化工进展 ›› 2024, Vol. 43 ›› Issue (2): 800-807.DOI: 10.16085/j.issn.1000-6613.2023-1385

• 专栏:多相流测试 • 上一篇    下一篇

基于GBDT的气液两相流相分布测量模型

曾思睿(), 孔明()   

  1. 中国计量大学计量测试工程学院,浙江 杭州 310018
  • 收稿日期:2023-08-11 修回日期:2023-09-27 出版日期:2024-02-25 发布日期:2024-03-07
  • 通讯作者: 孔明
  • 作者简介:曾思睿(1999—),女,硕士研究生,研究方向为光学检测。E-mail:915750241@qq.com
  • 基金资助:
    国家自然科学基金(52076200)

Phase distribution measurement model of gas-liquid two-phase flow based on GBDT

ZENG Sirui(), KONG Ming()   

  1. College of Metrology and Measurement Engineering, China Jiliang University, Hangzhou 310018, Zhejiang, China
  • Received:2023-08-11 Revised:2023-09-27 Online:2024-02-25 Published:2024-03-07
  • Contact: KONG Ming

摘要:

双波长透射法是一种高精度的多相流相分布参数检测方法,为了进一步提高相分布测量的精度,本文提出用梯度提升决策树(GBDT)算法建立相分布测量模型。利用光学仿真,模拟气泡在不同相分布下波长为445nm和635nm的光线在气液两相流中的传播过程,采集检测平面的光强分布,分析不同相分布情况下气泡中心位置和气泡半径对光强分布曲线的影响;用GBDT建立测量模型,以光强缺失宽度和缺失偏移为特征参数,建立特征参数与气泡相分布之间的对应数据库,利用数据库对GBDT模型进行训练;用训练好的模型预测气泡的相分布。建立的测量模型对气泡相分布预测的均方误差小于0.0008mm,均方误差减小了33.33%,证明了测量模型更适用于相分布的测量。搭建了实验平台,对竖直上升气泡流相分布参数进行预测,实现了对气泡中心位置运动轨迹的追踪。

关键词: 气液两相流, 气泡, 上升管, 相分布, 梯度提升决策树

Abstract:

The double-wavelength transmission method is a high precision method to detect the phase distribution parameters of multiphase flow. In order to improve the accuracy of phase distribution measurement, the gradient bosting decision tree (GBDT) algorithm was proposed in this paper. Optical simulation was used to simulate the propagation process of bubble light with wavelength of 445nm and 635nm in gas-liquid two-phase flow under different phase distribution. The light intensity distribution of detection plane was collected and the influence of bubble center location and bubble radius on the light intensity distribution curve under different phase distribution was analyzed. The measurement model was developed with GBDT, and the corresponding database between the characteristic parameters and the bubble phase distribution was established with the missing width and missing offset of light intensity as the characteristic parameters. A trained model was used to predict the phase distribution of bubbles. The mean square error of the measurement model was less than 0.0008mm, and the mean square error was reduced by 33.33%, which proved that the measurement model was more suitable for the measurement of the phase distribution. An experimental platform was built to predict the flow phase distribution parameters of vertically rising bubbles, and the movement trajectory of the central position of bubbles was tracked.

Key words: gas-liquid flow, bubble, riser, phase distribution, gradient bosting decision tree (GBDT)

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn