废弃墨粉纳米流体的光热特性

doi:10.16085/j.issn.1000-6613.2022-1974

摘要/Abstract

摘要：

在目前的废弃打印机和硒鼓处理中，废弃墨粉往往被忽略，导致弥散到空气中引发呼吸系统疾病。本文以废弃墨粉为吸光材料进行光热利用，采用两步法制备不同浓度的废弃墨粉-乙二醇苯醚纳米流体，研究其稳定性、光学性能和光热转换性能。结果表明：在不添加任何表面活性剂的情况下，废弃墨粉-乙二醇苯醚纳米流体具有较好的稳定性。添加废弃墨粉颗粒可以降低基液的透光率，增大消光系数，从而提高基液的光吸收能力。在光热转换实验中，每种浓度的废弃墨粉纳米流体都表现出较好的光热转换效果，本实验中最佳质量分数为0.04%，在经过1800s的辐照（辐射强度为1000W/m²）后，全程光热转换效率可达54.95%，比基液乙二醇苯醚提高了90.41%。本研究以期为废弃墨粉的转化与再利用提供新思路。

关键词: 废弃墨粉, 集热介质, 纳米流体, 光学特性, 光热转换

Abstract:

Waste toner is ignored in current disposal of waste printers and toner cartridges, causing diffusion into the air and respiratory diseases. To use waste toner as light absorbing material for photothermal conversion, a two-step method was proposed to prepare waste toner-ethylene glycol phenyl ether nanofluids. The stability, optical properties and photothermal conversion properties were studied. The results indicated that the waste toner-ethylene glycol phenyl ether nanofluids had good stability without adding any surfactant, and the light absorption capacity of the base solution could be improved by adding waste toner particles due to the reduction of light transmittance and increase of extinction coefficient. In the photothermal conversion experiment, all concentration of the waste toner nanofluids showed good photothermal conversion effect. The optimal concentration in this experiment was 0.04% and the photothermal conversion efficiency was 54.95%, which was 90.41% higher than that of base solution. This study hoped to provide a new idea for photothermal conversion and reuse of waste toner.

Key words: waste toner, heat collecting medium, nanofluids, optical properties, photothermal conversion

中图分类号:

TK01⁺9

张岱凌, 丁玉梅, 左夏华, 黎昊为, 杨卫民, 阎华, 安瑛. 废弃墨粉纳米流体的光热特性[J]. 化工进展, 2023, 42(9): 4791-4798.

ZHANG Dailing, DING Yumei, ZUO Xiahua, LI Haowei, YANG Weimin, YAN Hua, AN Ying. Photothermal characteristics of waste toner nanofluids[J]. Chemical Industry and Engineering Progress, 2023, 42(9): 4791-4798.

图/表 11

图1 废弃墨粉-乙二醇苯醚纳米流体制备

图2 纳米流体光热转换实验原理1—太阳光模拟器；2—装有集热介质的真空玻璃瓶；3—隔热棉；4—太阳能功率计；5—K型热电偶线；6—数据采集器；7—计算机

图3 墨粉颗粒的能量色散光谱（EDS）图

图4 废弃墨粉-乙二醇苯醚纳米流体的透射电子显微镜（TEM）图像

图5 墨粉-乙二醇苯醚纳米流体照片

图6 废弃墨粉-乙二醇苯醚纳米流体在900nm波长处吸光度随时间变化曲线

图7 废弃墨粉-乙二醇苯醚纳米流体的透射率

图8 废弃墨粉-乙二醇苯醚纳米流体的消光系数曲线

图9 墨粉纳米流体的温升随时间变化曲线

图10 废弃墨粉墨粉纳米流体的全程光热转换效率随时间变化曲线

表1 不同纳米流体光热转换实验结果对比

研究者	分散物	基液	实验最佳浓度/%	光热转换效率/%	光热转换效率比基液提高/%
Hazra等^[31]	BN/炭黑	乙二醇	0.0015	82.50	35
李富恒^[36]	石墨烯	乙二醇	0.0007	76.36	49.65
Guo等^[19]	碳纳米管	水	0.01	65	51.16
Li等^[20]	β-环糊精碳纳米管	乙二醇	0.1	81.30	64.24
Tong等^[25]	碳纳米管/Fe₃O₄	水	0.05	46	76.92
本研究	废弃墨粉	乙二醇苯醚	0.04	54.95	90.41

参考文献 36

1	宋庆彬, 李金惠, 董庆银, 等. 我国废旧硒鼓墨盒回收与处理现状研究[J]. 环境工程, 2015, 33(7): 113-117.
	SONG Qingbin, LI Jinhui, DONG Qingyin, et al. Studies on recycling and treatment status of waste toner and ink cartridges in china[J]. Environmental Engineering, 2015, 33(7): 113-117, 108.
2	茆吉庆, 黎阳, 蒋诗, 等. 废弃墨粉的回收及其电化学储能应用研究[J]. 环境工程, 2016, 34(S1): 715-718.
	MAO Jiqing, LI Yang, JIANG Shi, et al. Recycling of waste toner and its application in electrochemical energy storage[J]. Environmental Engineering, 2016, 34(S1): 715-718.
3	章雨勤, 程知萱, 张源, 等. 利用废弃硒鼓墨粉制备γ-Fe₂O₃气敏材料[J]. 郑州大学学报(工学版), 2016, 37(4): 44-48.
	ZHANG Yuqin, CHENG Zhixuan, ZHANG Yuan, et al. Use of waste toner cartridges for preparing γ-Fe₂O₃ sensitive material[J]. Journal of Zhengzhou University (Engineering Science), 2016, 37(4): 44-48.
4	KHEDAYWI T S. Study on utilising waste toner in asphalt cement[J]. Road Materials and Pavement Design, 2014, 15(2): 446-454.
5	李诗琦, 李闯民, 李元元. 回收碳粉改性沥青制备参数及性能研究[J]. 石油沥青, 2016, 30(6): 25-30.
	LI Shiqi, LI Chuangmin, LI Yuanyuan. Preparation parameters and performance study of recycled carbon powder modified asphalt[J]. Petroleum Asphalt, 2016, 30(6): 25-30.
6	宗美林, 叶晓江, 常怀钟, 等. 水基碳纳米管纳米流体在室外自然条件下的光热性能研究[J]. 太阳能学报, 2020, 41(5): 48-53.
	ZONG Meilin, YE Xiaojiang, CHANG Huaizhong, et al. Study on photo-thermal conversion characteristics of water-based carbon nanotubes in outdoor natural condition[J]. Acta Energiae Solaris Sinica, 2020, 41(5): 48-53.
7	屈健, 张若梅, 田敏. 氧化铜-碳纳米管/水混合纳米流体的光热性能[J]. 化工进展, 2018, 37(6): 2125-2131.
	QU Jian, ZHANG Ruomei, TIAN Min. Photo-thermal properties of hybrid CuO-MWCNT/H₂O nanofluids[J]. Chemical Industry and Engineering Progress, 2018, 37(6): 2125-2131.
8	周玲, 尹淼, 陈钰琦, 等. 油基CuO和HgS纳米流体的光热转换特性研究[J]. 太阳能学报, 2017, 38(6): 1620-1625.
	ZHOU Ling, YIN Miao, CHEN Yuqi, et al. Photothermal conversion properties of oil-based CuO and HgS nanofluids[J]. Acta Energiae Solaris Sinica, 2017, 38(6): 1620-1625.
9	HAZRA S K, GHOSH S, NANDI T K. Photo-thermal conversion characteristics of carbon black-ethylene glycol nanofluids for applications in direct absorption solar collectors[J]. Applied Thermal Engineering, 2019, 163: 114402.
10	刘闪威. 槽式太阳能熔盐集热传热的试验研究[D]. 北京: 北京工业大学, 2013.
	LIU Shanwei. Experimental study on heat transfer with molten salt in trough solar collector system[D]. Beijing: Beijing University of Technology, 2013.
11	SAIDUR R, MENG T C, SAID Z, et al. Evaluation of the effect of nanofluid-based absorbers on direct solar collector[J]. International Journal of Heat and Mass Transfer, 2012, 55(21/22): 5899-5907.
12	凌智勇, 黄跃涛, 张忠强, 等. 表面活性剂对Cu-H₂O和ZrO₂-H₂O纳米流体稳定性的影响[J]. 功能材料, 2015, 46(10):10100-10103.
	LING Zhiyong, HUANG Yuetao, ZHANG Zhongqiang, et al. Effect of surfactants on the stability of Cu-H₂O and ZrO₂-H₂O nanofluids[J]. Journal of Functional Materials, 2015, 46(10):10100-10103.
13	王良虎, 向军, 李菊香. 纳米流体的稳定性研究[J]. 材料导报, 2011, 25(S1): 17-20.
	WANG Lianghu, XIANG Jun, LI Juxiang. Study on stability of nanofluid[J]. Materals Review, 2011, 25(S1): 17-20.
14	MEHRALI M, GHATKESAR M K, PECNIK R. Full-spectrum volumetric solar thermal conversion via graphene/silver hybrid plasmonic nanofluids[J]. Applied Energy, 2018, 224: 103-115.
15	WANG Han, YANG Weimin, CHENG Lisheng, et al. Chinese ink: High performance nanofluids for solar energy[J]. Solar Energy Materials and Solar Cells, 2018, 176: 374-380.
16	ZEINY A, JIN H C, BAI L Z, et al. A comparative study of direct absorption nanofluids for solar thermal applications[J]. Solar Energy, 2018, 161: 74-82.
17	MENG Zhaoguo, HAN Dongxiao, WU Daxiong, et al. Thermal conductivities, rheological behaviors and photothermal properties of ethylene glycol-based nanofluids containing carbon black nanoparticles[J]. Procedia Engineering, 2012, 36: 521-527.
18	KHOSROJERDI S, LAVASANI A, VAKILI M. Experimental study of photothermal specifications and stability of graphene oxide nanoplatelets nanofluid as working fluid for low-temperature direct absorption solar collectors (DASCs)[J]. Solar Energy Materials and Solar Cells, 2017, 164: 32-39.
19	GUO Chenglong, LIU Can, JIAO Shaokai, et al. Introducing optical fiber as internal light source into direct absorption solar collector for enhancing photo-thermal conversion performance of MWCNT-H₂O nanofluids[J]. Applied Thermal Engineering, 2020, 173: 115207.
20	LI Xiaoke, CHEN Wenjing, ZOU Changjun. An experimental study on β-cyclodextrin modified carbon nanotubes nanofluids for the direct absorption solar collector (DASC): Specific heat capacity and photo-thermal conversion performance[J]. Solar Energy Materials and Solar Cells, 2020, 204: 110240.
21	JEONG M G, KIM J B, QIN C Y, et al. Synthesis of therminol-graphite nanofluids and photo-thermal conversion properties[J]. International Journal of Energy Research, 2021, 45(7): 11320-11328.
22	TANG Zhenglai, SONG Dongxing, MA Weigang, et al. Two-level synergistic scatterings from porosity and particle aggregation in Cu nanofluids for the enhancement of solar thermal conversion[J]. Journal of Molecular Liquids, 2021, 342: 116940.
23	KIMPTON H, ZHANG X L, STULZ E. The temperature stability and development of a broadband silver nanofluid for solar thermal applications[J]. Energy Reports, 2021, 7: 87-96.
24	CHEN Meijie, HE Yurong, HUANG Jian, et al. Investigation into Au nanofluids for solar photothermal conversion[J]. International Journal of Heat and Mass Transfer, 2017, 108: 1894-1900.
25	TONG Y J, BOLDOO T, HAM J, et al. Improvement of photo-thermal energy conversion performance of MWCNT/Fe₃O₄ hybrid nanofluid compared to Fe₃O₄ nanofluid[J]. Energy, 2020, 196:117086.
26	KARAMI M, AKHAVAN-BEHABADI M A, RAISEE DEHKORDI M, et al. Thermo-optical properties of copper oxide nanofluids for direct absorption of solar radiation[J]. Solar Energy Materials and Solar Cells, 2016, 144: 136-142.
27	ESMAEILI M, KARAMI M, DELFANI S. Performance enhancement of a direct absorption solar collector using copper oxide porous foam and nanofluid[J]. International Journal of Energy Research, 2020, 44(7): 5527-5544.
28	HATAMI M, JING D W. Evaluation of wavy direct absorption solar collector (DASC) performance using different nanofluids[J]. Journal of Molecular Liquids, 2017, 229: 203-211.
29	CHEN Wenjing, ZOU Changjun, LI Xiaoke. An investigation into the thermophysical and optical properties of SiC/ionic liquid nanofluid for direct absorption solar collector[J]. Solar Energy Materials and Solar Cells, 2017, 163: 157-163.
30	MENG Zhaoguo, LI Yang, CHEN Nan, et al. Broad-band absorption and photo-thermal conversion properties of zirconium carbide aqueous nanofluids[J]. Journal of the Taiwan Institute of Chemical Engineers, 2017, 80: 286-292.
31	HAZRA S K, MICHAEL M, NANDI T K. Investigations on optical and photo-thermal conversion characteristics of BN-EG and BN/CB-EG hybrid nanofluids for applications in direct absorption solar collectors[J]. Solar Energy Materials and Solar Cells, 2021, 230: 111245.
32	WANG Kongxiang, HE Yan, LIU Pengyu, et al. Highly-efficient nanofluid-based direct absorption solar collector enhanced by reverse-irradiation for medium temperature applications[J]. Renewable Energy, 2020, 159: 652-662.
33	王威, 王宝群, 刘京玲, 等. 墨粉的制备及发展概况[J]. 中国材料进展, 2012, 31(1): 1-7.
	WANG Wei, WANG Baoqun, LIU Jingling, et al. Situation for toner production and development[J]. Materials China, 2012, 31(1): 1-7.
34	何钦波. 外加磁场强化磁性纳米流体的光热特性及机理研究[D]. 广州: 华南理工大学, 2015.
	HE Qinbo. Experimental investigation on photothermal properties of magnetic nanofluids under magnetic field[D]. Guangzhou: South China University of Technology, 2015.
35	PAK B C, CHO Y I. Hydrodynamic and heat transfer study of dispersed fluids with submicron metallic oxide particles[J]. Experimental Heat Transfer, 1998, 11(2): 151-170.
36	李富恒. 石墨烯纳米片-乙二醇纳米流体光热转化特性研究[J]. 化工学报, 2020, 71(S1): 479-485.
	LI Fuheng. Investigation on photothermal conversion characteristics of graphene nanosheets-glycol nanofluids[J]. CIESC Journal, 2020, 71(S1): 479-485.

[1]	娄宝辉, 吴贤豪, 张驰, 陈臻, 冯向东. 纳米流体用于二氧化碳吸收分离研究进展[J]. 化工进展, 2023, 42(7): 3802-3815.
[2]	郭文杰, 翟玉玲, 陈文哲, 申鑫, 邢明. Al₂O₃-CuO/水混合纳米流体对流传热性能及热经济性分析[J]. 化工进展, 2023, 42(5): 2315-2324.
[3]	郝旭波, 牛宝联, 郭昊天, 徐祥和, 张忠斌, 李应林. 相变微胶囊改性及其在光热转换中的应用[J]. 化工进展, 2023, 42(2): 854-871.
[4]	陆诗建, 刘玲, 刘滋武, 郭伯文, 俞徐林, 梁艳, 赵东亚, 朱全民. AEP-DPA-CuO相变纳米流体吸收CO₂稳定性[J]. 化工进展, 2022, 41(8): 4555-4561.
[5]	李佩珊, 张梦辰, 李铭杰, 郑文镳, 刘敏超, 谢高艺, 徐晓龙, 刘长宇, 郏建波. 基于二维材料膜构筑纳米流体通道的研究进展[J]. 化工进展, 2022, 41(7): 3745-3757.
[6]	李钰璨, 胡定华, 刘锦辉. 氧化铝纳米流体液滴瞬态蒸发速率的演化特性分析[J]. 化工进展, 2022, 41(7): 3493-3501.
[7]	林清宇, 王祝, 冯振飞, 凌彪, 陈镇. 扭带结构影响管内传热与熵产的研究进展[J]. 化工进展, 2022, 41(11): 5709-5721.
[8]	王英梅, 牛爱丽, 张兆慧, 展静, 张学民. 二氧化碳水合物快速生成方法研究进展[J]. 化工进展, 2021, 40(S2): 117-125.
[9]	禹言芳, 陈雅鑫, 孟辉波, 王宗勇, 吴剑华. Lightnin静态混合器内纳米流体湍流传热特性分析[J]. 化工进展, 2021, 40(S2): 30-39.
[10]	马明琰, 翟玉玲, 轩梓灏, 周树光, 李志祥. 三元混合纳米流体稳定性及热性能[J]. 化工进展, 2021, 40(8): 4179-4186.
[11]	臧徐忠,石尔,傅俊萍,余涛. 磁场调控磁性纳米流体流动和传热研究进展[J]. 化工进展, 2019, 38(12): 5410-5419.
[12]	翟玉玲,王江,李龙,马明琰,姚沛滔. 粒径混合比对Al₂O₃/水纳米流体传热性能影响及评价[J]. 化工进展, 2019, 38(11): 4865-4872.
[13]	李原,狄勤丰,华帅,张景楠,叶峰,王文昌. 纳米流体对储层润湿性反转提高石油采收率研究进展[J]. 化工进展, 2019, 38(08): 3612-3620.
[14]	闫鑫, 徐进良. 太阳能加热液滴在亲疏水表面“黏-滑”蒸发[J]. 化工进展, 2019, 38(06): 2618-2625.
[15]	章学来,郑钦月,田镇,王章飞,贾潇雅,陈跃,周鑫晨,甘伟. 纳米TiO₂ 流体表面改性及对真空闪蒸制冰的影响[J]. 化工进展, 2019, 38(03): 1197-1206.