化工进展 ›› 2020, Vol. 39 ›› Issue (6): 2218-2234.DOI: 10.16085/j.issn.1000-6613.2020-0048

• 专栏:化工分离过程 • 上一篇    下一篇

金属有机骨架材料(MOFs)用于气态轻烃的高效分离研究进展

王小青1,2(), 常则宇1,2, 李立博1,2,3(), 杨江峰1,2, 李晋平1,2,3   

  1. 1.太原理工大学化学化工学院,山西 太原 030024
    2.气体能源高效清洁利用山西省重点实验室,山西 太原 030024
    3.太原理工大学煤科学与技术重点实验室,山西 太原 030024
  • 出版日期:2020-06-05 发布日期:2020-06-16
  • 通讯作者: 李立博
  • 作者简介:王小青(1990 —),女,博士研究生,讲师,研究方向为气体选择性吸附分离。E-mail:wangxiaoqing@tyut.edu.cn
  • 基金资助:
    国家自然科学基金青年科学基金(21908153);国家自然科学基金优秀青年科学基金(21922810);国家自然科学基金面上项目(21878205)

Progress in metal-organic frameworks for efficient separation of gaseous light hydrocarbon

Xiaoqing WANG1,2(), Zeyu CHANG1,2, Libo LI1,2,3(), Jiangfeng YANG1,2, Jinping LI1,2,3   

  1. 1.College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
    2.Shanxi Key Laboratory of Gas Energy Efficient and Clean Utilization, Taiyuan 030024, Shanxi, China
    3.Key Laboratory of Coal Science and Technology, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China
  • Online:2020-06-05 Published:2020-06-16
  • Contact: Libo LI

摘要:

气态轻烃(C1~C3)如甲烷、乙烯、丙烯分别作为应用最广的清洁燃料和大宗化工产品,在国民经济中占据重要的地位。然而,在其生产过程中广泛存在着分离与提纯能耗较高的问题。金属有机骨架材料(MOFs)作为第三代新型多孔材料,近年来在轻烃分离领域显示出巨大的应用潜力。本文综述了MOFs用于气态轻烃分离的现状和机理,总结了本文作者课题组针对不同轻烃产物的分离要求,对MOFs进行了精确的孔径调控、配体功能化修饰、构筑吸附位点、调变柔性结构“开口压力”等,实现了多种气态轻烃组分的高效分离。最后,针对低碳烃工业分离过程中存在的关键问题,对MOFs材料的吸附分离机理进行了深入分析,以及MOFs工业化应用所面临的结构稳定性与分离工艺匹配等进行了展望。

关键词: 气态轻烃, 吸附剂, 金属有机骨架, 结构调控, 吸附, 分离

Abstract:

Gaseous light hydrocarbons (C1—C3), such as methane, ethylene and propylene, are widely used as clean fuels and bulk chemical products, which occupy important position in the national economy. However, their separation and purification processes are very energy-consumption. As the third generation of new porous materials, metal-organic frameworks (MOFs) have shown great potential in the field of light hydrocarbon separation in recent years. In this paper, the current situation and mechanisms of MOFs in the adsorptive separation of light hydrocarbons were reviewed. According to the separation requirements of different light hydrocarbon mixtures, the adsorption and separation performance of MOF materials were regulated through precise pore size control, ligand functional modification, adsorption sites construction, and adjustment of the "opening pressure" of flexible MOFs. Finally, based on the key problems in the industrial light hydrocarbon separation process, the separation mechanism of MOFs material was analyzed, and the structural stability and separation process matching of MOFs were prospected.

Key words: gaseous light hydrocarbons, adsorbents, metal-organic frameworks, structural modification, adsorption, separation

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn