化工进展 ›› 2015, Vol. 34 ›› Issue (11): 4065-4070.DOI: 10.16085/j.issn.1000-6613.2015.11.039

• 资源与环境化工 • 上一篇    下一篇

磁加载絮凝处理含铜废水

罗曼1, 蔡旺锋1, 陈益清2, 张旭斌1   

  1. 1 天津大学化工学院, 天津 300072;
    2 深圳职业技术学院建筑与环境工程学院, 广东 深圳 518055
  • 收稿日期:2015-04-17 修回日期:2015-05-03 出版日期:2015-11-05 发布日期:2015-11-05
  • 通讯作者: 张旭斌,副教授,主要从事工业废水、废气处理方面的研究。E-mailtjzxb@tju.edu.cn。
  • 作者简介:罗曼(1989—),女,硕士研究生,主要从事重金属工业废水处理方面的研究。
  • 基金资助:
    深圳市战略性新兴产业发展专项资金(ZDSY 20120619093952884)及深圳市南山区重点企业和创新机构扶持分项资金(KC2013ZDZJ0005A)项目。

Study on treatment of copper waste water by magnetic seeding flocculation

LUO Man1, CAI Wangfeng1, CHEN Yiqing2, ZHANG Xubin1   

  1. 1 School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
    2 School of Construction and Environmental Engineering, Shenzhen Polytechnic, Shenzhen 518055, Guangdong, China
  • Received:2015-04-17 Revised:2015-05-03 Online:2015-11-05 Published:2015-11-05

摘要: 目前磁加载絮凝技术已被研究用于处理多种类型的废水,然而关于此技术中磁粉作用机理方向少有报道。为了解决这一问题,本文采用磁加载絮凝法处理模拟微蚀铜废水,研究了磁粉的加入对Cu2+和浊度去除率、絮体沉降速率以及絮体粒径的影响,深入分析了磁粉的作用规律和机理,为磁加载絮凝法应用到实际工程中提供了理论依据和技术参数。结果表明,当磁粉投加量和粒径分别取2.0g/L和300~400目时,磁加载絮凝效果最好。此时,Cu2+和浊度去除率均达到最高值98.53%和94.72%,比传统絮凝法高出4.11%和0.61%;絮体沉降速率最快,达5cm/min,是传统絮凝沉降速率的3.64倍;絮体粒径D50也达到最大值41.94μm,较传统絮体粒径大20μm。磁粉投加量过多或过少、粒径过大或过小都会相应地减慢磁絮体的生长速率。

关键词: 磁加载絮凝, 含铜废水, 粒度分布, 沉降, 分离

Abstract: Magnetic seeding flocculation(hereinafter referred to as MSF) has been studied and applied to various types of waste water treatment, but very few studies have been reported regarding magnetic seed mechanism. In order to solve this problem, MSF method was conducted in this study to simulate micro-etching copper waste water. This study compared the influences of dosing magnetic seed on removal rates of copper and turbidity, floc sedimentation rate or floc size, and analyzed the mechanism of magnetic seed effectiveness. The results showed that MSF reached its best performance at 2.0g/L and particle sizes between 300 and 400mesh. Under optimal conditions, the highest removal rates for copper and turbidity were 98.53% and 94.72%, 4.11% and 0.61% higher than traditional flocculation respectively; settling speed also reached its maximum of 5cm/min, 2.64times greater than traditional flocculation;and floc size D50 also reached its maximum of 41.94μm, 20micrometers larger than traditional particle size. The above figures indicated that the floc growth rate was affected by magnetic seed dosage and particle size. This study provided theoretical and practical parameters for the application of MSF.

Key words: magnetic seeding flocculation, copper waste water, particle size distribution, sedimentation, separation

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn