化工进展 ›› 2019, Vol. 38 ›› Issue (10): 4666-4673.DOI: 10.16085/j.issn.1000-6613.2019-0059

• 材料科学与技术 • 上一篇    下一篇

改性氧化铈/钨酸镍环氧防腐涂层的制备及性能

张文博1(),汪怀远1,2(),王池嘉1,陈茜茜1,朱艳吉2   

  1. 1. 东北石油大学化学化工学院,黑龙江 大庆 163000
    2. 天津大学化工学院,天津 300072
  • 收稿日期:2019-01-09 出版日期:2019-10-05 发布日期:2019-10-05
  • 通讯作者: 汪怀远
  • 作者简介:张文博(1994—),男,硕士研究生,研究方向为防腐耐磨涂层。E-mail:995173753@qq.com
  • 基金资助:
    国家自然科学基金(21676052);万人计划青年拔尖人才(2013042)

Preparation and anti-corrosion properties of modified CeO2/NiWO4 epoxy anticorrosive coatings

Wenbo ZHANG1(),Huaiyuan WANG1,2(),Chijia WANG1,Xixi CHEN1,Yanji ZHU2   

  1. 1. College of Chemistry and Chemical Engineering, Northeast Petroleum University, Daqing 163000, Heilongjiang, China
    2. School of Chemical Engineering and Technology and State Key Laboratory for Chemical Engineering, Tianjin University, Tianjin 300350, China
  • Received:2019-01-09 Online:2019-10-05 Published:2019-10-05
  • Contact: Huaiyuan WANG

摘要:

采用水热法制备出不同质量比的氧化铈/钨酸镍(CeO2/NiWO4)的复合粒子,再选用硅烷偶联剂KH560对其进行改性,利用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)和扫描电子显微镜(SEM)表征了复合粒子的结构与形貌。将改性的复合粒子分散于环氧树脂(EP)中,然后喷涂在碳钢基体上制备CeO2/NiWO4/EP复合涂层,利用电化学交流阻抗(EIS)、加速浸泡实验和摩擦磨损试验(Taber)测试涂层的防腐与摩擦性能。结果表明:添加CeO2/NiWO4复合粒子的环氧树脂涂层的防腐耐磨性能大幅度提高,而且当复合粒子中CeO2与NiWO4的质量比为4∶3时,涂层防腐耐磨性能最好,该复合环氧涂层在3.5%NaCl水溶液中浸泡后期(45天)仍保持较高的阻抗模量(7.36×108 Ω/cm2),比纯环氧树脂涂层高一个数量级。同时,经过10000转摩擦磨损后,此复合涂层的质量损失较纯环氧涂层减少56%,厚度损失量仅为CeO2/EP的50%,表现出最优异的防腐耐磨性能。

关键词: 水热, 复合材料, 氧化铈, 钨酸镍, 腐蚀, 耐磨

Abstract:

Composite particles of cerium oxdie/nickel tungstate (CeO2/NiWO4) with different mass ratios were prepared by hydrothermal method, and the composite particles were modified by silane coupling agent KH560. The structure,morphology and properties of the composite materials were characterized by SEM, FTIR and XRD. The modified composite particles were dispersed in epoxy resin (EP), and the CeO2/NiWO4/EP composite coating was prepared on the carbon steel substrate by spraying method. The anti-corrosion and wear resistance studies were tested by electrochemical impendence spectroscopy (EIS), accelerated soaking test and friction-wear test. The results showed that the anti-corrosion effect of CeO2/NiWO4 composite coating was improved greatly. The composite coating exhibited the best anti-corrosion and wear-resisting properties when the mass ratio of CeO2/NiWO4 was 4∶3.The composite coating maintained a high impedance modulus (7.36 × 108 Ω/cm2) immersed in 3.5% NaCl anqeous solution in the late immersion period (45 days), which was an order of magnitude higher than that of a pure epoxy coating. Meanwhile, After 10000 cycles’ rubbing, the friction mass loss of this composit coating was reduced by 56% compared with the EP and the thickness loss was only 50% of CeO2/EP, showing the best corrosion resistance and wear resistance.

Key words: hydrothermal, composites, cerium oxide, nickel tungstate, corrosion, wear resistance

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn