相变储能过程传热强化技术研究进展

doi:10.16085/j.issn.1000-6613.2017-0041

化工进展 ›› 2017, Vol. 36 ›› Issue (S1): 291-296.DOI: 10.16085/j.issn.1000-6613.2017-0041

相变储能过程传热强化技术研究进展

陈亮, 刘道平, 杨亮

上海理工大学能源与动力工程学院, 新能源科学与工程研究所, 上海 200093

收稿日期:2017-01-09 修回日期:2017-07-18 出版日期:2017-12-31 发布日期:2017-12-13
通讯作者: 刘道平,教授,研究方向为单压吸收式制冷和相变蓄能材料。
作者简介:陈亮(1994-),男,硕士研究生,研究方向为相变蓄能材料。
基金资助:
上海市重点学科建设项目（13ZZ117）、国家自然科学基金（51606125）及上海理工大学自然科学基金（15HJPYQN08）项目。

Progress of heat transfer enhancement technology in phase change energy storage process

CHEN Liang, LIU Daoping, YANG Liang

Institute of New Energy Science and Engineering, School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China

Received:2017-01-09 Revised:2017-07-18 Online:2017-12-31 Published:2017-12-13

摘要/Abstract

摘要： 相变储能是一种基于材料相变过程吸/放热而实现能量储存的技术，已广泛应用在工业企业能量回收领域。本文针对目前相变材料储/释能过程中热导率低引起能量传递慢的问题，从优化储能结构和添加导热填料两方面综述了相变材料储能过程强化传热技术。优化储能结构方面，分析了开式结构和闭式结构对相变传热过程的影响；添加导热填料方面，讨论了金属翅片、导热粒子、导热纤维和多孔金属对相变材料储能传热过程的影响。分析认为，管壳结构的热损失小，传热效果好；多孔金属作为导热填料增强导热效果更好，并提出复合强化传热会成为今后相变储能领域研究的重点。

关键词: 相变材料, 储能, 热导率, 传热强化

Abstract: Phase change energy storage is a kind of energy storage technology based on material phase transition process to absorb energy.It is widely used in industrial energy recovery field.In this paper, the problem of energy transfer is slowed down in the process of storage/release energy of phase change materials.The heat transfer technology of phase change material energy storage process is summarized from the aspects of optimizing the energy storage structure and adding thermal conductivity.In order to optimize the energy storage structure, the influence of the open structure and the closed structure on the phase change heat transfer process is analyzed.The effects of the metal fins, the heat transfer particles, the heat transfer fibers and the porous metal on the energy conversion of the phase change materials are discussed.It is concluded that the heat loss of the shell structure is small and the heat transfer effect is good.The porous metal is better as the thermal conductive filler, and the composite heat transfer will be the focus of the future research.

Key words: phase change materials, energy storage, thermal conductivity, heat transfer enhancement

中图分类号:

TK02

陈亮, 刘道平, 杨亮. 相变储能过程传热强化技术研究进展[J]. 化工进展, 2017, 36(S1): 291-296.

CHEN Liang, LIU Daoping, YANG Liang. Progress of heat transfer enhancement technology in phase change energy storage process[J]. Chemical Industry and Engineering Progress, 2017, 36(S1): 291-296.

参考文献

[1] 于永生,井强山,孙雅倩.低温相变储能材料研究进展[J].化工进展,2010,29(5):896-913. YU Yongsheng,JING Qiangshan,SUN Yaqian.Progress in studied of low temperature phase-change energy storage materials[J].Chemical Industry and Engineering Progress,2010,29(5):896-913.
[2] BOSE P,AMIRTHAM V A.A review on thermal conductivity enhancement of paraffinwax as latent heat energy storage material[J].Renewable & Sustainable Energy Reviews,2016,65:81-100.
[3] KHAN Z,KHAN Z,GHAFOOR A.A review of performance enhancement of PCM based latent heat storage system within the context of materials,thermal stability and compatibility[J].Energy Conversion & Management,2016,115(5):132-158.
[4] KAMKARI B,SHOKOUHMAND H,BRUNO F.Experime-ntal investigation of the effect of inclination angle on convection-driven melting of phase change material in a rectangular enclosure[J].International Journal of Heat & Mass Transfer,2014,72(5):186-200.
[5] ESEN M,DURMU?A,DURMU?A.Geometric design of solar-aided latent heat store depending on various parameters and phase change materials[J].Solar Energy,1998,62(1):19-28.
[6] WANG J,OUYANG Y,CHEN G.Experimental study on charging processes of a cylindrical heat storage capsule employing multiple-phase-change materials[J].International Journal of Energy Research,2001,25(5):439-447.
[7] ADINE H A,QARNIA H E.Numerical analysis of the thermal behaviour of a shell-and-tube heat storage unit using phase change materials[J].Applied Mathematical Modelling,2009,33(4):2132-2144.
[8] VELRAJ R,NALLUSAMY N.Experimental investigation on a combined sensible and latent heat storage unit integrated with solar water heating system[J].Journal of Solar Energy Engineering Transactions of the Asme,2009,131(4):143-155.
[9] CHAN C W,TAN F L.Solidification inside a sphere-an experimental study[J].International Communications in Heat & Mass Transfer,2006,33(3):335-341.
[10] WEI J,KAWAGUCHI Y,HIRANO S,et al.Study on a PCM heat storage system for rapid heat supply[J].Applied Thermal Engineering,2005,25(17):2903-2920.
[11] EFTEKHAR J,HAJI-SHEIKH A,LOU D Y S.Heat transfer enhancement in a paraffin wax thermal storage system[J].Journal of Solar Energy Engineering,1984,106(3):299.
[12] LAMBERG P,LEHTINIEMI R,HENELL A M.Numerical and experimental investigation of melting and freezing processes in phase change material storage[J].International Journal of Thermal Sciences,2004,43(3):277-287.
[13] AKHILESH R,NARASIMHAN A,BALAJI C.Method to improve geometry for heat transfer enhancement in PCM composite heat sinks[J].International Journal of Heat & Mass Transfer,2005,48(13):2759-2770.
[14] MARYAM Gharebaghi,SEZAI I.Enhancement of heat transfer in latent heat storage modules with internal fins[J].Numerical Heat Transfer Applications,2008,53(7):749-765.
[15] LACROIX M,BENMADDA M.Numerical simulation of natural convection-dominated melting and solidification from a finned vertical wall[J].Numerical Heat Transfer Applications,1997,31(1):71-86.
[16] LAMBERG P.Mathematical modelling and experimental investi-gation of melting and solidification in a finned phase change material storage[C].Helsinki University of Technology,2003.
[17] SHATIKIAN V,ZISKIND G,LETAN R.Numerical investig-ation of a PCM-based heat sink with internal fins[J].Inter-national Journal of Heat & Mass Transfer,2005,48(17):3689-3706.
[18] LACROIX M.Study of the heat transfer behavior of a latent heat thermal energy storage unit with a finned tube[J].International Journal of Heat & Mass Transfer,1993,36(8):2083-2092.
[19] ZHANG Z,FANG X.Study on paraffin/expanded graphite composite phase change thermal energy storage material[J].Energy Conversion & Management,2005,47(3):303-310.
[20] ZHOU D,ZHAO C Y.Experimental investigations on heat transfer in phase change materials(PCMs)embedded in porous materials[J].Applied Thermal Engineering,2011,31(5):970-977.
[21] TONG Xinglin,JAMIL A Khan,RUHULAMIN M.Enhance-ment of heat transfer by inserting a metal matrix into a phase change material[J].Numerical Heat Transfer Applications,1996,30(2):125-141.
[22] FUKAI J,OISHI A,KODAMA Y,et al.Improvement of discharge characteristics of latent heat thermal energy storage unit by using carbon fibers[C].5th ASME/JSME Thermal Engineering Joint Conference,San Diego,US,1999.
[23] BOCK Choon Pak,YOUNG I Cho.Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles[J].Experimental Heat Transfer,1998,11(2),151-170.
[24] YU W,XIE H,LI Y,et al.Experimental investigation on the heat transfer properties of Al₂O₃,nanofluids using the mixture of ethylene glycol and water as base fluid[J].Powder Technology,2012,230:14-19.
[25] WU S,ZHU D,ZHANG X,et al.Preparation and melting/freezing characteristics of Cu/paraffin nanofluid as phase-change material(PCM)[J].Energy & Fuels,2010,24(3).DOI:10.1021/ef9013967.
[26] TIMOFEEVA E V,YU W,FRANCE D M,et al.Base fluid and temperature effects on the heat transfer characteristics of SiC in ethylene glycol/H₂O and H₂O nanofluids[J].Journal of Applied Physics,2011,109(1):3-11.
[27] RANJBAR A A,KASHANI S,HOSSEINIZADEH S F,et al.Numerical heat transfer studies of a latent heat storage system containing nano-enhanced phase change material[J].Thermal Science,2011,15(1):169-181.
[28] HOSSEINIZADEH S F,DARZI A A R,TAN F L.Numerical investigations of unconstrained melting of nano-enhanced phase change material(NEPCM)inside a spherical container[J].International Journal of Thermal Sciences,2012,51(1):77-83.
[29] KHODADADI J M,HOSSEINIZADEH S F.Nanoparticle enhanced phase change materials(NEPCM)with great potential for improved thermal energy storage[J].Elsevier,2009,34(5):534-543.
[30] HARISH S,OREJON D,TAKATA Y,et al.Thermal conductivity enhancement of lauric acid phase change nanocomposite with graphene nanoplatelets[J].Applied Thermal Engineering,2015,80:205-210.

相变储能过程传热强化技术研究进展

Progress of heat transfer enhancement technology in phase change energy storage process

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	时雨, 赵运超, 樊智轩, 蒋达华. 夏热冬冷地区相变屋面最佳相变温度的实验研究[J]. 化工进展, 2023, 42(9): 4828-4836.
[2]	汤磊, 曾德森, 凌子夜, 张正国, 方晓明. 相变蓄冷材料及系统应用研究进展[J]. 化工进展, 2023, 42(8): 4322-4339.
[3]	叶振东, 刘涵, 吕静, 张亚宁, 刘洪芝. 基于钙镁二元盐的热化学储能反应器的性能优化[J]. 化工进展, 2023, 42(8): 4307-4314.
[4]	王帅晴, 杨思文, 李娜, 孙占英, 安浩然. 元素掺杂生物质炭材料在电化学储能中的研究进展[J]. 化工进展, 2023, 42(8): 4296-4306.
[5]	汪健生, 张辉鹏, 刘雪玲, 傅煜郭, 朱剑啸. 多孔介质结构对储层内流动和换热特性的影响[J]. 化工进展, 2023, 42(8): 4212-4220.
[6]	杨鹏威, 于琳竹, 王放放, 蒋昊轩, 赵光金, 李琦, 杜铭哲, 马双忱. 氨储能在新型电力系统的应用前景、挑战及发展[J]. 化工进展, 2023, 42(8): 4432-4446.
[7]	李艳玲, 卓振, 池亮, 陈曦, 孙堂磊, 刘鹏, 雷廷宙. 氮掺杂生物炭的制备与应用研究进展[J]. 化工进展, 2023, 42(7): 3720-3735.
[8]	陈飞, 刘成宝, 陈丰, 钱君超, 邱永斌, 孟宪荣, 陈志刚. g-C₃N₄基超级电容器用电极材料的研究进展[J]. 化工进展, 2023, 42(5): 2566-2576.
[9]	张晨宇, 王宁, 徐洪涛, 罗祝清. 纳米颗粒强化传热的多级潜热储热器性能评价[J]. 化工进展, 2023, 42(5): 2332-2342.
[10]	徐玉珍, 蒋达华, 刘景滔, 陈璞. 粉煤灰基相变储能材料的制备及性能[J]. 化工进展, 2023, 42(5): 2595-2605.
[11]	万茂华, 张小红, 安兴业, 龙垠荧, 刘利琴, 管敏, 程正柏, 曹海兵, 刘洪斌. MXene在生物质基储能纳米材料领域中的应用研究进展[J]. 化工进展, 2023, 42(4): 1944-1960.
[12]	张巍, 王锐, 缪平, 田戈. 全球可再生能源电转甲烷的应用[J]. 化工进展, 2023, 42(3): 1257-1269.
[13]	吴伟雄, 谢世伟, 马瑞鑫, 刘吉臻, 汪双凤, 饶中浩. 固-液/气-液多相耦合热控技术应用研究进展[J]. 化工进展, 2023, 42(3): 1143-1154.
[14]	刘丹, 范云洁, 王慧敏, 严政, 李鹏飞, 李家成, 曹雪波. 基于废弃PET的高值化功能性多孔碳材料及其应用进展[J]. 化工进展, 2023, 42(2): 969-984.
[15]	赵西坡, 卞武勋, 冉宝清, 刘进超, 尹少鼎, 孙义明. 石蜡固-固相变材料的制备及性能[J]. 化工进展, 2023, 42(2): 897-906.