锂硫电池正极复合材料研究现状

doi:10.16085/j.issn.1000-6613.2015.05.026

化工进展 ›› 2015, Vol. 34 ›› Issue (05): 1340-1344.DOI: 10.16085/j.issn.1000-6613.2015.05.026

锂硫电池正极复合材料研究现状

杨蓉¹, 邓坤发¹, 刘晓艳¹, 曲冶¹, 雷京¹, 任冰²

1. 西安理工大学理学院, 陕西西安 710048;
2. 西安理工大学材料科学与工程学院, 陕西西安 710048

收稿日期:2014-09-24 修回日期:2014-12-17 出版日期:2015-05-05 发布日期:2015-05-05
通讯作者: 杨蓉(1973—),女,博士,副教授,从事电化学方向研究.E-mailyangrong@xaut.edu.cn.
作者简介:杨蓉(1973—),女,博士,副教授,从事电化学方向研究.E-mailyangrong@xaut.edu.cn.
基金资助:
国家国际科技合作专项(2015DFR50350)、国家自然科学基金(21276208)、陕西省教育厅自然科学专项项目(14JK1531)及西安理工大学校创新项目(2014CX024).

Recent progress of sulfur composites as cathode materials for lithium sulfur batteries

YANG Rong¹, DENG Kunfa¹, LIU Xiaoyan¹, QU Ye¹, LEI Jing¹, REN Bing²

1. School of Science, Xi'an University of Technology, Xi'an 710048, Shaanxi, China;
2. School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, Shaanxi, China

Received:2014-09-24 Revised:2014-12-17 Online:2015-05-05 Published:2015-05-05

摘要/Abstract

摘要： 锂硫电池由于其高理论能量密度(2600W·h/kg)而受到了广泛的关注,是极具应用前景的电池体系.硫基正极材料作为锂硫电池的重要组成部分,是提高电池性能的关键.然而锂硫电池还存在一些问题,如硫的利用率低及正极结构的稳定性差等.本文综述了近几年锂硫电池硫正极复合材料的研究现状,分别从硫/碳复合、硫/导电聚合物复合、硫/氧化物复合3个方面进行介绍,指出了未来锂硫电池正极材料要注意结合硫/导电聚合物及硫/氧化物的优势并注重材料结构的设计,向核壳或类核壳结构方向发展的趋势,同时还要提高载硫量,提高循环稳定性,以获得高性能的锂硫电池.

关键词: 锂硫电池, 硫正极, 复合材料, 电化学, 聚合物

Abstract: As a promising battery system,lithium-sulfur battery with high theoretical energy density (2600W·h/kg) has attracted great attention. As one of the essential ingredients for lithium-sulfur batteries,sulfur cathode material is the key to improve the performance of batteries. However,there are some serious and unavoidable problems for lithium-sulfur battery,such as low utilization efficiency of sulfur in cathode and poor stability of electrode structure. In this review,the recent progress of sulfur composites as cathode materials for lithium-sulfur batteries is introduced. Cathode materials are divided into three kinds of composites,such as sulfur/carbon,sulfur/polymer and sulfur/oxide composite materials,which are discussed respectively. It is pointed out that the coming development of cathode materials for lithium-sulfur batteries should be focused on the combination of advantages of sulfur/polymer and sulfur/oxide composite materials,and the design of material structure,such as core-shell or core-shell-like structure for cathode materials. At the same time,high sulfur loading and high cycle stability will be good for the performance improvement of lithium-sulfur batteries.

Key words: lithium-sulfur battery, sulfur cathode, composites, electrochemistry, polymers

中图分类号:

TM912.9

杨蓉, 邓坤发, 刘晓艳, 曲冶, 雷京, 任冰. 锂硫电池正极复合材料研究现状[J]. 化工进展, 2015, 34(05): 1340-1344.

YANG Rong, DENG Kunfa, LIU Xiaoyan, QU Ye, LEI Jing, REN Bing. Recent progress of sulfur composites as cathode materials for lithium sulfur batteries[J]. Chemical Industry and Engineering Progree, 2015, 34(05): 1340-1344.

参考文献

[1] Scrosati B,Garche J. Lithium batteries:Status,prospects and future[J]. Journal of Power Sources,2010,195(9):2419-2430.

[2] 贺慧,程璇,张颖,等.锂离子电池正极材料的研究进展[J]. 功能材料,2004,35(6):667-671.

[3] 熊仕昭,洪晓斌,谢凯,等. 改善锂硫电池循环性能的研究进展[J]. 化工进展,2011,30(5):991-995.

[4] Mikhaylik Y V,Akridge J R. Polysulfide shuttle study in the Li/S battery system[J]. Journal of the Electrochemical Society,2004,151:1969-1976.

[5] Martin R B,Philipp A,Heino S,et al. Systematical electrochemical study on the parasitic shuttle-effect in lithium-sulfur-cells at different temperatures and different rates[J]. Journal of Power Sources,2014,259:289-299.

[6] 唐致远,高飞,薛建军,等. 锂离子电池聚合物电解质的研究进展[J]. 化工进展,2004,23(12):1308-1311.

[7] Barchasz C,Leprêtre J,Alloin F,et al. New insights into the limiting parameters of the Li/S rechargeable cell[J]. Journal of Power Sources,2012,199:322-330.

[8] Yang Y,Ya X Y,Sen X,et al. High-safety lithium-sulfur battery with prelithiated Si/C anode and ionic liquid electrolyte[J]. Electrochimica Acta,2013,91:58-61.

[9] Canas N A,Hirosea K,Pascuccia B,et al. Investigations of lithium-sulfur batteries using electrochemical impedance spectroscopy[J]. Electrochimica Acta,2013,97:42-51.

[10] 唐致远,邱瑞玲,腾国鹏,等. 锂离子电池正极材料LiFePO₄的研究进展[J]. 化工进展,2008,27(7):995-1000.

[11] Kumaresan K,Mikhaylik Y,White R. A mathematical model for a lithium-sulfur cell[J]. J Electrochem. Soc.,2008,155(8):576-582.

[12] 吴奕环,易炜,时志强,等. 锂硫电池硫-导电炭黑复合正极材料的研究[J]. 电源技术,2012,36(12):1800-1803.

[13] Jayaprakash N,Shen J,Surya S,et al.Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries[J]. Angewandte Chemie,2011,123(26):6026-6030.

[14] Zhang J,Ye H,Yin Y X,et al.Core-shell meso/microporous carbon host for sulfur loading toward applications in lithium-sulfur batteries[J]. Journal of Energy Chemistry,2014,23 (3):308-314.

[15] Guo Z P,Zhang C F,Wu H B,et al. Confining sulfur in doubleshelled hollow carbon spheres for lithium-sulfur batteries[J]. Angewandte Chemie,2012,124(38) :9730-9733.

[16] Zhang S S,Tran D T. A proof-of-concept lithium/sulfur liquid battery with exceptionally high capacity density[J]. Journal of Power Sources,2012,211:169-172.

[17] 周庆样,肖军平,汪卫东,等. 碳纳米管应用研究进展[J]. 化工进展,2006,25(7):750-754.

[18] Geng X Y,Rao M M,Li X P,et al.Highly dispersed sulfur in multi-walled carbon nanotubes for lithium/sulfur battery[J]. Journal of Solid State Electrochemistry,2013,17(4):987-992.

[19] Li Y C,Mi R,Li S M,et al. Sulfure-nitrogen doped multi walled carbon nanotubes composite as a cathode material for lithium sulfur batteries[J]. International Journal of Hydrogen Energy,2014,39(28):16073-16080.

[20] Zhang S M,Zhang Q,Huang J Q,et al. Composite cathodes containing SWCNT@S coaxial nanocables:Facile synthesis,surface modification,and enhanced performance for Li-ion storage[J]. Particle & Particle Systems Characterization,2013,30(2):158-165.

[21] Zheng G,Yang Y,Cha J J,et al. Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries[J]. Nano Letters,2011,11(10):4462-4467.

[22] 赵斌,李念武,吕洪岭,等. 介孔碳纳米纤维-硫作为锂硫电池正极材料[J]. 无机化学学报,2014,30(4):733-740.

[23] Konstantin N,Andre G,Morozov S V,et al. Electric field effect in atomically thin carbon flms[J]. Science,2004,306(5696):666-669.

[24] Bolotin K I,Sikes K J. Ultrahigh electron mobility in suspended graphene[J]. Solid State Commun.,2008,146(9-l0):351-355.

[25] Kim K S,Zhao Y,Jang H,et al. Large-scale pattern growth of graphene films for stretchable transparent electrodes[J]. Nature,2009,457(7230):706-710.

[26] Wang J Z,Lua L,Choucair M,et al. Sulfur-graphene composite for rechargeable lithium batteries[J]. Journal of Power Sources,2011,196(16):7030-7034.

[27] Chen R J,Zhao T,Lu J,et al. Graphene-based three-dimensional hierarchical sandwich type architecture for high-performance Li/S batteries[J]. Nano Letters,2013,13(10):4642-4649.

[28] 郑加飞,郑明波,李念武,等. 石墨烯包覆碳纳米管-硫(CNT-S)复合材料及锂硫电池性能[J]. 无机化学学报,2013,29(7):1355-1360.

[29] Huang J Q,Liu X F,Zhang Q,et al. Entrapment of sulfur in hierarchical porous graphene for lithium-sulfur batteries with high rate performance from -40 to 60℃[J]. Nano Energy,2013,2(2):314-321.

[30] 马丽萍,刘景东. 锂/硫电池用含硫聚磷腈正极材料[J]. 电池,2009,39(4):203-205.

[31] Wang M,Wang W,Wang A,et al. A multi-core-shell structured composite cathode material with a conductive polymer network for Li-S batteries[J]. Chem. Commun.,2013,49(87):10263-10265.

[32] Wang Z B,Zhang S C,Zhang L,et al. Hollow spherical carbonized polypyrrole/sulfur composite cathode materials for lithium/sulfur cells with long cycle life[J]. Journal of Power Sources,2014,248:337-342.

[33] 熊仕昭,王华林,洪晓斌,等. 聚苯胺包覆对锂硫电池电化学性能的影响[J]. 电源技术,2011,35(6):678-680.

[34] 汪信,陆路德. 纳米金属氧化物的制备及应用研究的若干进展[J]. 无机化学学报,2000,16(2):214-217.

[35] Seh Z W,Li W Y,Cha J J,et al. Sulphur-TiO₂ yolk-shell nanoarchitecture with internal void space for long-cycle lithium-sulphur batteries[J]. Nature Communications,2013,4:1331-1336.

[36] Zhang Y,Bakenov Z,Zhao Y,et al. Effect of nanosized Mg_0.6Ni_0.4O prepared by self-propagating high temperature synthesis on sulfur cathode performance in Li/S batteries[J]. Powder Technology,2013,235:248-255.

[37] Zhang Z,Lai Y,Zhang Z,et al. Al₂O₃-coated porous separator for enhanced electro chemical performance of lithium sulfur batteries[J]. Electrochimica Acta,2014,129:55-61

锂硫电池正极复合材料研究现状

Recent progress of sulfur composites as cathode materials for lithium sulfur batteries

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	张明焱, 刘燕, 张雪婷, 刘亚科, 李从举, 张秀玲. 非贵金属双功能催化剂在锌空气电池研究进展[J]. 化工进展, 2023, 42(S1): 276-286.
[2]	胡喜, 王明珊, 李恩智, 黄思鸣, 陈俊臣, 郭秉淑, 于博, 马志远, 李星. 二硫化钨复合材料制备与储钠性能研究进展[J]. 化工进展, 2023, 42(S1): 344-355.
[3]	张杰, 白忠波, 冯宝鑫, 彭肖林, 任伟伟, 张菁丽, 刘二勇. PEG及其复合添加剂对电解铜箔后处理的影响[J]. 化工进展, 2023, 42(S1): 374-381.
[4]	林晓鹏, 肖友华, 管奕琛, 鲁晓东, 宗文杰, 傅深渊. 离子聚合物-金属复合材料（IPMC）柔性电极的研究进展[J]. 化工进展, 2023, 42(9): 4770-4782.
[5]	雷伟, 姜维佳, 王玉高, 和明豪, 申峻. N、S共掺杂煤基碳量子点的电化学氧化法制备及用于Fe³⁺检测[J]. 化工进展, 2023, 42(9): 4799-4807.
[6]	朱传强, 茹晋波, 孙亭亭, 谢兴旺, 李长明, 高士秋. 固体高分子脱硝剂选择性非催化还原NO _x 特性[J]. 化工进展, 2023, 42(9): 4939-4946.
[7]	李伯耿, 罗英武, 刘平伟. 聚合物产品工程研究内容与方法的思考[J]. 化工进展, 2023, 42(8): 3905-3909.
[8]	王报英, 王皝莹, 闫军营, 汪耀明, 徐铜文. 聚合物包覆膜在金属分离回收中的研究进展[J]. 化工进展, 2023, 42(8): 3990-4004.
[9]	王耀刚, 韩子姗, 高嘉辰, 王新宇, 李思琪, 杨全红, 翁哲. 铜基催化剂电还原二氧化碳选择性的调控策略[J]. 化工进展, 2023, 42(8): 4043-4057.
[10]	刘毅, 房强, 钟达忠, 赵强, 李晋平. Ag/Cu耦合催化剂的Cu晶面调控用于电催化二氧化碳还原[J]. 化工进展, 2023, 42(8): 4136-4142.
[11]	张亚娟, 徐惠, 胡贝, 史星伟. 化学镀法制备NiCoP/rGO/NF高效电解水析氢催化剂[J]. 化工进展, 2023, 42(8): 4275-4282.
[12]	王帅晴, 杨思文, 李娜, 孙占英, 安浩然. 元素掺杂生物质炭材料在电化学储能中的研究进展[J]. 化工进展, 2023, 42(8): 4296-4306.
[13]	李海东, 杨远坤, 郭姝姝, 汪本金, 岳婷婷, 傅开彬, 王哲, 何守琴, 姚俊, 谌书. 炭化与焙烧温度对植物基铁碳微电解材料去除As(Ⅲ)性能的影响[J]. 化工进展, 2023, 42(7): 3652-3663.
[14]	于静文, 宋璐娜, 刘砚超, 吕瑞东, 武蒙蒙, 冯宇, 李忠, 米杰. 一种吲哚基超交联聚合物In-HCP对水中碘的吸附作用[J]. 化工进展, 2023, 42(7): 3674-3683.
[15]	单雪影, 张濛, 张家傅, 李玲玉, 宋艳, 李锦春. 阻燃型环氧树脂的燃烧数值模拟[J]. 化工进展, 2023, 42(7): 3413-3419.