化工进展 ›› 2018, Vol. 37 ›› Issue (01): 119-127.DOI: 10.16085/j.issn.1000-6613.2017-0649

• 工业催化 • 上一篇    下一篇

煅烧温度对Mo-Mn/TiO2催化剂脱硝脱汞活性的影响

胡鹏, 段钰锋, 陈亚南, 丁卫科, 李春峰, 李娜, 柳帅, 刘猛, 王双群   

  1. 东南大学能源与环境学院, 能源热转换及其过程测控教育部重点实验室, 江苏 南京 210096
  • 收稿日期:2017-04-13 修回日期:2017-07-23 出版日期:2018-01-05 发布日期:2018-01-05
  • 通讯作者: 段钰锋,博士,教授,博士生导师。
  • 作者简介:胡鹏(1993-),男,硕士研究生。E-mail:1595746218@qq.com。
  • 基金资助:
    国家重点研发计划(2016YFB0600604)及国家自然科学基金(51576044)项目。

Influence of calcination temperature on the activity of Mo-Mn/TiO2catalyst for NOx and Hg0 removal

HU Peng, DUAN Yufeng, CHEN Ya'nan, DING Weike, LI Chunfeng, LI Na, LIU Shuai, LIU Meng, WANG Shuangqun   

  1. Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, School of Energy and Environment, Southeast University, Nanjing 210096, Jiangsu, China
  • Received:2017-04-13 Revised:2017-07-23 Online:2018-01-05 Published:2018-01-05

摘要: 研究了浸渍法制备Mo-Mn/TiO2(MMT)催化剂过程中煅烧温度(300℃、450℃、600℃、750℃)对Mo-Mn/TiO2(MMT)催化剂协同脱硝脱汞活性的影响。结果表明,较低的煅烧温度更有利于MMT催化剂的协同脱硝脱汞性能,同时可有效降低SO2对催化剂活性的抑制作用,最佳煅烧温度为300℃。利用BET、XRD、H2-TPR、FTIR和XPS等表征手段对催化剂的理化性质进行了表征,结果表明较低的煅烧温度有利于提高催化剂中活性成分所占的比例,增加金属氧化物在TiO2载体表面的分散度,提高催化剂的低温还原性能。随着煅烧温度的升高,催化剂的比表面积和孔容均逐渐减小,平均孔径先增大后减小,且在高温下发生烧结;MnO2逐渐向Mn2O3转变,锐钛矿型TiO2逐渐向金红石型转变,同时MoO3由非晶态逐渐向晶态的转化,致使催化剂的协同脱硝脱汞活性下降。

关键词: 煅烧温度, 选择性催化还原, Mo-Mn/TiO2, 固定床, 催化剂

Abstract: The influence of calcination temperature (300℃、450℃、600℃、750℃)on the activity of Mo-Mn/TiO2 (MMT) catalysts prepared by an impregnation method for NOx and Hg0 removal was studied. The results showed that, relatively low calcination temperature was beneficial to improve the catalytic activity of MMT catalysts, and reduce the inhibitory effect of SO2 effectively, and the best calcination temperature was 300℃. Physicochemical characteristics of MMT catalysts were investigated by using different analysis techniques of BET, XRD, H2-TPR, FTIR and XPS. The studies showed that relatively low calcination temperature could give high the proportion of active components and high dispersion of metallic oxide on the surface of TiO2 as well as increase the low temperature reduction property of catalysts. With the increase of calcination temperature, the specific surface area and total pore volume gradually decreased. The average pore diameter first increased and then decreased, because of the agglomeration of MMT occurred at high calcination temperature. At the same time, the gradually conversion of MnO2 to Mn2O3, and the transformations of the crystalline phase of TiO2 from anatase to rutile and MoO3 from amorphous to crystalline, synergistically led to the decrease of catalytic activity on the removal of NOx and Hg0.

Key words: calcination temperature, selective catalytic reduction (SCR), Mo-Mn/TiO2, fixed-bed, catalyst

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn