强度系数[J].压力容器,2009,26(7):18-28. LI S Y,WEN B,TANG Y.The remaining strength factor of cylindrical shells with pits[J].Pressure Vessel Technology,2009,26(7):18-28.
[50] SALZANO E,BASCO A.Simplified model for the evaluation of the effects of explosions on industrial target[J]. Journal of Loss Prevention in the Process Industries,2015,37:119-123.
[51] SUN D L,JIANG J C,ZHANG M G,et al.Investigation of multiple domino scenarios caused by fragments[J].Journal of Loss Prevention in the Process Industries,2016,40:591-602. |