不锈钢金属双极板TiW和TiTa膜的制备及性能

doi:10.16085/j.issn.1000-6613.2019-0279

摘要/Abstract

摘要：

针对质子交换膜燃料电池金属双极板耐蚀性和导电性有待提高的问题，本文用磁控溅射双靶共溅的方法，在316L不锈钢基体表面沉积TiW和TiTa两种非贵金属膜层。通过X射线衍射、扫描电子显微镜-能谱仪、X射线光电子能谱仪、电化学和接触电阻测试等方法，表征了涂覆膜层后不锈钢的微观结构、表面形貌、化学组成、耐腐蚀性和导电性。实验结果表明，磁控溅射制备得到的TiTa膜表面较为均匀，且TiTa膜沉积的不锈钢具有较好的耐腐蚀性，其恒电位极化电流密度能够维持在0.3μA/cm²；从导电性来看，TiW膜与碳纸之间的接触电阻小于TiTa膜。综合考虑材料的各项性能，认为沉积TiTa膜的316L不锈钢有用作金属双极板材料的潜力。

关键词: 燃料电池, 腐蚀, 膜

Abstract:

The TiW and TiTa films were deposited on 316L stainless steel (316L SS) by magnetron co-sputtering method in order to improve the performance of the metallic bipolar plate of proton exchange membrane fuel cell (PEMFC). X-ray diffraction (XRD), scanning electron microscopy (SEM), energy disperse spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), electrochemical methods and interfacial contact resistance (ICR) measurements were used to characterize the 316L SS with TiW and TiTa films. The results show that the deposited TiTa film was relatively uniform. Compared with TiW, TiTa film gave better corrosion resistance. In the potentiostatic polarization test, the corrosion reaction current density of TiTa film maintained about 0.3μA/cm². As for conductivity, the ICR between TiW film and carbon paper was lower than that with TiTa film. Overall, the 316L SS with TiTa film is a kind of promising bipolar plate material for PEMFC.

Key words: fuel cells, corrosion, film

中图分类号:

石锟, 王树博, 李微微, 谢晓峰, 陈靖. 不锈钢金属双极板TiW和TiTa膜的制备及性能[J]. 化工进展, 2020, 39(10): 4081-4087.

Kun SHI, Shubo WANG, Weiwei LI, Xiaofeng XIE, Jing CHEN. Preparation and properties of metallic bipolar plate with TiW and TiTa films[J]. Chemical Industry and Engineering Progress, 2020, 39(10): 4081-4087.

参考文献

1	ARSHAD A, ALI H M, HABIB A, et al. Energy and exergy analysis of fuel cells: a review[J]. Thermal Science and Engineering Progress, 2019, 9: 308-321.
2	MORENO N G, MOLINA M C, GERVASIO D, et al. Approaches to polymer electrolyte membrane fuel cells (PEMFCs) and their cost[J]. Renewable and Sustainable Energy Reviews, 2015, 52: 897-906.
3	南皓雄, 党岱, 田新龙. 低铂燃料电池氧还原催化剂的制备技术研究进展[J]. 化工进展, 2018, 37(11): 4294-4302.
3	NAN H X, DANG D, TIAN X L. Recent progress in the preparation of oxygen reduction catalysts for low-platinum fuel cell[J]. Chemical Industry and Engineering Progress, 2018, 37(11): 4294-4302.
4	WANG Y, CHEN K S, MISHLER J, et al. A review of polymer electrolyte membrane fuel cells: technology, applications, and needs on fundamental research[J]. Applied Energy, 2011, 88(4): 981-1007.
5	TAHERIAN R. A review of composite and metallic bipolar plates in proton exchange membrane fuel cell: materials, fabrication, and material selection[J]. Journal of Power Sources, 2014, 265: 370-390.
6	SHANIAN A, SAVADOGO O. TOPSIS multiple-criteria decision support analysis for material selection of metallic bipolar plates for polymer electrolyte fuel cell[J]. Journal of Power Sources, 2006, 159(2): 1095-1104.
7	WANG Z, WANG Y, LI Z, et al. Investigation of C/Al-Cr-N multilayer coatings for stainless steel bipolar plate in polymer electrolyte membrane fuel cells[J]. Surface and Coatings Technology, 2014, 258: 1068-1074.
8	ZHANG Z, TANG J, WANG Y, et al. Electrodeposition of a novel Pd-Ni-W ternary alloy film on SS316L[J]. International Journal of Electrochemical Science, 2017, 12(7): 6180-6189.
9	BI F, PENG L, YI P, et al. Multilayered Zr-C/a-C film on stainless steel 316L as bipolar plates for proton exchange membrane fuel cells[J]. Journal of Power Sources, 2016, 314: 58-65.
10	WANG Y, NORTHWOOD D O. An investigation into TiN-coated 316L stainless steel as a bipolar plate material for PEM fuel cells[J]. Journal of Power Sources, 2007, 165(1): 293-298.
11	CHA B C, YOU Y Z, HONG S T, et al. Nitride films as protective layers for metallic bipolar plates of polymer electrolyte membrane fuel cell stacks[J]. International Journal of Hydrogen Energy, 2011, 36(7): 4565-4572.
12	LI Z, FENG K, WANG Z, et al. Investigation of single-layer and multilayer coatings for aluminum bipolar plate in polymer electrolyte membrane fuel cell[J]. International Journal of Hydrogen Energy, 2014, 39(16): 8421-8430.
13	FENG K, SHEN Y, LIU D, et al. Ni-Cr co-implanted 316L stainless steel as bipolar plate in polymer electrolyte membrane fuel cells[J]. International Journal of Hydrogen Energy, 2010, 35(2): 690-700.
14	CHOE C, CHOI H, HONG W, et al. Tantalum nitride coated AISI 316L as bipolar plate for polymer electrolyte membrane fuel cell[J]. International Journal of Hydrogen Energy, 2012, 37(1): 405-411.
15	AUKLAND N, BOUDINA A, EDDY D S, et al. Alloys that form conductive and passivating oxides for proton exchange membrane fuel cell bipolar plates[J]. Journal of Materials Research, 2004, 19(6): 1723-1729.
16	L?DRE S, KONGSTEIN O E, OEDEGAARD A, et al. Materials for proton exchange membrane water electrolyzer bipolar plates[J]. International Journal of Hydrogen Energy, 2017, 42(5): 2713-2723.
17	WANG H, SWEIKART M A, TURNER J A. Stainless steel as bipolar plate material for polymer electrolyte membrane fuel cells[J]. Journal of Power Sources, 2003, 115(2): 243-251.
18	XU J, HUANG H J, LI Z Y, et al. Corrosion behavior of a ZrCN coated Ti alloy with potential application as a bipolar plate for proton exchange membrane fuel cell[J]. Journal of Alloys and Compounds, 2016, 663: 718-730.
19	左景伊, 金志强, 孙汝宏, 等. 在蚀孔、缝隙或应力腐蚀裂缝中的闭塞电池腐蚀的加速效应和临界pH值[J]. 北京化工学院学报, 1987, 14(3): 40-46.
19	ZUO J Y, JIN Z Q, SUN R H, et al. Accelerating effect and critical pH value of occluded cell corrosion within pits crevices or S.C. Cracks[J]. Journal of Beijing Institute of Chemical Technology, 1987, 14(3): 40-46.
20	National Institute of Standards and Technology. NIST X-ray photoelectron spectroscopy database, NIST standard reference database number 20[OL]. [2019-05-15]. .
21	FLEISCH T H, MAINS G J. An XPS study of the UV reduction and photochromism of MoO₃ and WO₃[J]. The Journal of Chemical Physics, 1982, 76(2): 780-786.
22	ROGERS J D, SUNDARAM V S, KLEIMAN G G, et al. High resolution study of the M₄₅N₆₇N₆₇ and M₄₅N₄₅N₆₇ Auger transitions in the 5d series[J]. Journal of Physics F: Metal Physics, 1982, 12(9): 2097-2102.
23	NEFEDOV V I, FIRSOV M N, SHAPLYGIN I S. Electronic structures of MRhO₂, MRh₂O₄, RhMO₄ and Rh₂MO₆ on the basis of X-ray spectroscopy and ESCA data[J]. Journal of Electron Spectroscopy and Related Phenomena, 1982, 26(1): 65-78.
24	PEIGNON M C, CARDINAUD C, TURBAN G. A kinetic study of reactive ion etching of tungsten in SF₆/O₂ RF plasmas[J]. Journal of The Electrochemical Society, 1993, 140(2): 505-512.
25	BHATTARAI J, AKIYAMA E, HABAZAKI H, et al. Electrochemical and XPS studies of the corrosion behavior of sputter-deposited W-Nb alloys in concentrated hydrochloric acid solutions[J]. Corrosion Science, 1998, 40(1): 19-42.
26	MURATA M, WAKINO K, IKEDA S. X-ray photoelectron spectroscopic study of perovskite titanates and related compounds: an example of the effect of polarization on chemical shifts[J]. Journal of Electron Spectroscopy and Related Phenomena, 1975, 6(5): 459-464.
27	SAIED S O, SULLIVAN J L, CHOUDHURY T, et al. A comparison of ion and fast atom beam reduction in TiO₂[J]. Vacuum, 1988, 38(8): 917-922.
28	HO S F, CONTARINI S, RABALAIS J W. Ion-beam-induced chemical changes in the oxyanions (MOyn-) and oxides (MO_x) where M=Cr, Mo, W, V, Nb, and Ta[J]. The Journal of Physical Chemistry, 1987, 91(18): 4779-4788.
29	LECUYER S, QUEMERAIS A, JEZEQUEL G. Composition of natural oxide films on polycrystalline tantalum using XPS electron take-off angle experiments[J]. Surface and Interface Analysis, 1992, 18(4): 257-261.
30	RIFFE D M, WERTHEIM G K. Ta(110) surface and subsurface core-level shifts and 4f_7/2 line shapes[J]. Physical Review B, 1993, 47(11): 6672-6679.
31	ONG J L, LUCAS L C, RAIKAR G N, et al. Electrochemical corrosion analyses and characterization of surface-modified titanium[J]. Applied Surface Science, 1993, 72(1): 7-13.
32	BLASCO T, CAMBLOR M A, CORMA A, et al. The state of Ti in titanoaluminosilicates isomorphous with zeolite β[J]. Journal of The American Chemical Society, 1993, 115(25): 11806-11813.
33	SHI K, LI X, ZHAO Y, et al. Corrosion behavior and conductivity of TiNb and TiNbN coated steel for metallic bipolar plates[J]. Applied Sciences, 2019, 9, 2568.
34	YUAN L, WANG H M. Corrosion behaviors of a γ-toughened Cr₁₃Ni₅Si₂/Cr₃Ni₅Si₂ multi-phase ternary metal silicide alloy in NaCl solution[J]. Electrochimica Acta, 2008, 54(2): 421-429.
35	YANG F, ZHANG X, YANG H, et al. Corrosion behavior of electrodeposited Ni with normal and bimodal grain size distribution[J]. Transactions of Nonferrous Metals Society of China, 2019, 29(2): 424-436.
36	WU Z, ZHOU Y, LIN G, et al. An improved model for predicting electrical contact resistance between bipolar plate and gas diffusion layer in proton exchange membrane fuel cells[J]. Journal of Power Sources, 2008, 182(1): 265-269.
37	LAI X, LIU D, PENG L, et al. A mechanical-electrical finite element method model for predicting contact resistance between bipolar plate and gas diffusion layer in PEM fuel cells[J]. Journal of Power Sources, 2008, 182(1): 153-159.
38	KIM K M, KIM K Y. A new alloy design concept for austenitic stainless steel with tungsten modification for bipolar plate application in PEMFC[J]. Journal of Power Sources, 2007, 173(2): 917-924.
39	ARSHI N, LU J, LEE C G, et al. Effect of substrate temperature on the properties of electron beam deposited tantalum films[J]. Thin Solid Films, 2013, 546: 22-25.

[1]	陈匡胤, 李蕊兰, 童杨, 沈建华. 质子交换膜燃料电池气体扩散层结构与设计研究进展[J]. 化工进展, 2023, 42(S1): 246-259.
[2]	张祚群, 高扬, 白超杰, 薛立新. 二次界面聚合同步反扩散原位生长ZIF-8纳米粒子制备聚酰胺混合基质反渗透（RO）膜[J]. 化工进展, 2023, 42(S1): 364-373.
[3]	赵巍, 赵德银, 李世瀚, 刘洪达, 孙进, 郭艳秋. 三嗪型天然气管道缓蚀型减阻剂合成与应用[J]. 化工进展, 2023, 42(S1): 391-399.
[4]	许家珩, 李永胜, 罗春欢, 苏庆泉. 甲醇水蒸气重整工艺的优化[J]. 化工进展, 2023, 42(S1): 41-46.
[5]	张启, 赵红, 荣峻峰. 质子交换膜燃料电池中氧还原反应抗毒性电催化剂研究进展[J]. 化工进展, 2023, 42(9): 4677-4691.
[6]	李雪佳, 李鹏, 李志霞, 晋墩尚, 郭强, 宋旭锋, 宋芃, 彭跃莲. 亲水和疏水改性膜的抗结垢和润湿能力的对比[J]. 化工进展, 2023, 42(8): 4458-4464.
[7]	王报英, 王皝莹, 闫军营, 汪耀明, 徐铜文. 聚合物包覆膜在金属分离回收中的研究进展[J]. 化工进展, 2023, 42(8): 3990-4004.
[8]	王鑫, 王兵兵, 杨威, 徐志明. 金属表面PDA/PTFE超疏水涂层抑垢与耐腐蚀性能[J]. 化工进展, 2023, 42(8): 4315-4321.
[9]	潘宜昌, 周荣飞, 邢卫红. 高效分离同碳数烃的先进微孔膜：现状与挑战[J]. 化工进展, 2023, 42(8): 3926-3942.
[10]	徐杰, 夏隆博, 罗平, 邹栋, 仲兆祥. 面向膜蒸馏过程的全疏膜制备及其应用进展[J]. 化工进展, 2023, 42(8): 3943-3955.
[11]	陆诗建, 刘苗苗, 杨菲, 张俊杰, 陈思铭, 刘玲, 康国俊, 李清方. 改良型CO₂湿壁塔内气液两相流动规律及传质特性[J]. 化工进展, 2023, 42(7): 3457-3467.
[12]	冯江涵, 宋钫. 阴离子交换膜电解池的研究进展[J]. 化工进展, 2023, 42(7): 3501-3509.
[13]	陈香李, 李倩倩, 张甜, 李彪, 李康康. 自愈合油水分离膜的研究进展[J]. 化工进展, 2023, 42(7): 3600-3610.
[14]	刘战剑, 付雨欣, 任丽娜, 张曦光, 袁中涛, 杨楠, 汪怀远. 超疏水涂层在防腐阻垢领域研究进展[J]. 化工进展, 2023, 42(6): 2999-3011.
[15]	蒋博龙, 崔艳艳, 史顺杰, 常嘉城, 姜楠, 谭伟强. 过渡金属Co₃O₄/ZnO-ZIF氧还原催化剂Co/Zn-ZIF模板法制备及其产电性能[J]. 化工进展, 2023, 42(6): 3066-3076.