1 |
XU J L, ZHANG X M. Start-up and steady thermal oscillation of a pulsating heat pipe[J]. Heat Mass Transfer, 2005, 41(8): 685-694.
|
2 |
徐荣吉, 王瑞祥, 丛伟, 等. 脉动热管实验台的搭建及可视化实验研究[J]. 流体机械, 2007, 35(6): 59-62.
|
|
XU R J, WANG R X, CONG W, et al. Design of pulsating heat pipe experiment rig and visual experiment study[J]. Fluid Machinery, 2007, 35(6): 59-62.
|
3 |
孙潇, 韩东阳, 焦波, 等. 脉动热管可视化实验研究进展[J]. 化工进展, 2018, 37(8): 2880-2891.
|
|
SUN X, HAN D Y, JIAO B, et al. Research progress on visualization of pulsating heat pipes[J]. Chemical Industry and Engineering Progress, 2018, 37(8): 2880-2891.
|
4 |
LIM J, KIM S J. Fabrication and experimental evaluation of a polymer-based flexible pulsating heat pipe[J]. Energy Conversion & Management, 2018, 156: 358-364.
|
5 |
JUN S, KIM S J. Comparison of the thermal performances and flow characteristics between closed-loop and closed-end micro pulsating heat pipes[J]. International Journal of Heat and Mass Transfer, 2016, 95: 890-901.
|
6 |
CLEMENT J, WANG X. Experimental investigation of pulsating heat pipe performance with regard to fuel cell cooling application[J]. Applied Thermal Engineering, 2013, 50(1): 268-274.
|
7 |
崔晓钰, 王妍, 翁建华, 等. 不同工质振荡热管的传热性能[J]. 上海理工大学学报, 2009, 31(6): 539-543.
|
|
CUI X Y, WANG Y, WENG J H, et al. Experimental study on pulsating heat pipe with different working fluids[J]. Journal of University of Shanghai for Science and Technology, 2009, 31(6): 539-543.
|
8 |
崔晓钰, 于洋, 朱悦, 等. 振荡热管传热性能与工质物性关系分析[J]. 化工进展, 2013, 32(9): 2035-2042.
|
|
CUI X Y, YU Y, ZHU Y, et al. Correlation study on physical properties of working fluids and heat transfer performance of pulsating heat pipes[J]. Chemical Industry and Engineering Progress, 2013, 32(9): 2035-2042.
|
9 |
SARANGI R K, RANE M V. Experimental investigations for start up and maximum heat load of closed loop pulsating heat pipe[J]. Procedia Engineering, 2013, 51: 683-687.
|
10 |
黄生云, 郭航, 叶芳. 热管启动性能研究进展[J]. 现代化工, 2009, 29(7): 27-30.
|
|
HUANG S Y, GUO H, YE F. Advances in study of start-up performance of heat pipes[J]. Modern Chemical Industry, 2009, 29(7): 27-30.
|
11 |
刘玉东, 周跃国, 周小三, 等. 脉动热管启动及运行问题研究进展[J]. 昆明理工大学学报, 2010, 35(1): 67-73.
|
|
LIU Y D, ZHOU Y G, ZHOU X S, et al. Advances in start-up studies and operation of pulsating heat pipe[J]. Journal of Kunming University of Science and Technology, 2010, 35(1): 67-73.
|
12 |
徐荣吉, 王瑞祥, 丛伟, 等. 脉动热管启动过程的实验研究[J]. 西安交通大学学报, 2007, 41(5): 530-533.
|
|
XU R J, WANG R X, CONG W, et al. Experimental study on start-up process of pulsating heat pipe[J]. Journal of Xi’an Jiaotong University, 2007, 41(5): 530-533.
|
13 |
刘向东, 陈永平, 张程宾, 等. 闭式脉动热管启动性能的实验研究[J]. 宇航学报, 2011, 32(10): 2300-2304.
|
|
LIU X D, CHEN Y P, ZHANG C B, et al. Experimental study on start-up performance of closed loop pulsating heat pipe[J]. Journal of Astronautics, 2011, 32(10): 2300-2304.
|
14 |
王迅, 肖冲, 李月月. 甲醇、丙酮及其二元混合工质脉动热管的启动特性[J]. 化工进展, 2016, 35(9): 2678-2684.
|
|
WANG X, XIAO C, LI Y Y. Experimental study on the start-up characteristic of pulsating heat pipe with methanol/acetone and binary mixed working fluids[J]. Chemical Industry and Engineering Progress, 2016, 35(9): 2678-2684.
|
15 |
王迅, 李月月. 甲醇水溶液脉动热管启动特性研究[J]. 化学工程, 2017, 45(6): 17-21.
|
|
WANG X, LI Y Y. Start-up characteristic of pulsating heat pipe with aqueous methanol as working fluid[J]. Chemical Engineering, 2017, 45(6): 17-21.
|
16 |
李雪娇, 贾力, 陆谦逸. 低沸点工质板式脉动热管传热特性研究[J]. 工程热物理学报, 2014, 35(12): 2457-2460.
|
|
LI X J, JIA L, LU Q Y. Effect of low-boiling point fluid on pulsating heat pipe transfer performance[J]. Journal of Engineering Thermophysics, 2014, 35(12): 2457-2460.
|
17 |
HAN H, CUI X, ZHU Y, et al. Experimental study on a closed-loop pulsating heat pipe (CLPHP) charged with water-based binary zeotropes and the corresponding pure fluids[J]. J. Energy, 2016, 109: 724-736.
|
18 |
HAN H, CUI X, ZHU Y, et al. A comparative study of the behavior of working fluids and their properties on the performance of pulsating heat pipes (PHP)[J]. International Journal of Thermal Sciences, 2014, 82: 138-147.
|