化工进展 ›› 2023, Vol. 42 ›› Issue (8): 4221-4229.DOI: 10.16085/j.issn.1000-6613.2022-1764

• 能源加工与技术 • 上一篇    下一篇

车载液氢气瓶设计技术的研究进展

郭晋1,2(), 张耕2,3(), 陈国华3, 朱鸣4, 谭粤2, 李蔚2, 夏莉2, 胡昆2   

  1. 1.浙江大学工程师学院,浙江 杭州 310029
    2.广东省特种设备检测研究院,广东 广州 510000
    3.华南理工大学机械与汽车工程学院,广东 广州 510000
    4.中国特种设备检测研究院,北京 100010
  • 收稿日期:2022-09-21 修回日期:2023-05-06 出版日期:2023-08-15 发布日期:2023-09-19
  • 通讯作者: 张耕
  • 作者简介:郭晋(1976—),男,博士研究生,研究方向为氢安全。E-mail:13318804328@189.cn
  • 基金资助:
    广东省重点领域研发计划(2021B0101240001)

Research progress on vehicle liquid hydrogen cylinder design

GUO Jin1,2(), ZHANG Geng2,3(), CHEN Guohua3, ZHU Ming4, TAN Yue2, LI Wei2, XIA Li2, HU Kun2   

  1. 1.School of Engineering, Zhejiang University, Hangzhou 310029, Zhejiang, China
    2.Guangdong Institute of Special Equipment Inspection and Research, Guangzhou 510000, Guangdong, China
    3.School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510000, Guangdong, China
    4.China Special Equipment Inspection and Research Institute, Beijing 100029, China
  • Received:2022-09-21 Revised:2023-05-06 Online:2023-08-15 Published:2023-09-19
  • Contact: ZHANG Geng

摘要:

在化石能源消耗和环境污染的双重压力下,新能源发电及氢能备受关注。氢能燃料电池车辆作为目前最为广泛的氢能终端应用场景,对氢燃料储用系统的重量、存储能力、安全性能提出了更高的要求。车载液氢气瓶以其高密度、轻量化被广泛认为是下一阶段燃料电池车辆燃料箱的重要型式,车载液氢气瓶的安全性、绝热性是目前的关键难题。鉴于氢燃料电池汽车使用环境复杂、事故危害大,车辆的本质安全和高效节能十分重要,但车载液氢气瓶的设计方法并不完善,存在材料脆断、疲劳失效、真空丧失等失效风险。本文针对车载储氢气瓶关键设计环节,从选材、选型、设计和测试环节出发,从液氢气瓶材料韧脆转变性、车载液氢气瓶静动力学分析、车载液氢气瓶疲劳寿命、车载液氢气瓶使用过程及真空丧失后的绝热性能、车载液氢气瓶增压设计和增压传热方面综述了研究的历史发展情况、相关研究进展情况,分析了目前国内外研究的情况,预测了与车载液氢气瓶相关的研究趋势,最后对车载液氢气瓶的设计关键技术做了总结与展望。

关键词: 安全, 氢, 设计, 真空, 深冷

Abstract:

Under the dual pressure of energy consumption and environmental pollution, new energy generation and hydrogen energy have attracted much attention. Hydrogen fuel cell vehicle is the most widely used terminal application scenario of hydrogen energy. The on-board liquid hydrogen cylinder is widely regarded as an important type of fuel tank for fuel cell vehicles in the next stage due to its high density and lightweight. The safety and reliability of on-board liquid hydrogen cylinder are the key problems at present. In view of the complex operating environment and high accident hazards of hydrogen fuel cell vehicles, the essential safety, high efficiency and energy saving of vehicles are very important. However, the design method of on-board liquid hydrogen cylinders is not perfect, and there are failure risks such as brittle material breakage, fatigue failure and vacuum loss. In this paper, the key design links of vehicle-mounted hydrogen storage bottles are discussed from the aspects of material selection, model selection, design and testing. The historical development and related research progress are reviewed on ductile brittle transition of liquid hydrogen cylinder material, and performances of vehicle-mounted liquid hydrogen cylinders, including static and dynamic analysis, using process and the fatigue life, thermal insulation performance after loss of vacuum, pressurization design and boosting heat transfer. The research trend of on-board liquid hydrogen cylinder is forecasted. Finally, the key technology of on-board liquid hydrogen cylinder design is summarized and prospected.

Key words: safety, hydrogen, design, vacuum, cryogenic

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn