化工进展 ›› 2017, Vol. 36 ›› Issue (08): 2986-2993.DOI: 10.16085/j.issn.1000-6613.2016-2277

• 材料科学与技术 • 上一篇    下一篇

电纺制备活性碳纳米纤维及其应用研究进展

林皓1, 赵瑨云1, 胡家朋1, 刘瑞来1,2, 饶瑞晔1   

  1. 1. 武夷学院生态与资源工程学院, 福建省生态产业绿色技术重点实验室, 福建 武夷山 354300;
    2. 福建师范大学材料科学与工程学院, 福建省高分子材料与工程重点实验室, 福建 福州 350007
  • 收稿日期:2016-12-08 修回日期:2017-03-22 出版日期:2017-08-05 发布日期:2017-08-05
  • 通讯作者: 刘瑞来,博士,副教授,主要从事功能高分子材料研究。
  • 作者简介:林皓(1979-),男,硕士,副教授,主要从事天然高分子材料及环境领域研究。E-mail:48717294@qq.com。
  • 基金资助:
    国家自然科学基金(51406141)、福建省教育厅项目(JK2014052,JZ160333)及武夷学院引进人才项目(YJ201501,YJ201704)。

A review on preparation and application of activated carbon nanofibers via electrospinning

LIN Hao1, ZHAO Jinyun1, HU Jiapeng1, LIU Ruilai1,2, RAO Ruiye1   

  1. 1. College of Ecological and Resource Engineering, Fujian Provincial Key Laboratory of Eco-Industrial Green Technology, Wuyi University, Wuyishan 354300, Fujian, China;
    2. Key Laboratory of Polymer Materials of Fujian Province, College of Material Science and Engineering, Fujian Normal University, Fuzhou 350007, Fujian, China
  • Received:2016-12-08 Revised:2017-03-22 Online:2017-08-05 Published:2017-08-05

摘要: 活性碳纳米纤维由于比表面积大、导电、导热性好、孔隙率高等优点,得到人们广泛关注。如何进一步提高其比表面积、孔隙率,特别是微孔和介孔的含量,是活性碳纳米纤维面临的主要问题。电纺技术是一种简单、有效、可大量连续制备纳米纤维的方法。本文介绍了电纺制备纳米纤维前体,再通过预氧化、碳化和活化制备活性碳纳米纤维。详细分析了前体选择、孔结构调控对活性碳纳米纤维结构与性能的影响。前体主要决定活性碳纳米纤维产物的微观孔隙结构,孔隙结构调控主要包括间隙孔、大孔、介孔和微孔的调控。回顾了电纺活性碳纳米纤维在超级电容器电极、电吸附除盐电极、吸附过滤和催化剂及其催化剂载体等领域的应用。并提出今后可将催化剂与活性碳纳米纤维原位负载,在提高催化活性点方面进行更为深入的研究,以期获得更广泛的应用。

关键词: 电纺, 活性碳纤维, 纳米材料, 吸附(作用), 催化剂载体

Abstract: Activated carbon nanofibers with large surface area,high electrical and thermal conductivity and high porosity have gained extensive attention and how to further increase their surface area,porosity,especially micropore and mesopore content has been a hot issue to date. Electrospinning has been proved to be a versatile and effective way to prepare continual nanofibers. Activated carbon nanofibers prepared via as-spun precursor and followed by pre-oxidation,carbonization and activation are summarized. The effect of carbon precursor and pore structure control on the structure and properties of the activated carbon nanofibers are detailed discussed. The microstructure of activated carbon nanofibers were determined by as-spun precursor. The pore structure control,including interstitial pore,macrospore,mesopore and micropore is also introduced in detail. The application of activated carbon nanofibers in super capacitors electrode,electrochemical capacitive deionization,adsorption filtration and catalyst supports are reviewed. It may be expected that catalyst in situ loading on activated carbon nanofibers to increase catalytic active sites would be focused on in the future.

Key words: electrospinning, activated carbon fibers, nanomaterials, adsorption, catalyst support

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn