化工进展 ›› 2022, Vol. 41 ›› Issue (1): 227-236.DOI: 10.16085/j.issn.1000-6613.2021-0258

• 工业催化 • 上一篇    下一篇

等离子体与Cu-Pd/S-1催化剂协同催化甲烷转化制低碳烯烃

毕文菲(), 代成义(), 李雪梅, 贺建勋, 赵彬然, 马晓迅()   

  1. 西北大学化工学院,国家碳氢资源清洁利用国际科技合作基地,陕北能源先进化工利用技术教育部工程研究 中心,陕西省洁净煤转化工程技术研究中心,陕北能源化工产业发展协同创新中心,陕西 西安 710069
  • 收稿日期:2021-02-04 修回日期:2021-03-08 出版日期:2022-01-05 发布日期:2022-01-24
  • 通讯作者: 代成义,马晓迅
  • 作者简介:毕文菲(1995—),女,硕士研究生,研究方向为非热等离子体条件下CH4转化。E-mail:1106380402@qq.com

Synergistic catalysis of methane to light olefins by plasma and Cu-Pd/S-1 catalyst

BI Wenfei(), DAI Chengyi(), LI Xuemei, HE Jianxun, ZHAO Binran, MA Xiaoxun()   

  1. School of Chemical Engineering, Northwest University; International Science and Technology Cooperation Base of MOST for Clean Utilization of Hydrocarbon Resources; Chemical Engineering Research Center of the Ministry of Education for Advance Use Technology of Shanbei Energy; Shaanxi Research Center of Engineering Technology for Clean Coal Conversion; Collaborative Innovation Center for Shanbei Energy and Chemical Industry Development, Xi’an 710069, Shaanxi, China
  • Received:2021-02-04 Revised:2021-03-08 Online:2022-01-05 Published:2022-01-24
  • Contact: DAI Chengyi,MA Xiaoxun

摘要:

采用等体积浸渍法制备了Pd、Cu-Pd改性的S-1催化剂,利用介质阻挡放电(DBD)等离子体反应器研究了甲烷无氧转化制低碳烯烃(C2~C4=)的性能,重点关注了乙烯的产量。探讨了Ar的添加和特定输入能量(SIE)对甲烷转化率以及产物分布的影响。实验结果表明,等离子体与催化剂协同催化与仅使用等离子体相比性能更优异,使乙烯选择性提高了3.1倍,C2~C4=的选择性提高了2.7倍;与S-1相比,Pd/S-1具有更高的乙烯选择性,这是因为在S-1上负载金属Pd有助于乙炔原位加氢生成乙烯;适宜的Pd负载量有利于提高烯烃选择性,而过高的Pd负载量倾向于不饱和烃的连续加氢,导致了烷烃的生成;与单金属Pd改性相比,Cu-Pd双金属改性抑制了乙烯的进一步加氢,提高了乙烯的选择性。通过扫描电子显微镜(SEM)、透射电子显微镜(TEM)、高倍透射电子显微镜(HRTEM)、X射线粉末衍射(XRD)、X射线光电子能谱(XPS)对催化剂进行了表征分析。结果表明,Cu的加入使自身电子向Pd转移,增加了Pd电子密度;另外,Cu的存在提高了Pd的分散性。以2Cu-0.1Pd/S-1为催化剂时可以得到更优异的反应性能。

关键词: 甲烷, 加氢, 催化, 低碳烯烃, 介质阻挡放电(DBD)反应器

Abstract:

The Pd or Cu-Pd modified S-1 catalyst was prepared by an equivalent volume impregnation method. A dielectric barrier discharge (DBD) plasma reactor was used to study the nonoxidative conversion of methane to light olefins (C2—C4=), focusing on the production of ethylene. The effects of the Ar addition and specific input energy (SIE) on methane conversion and product distribution were investigated. The experimental results showed that the catalytic performance of plasma-catalyst cooperation was better than that of plasma-only mode. The selectivity of ethylene was increased by a factor of 3.1 and the selectivity of C2—C4= was increased by a factor of 2.7. Compared with S-1, Pd/S-1 provided higher ethylene selectivity. This is because the metal Pd supported on S-1 promoted the in-situ hydrogenation of acetylene to ethylene. The suitable Pd loading was beneficial towards achieving higher olefins selectivity, while excessive Pd loading caused continuous hydrogenation of unsaturated hydrocarbons so that the production was alkanes. Compared with single metal Pd modification, Cu-Pd bimetal modification inhibited further hydrogenation of ethylene and improved the selectivity of ethylene. The catalysts were characterized by using SEM, TEM, HRTEM, XRD, XPS. The results showed that the addition of Cu transferred its own electrons to Pd, which increased the electron density of Pd. In addition, the presence of Cu improved the dispersibility of Pd. Better reaction performance were obtained with the 2Cu-0.1Pd/S-1 catalyst.

Key words: methane, hydrogenation, catalysis, light olefins, dielectric barrier discharge (DBD) reactor

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn