化工进展

• 材料科学与技术 • 上一篇    下一篇

纤维膜聚结脱除双酚A反应液中残留的游离酸

唐晓东1,2,王 燕2,李晶晶2,刘海燕2   

  1. 1西南石油大学油气藏地质及开发工程国家重点实验室,四川 成都 610500;2西南石油大学化学化工学院, 四川 成都 610500
  • 出版日期:2012-07-05 发布日期:2012-07-05

Coalescence removal of residual free acid from bisphenol A resultant with fiber membrane

TANG Xiaodong1,2,WANG Yan2,LI Jingjing2,LIU Haiyan2   

  1. 1State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu 610500,Sichuan,China;2School of Chemistry and Chemical Engineering,Southwest Petroleum University, Chengdu 610500,Sichuan,China
  • Online:2012-07-05 Published:2012-07-05

摘要: 研究了纤维膜聚结技术用于脱除双酚A反应液中残留游离酸的实验条件和纤维膜床层的再生条件。结果表明,在聚结温度70 ℃、95%乙醇用量2%、空速20~30 h-1、纤维膜床层体积1.0 cm3的条件下,可使双酚A反应液的酸度从0.014 mmol/L脱除至≤0.001mmol/L,满足双酚A反应液对酸度的要求;当双酚A反应液的处理量达到纤维膜床层体积的60倍时,床层必须采用丙酮进行再生;在丙酮用量6 mL和再生温度50 ℃的条件下,纤维膜床层可以得到完全再生。

关键词: 双酚A反应液, 残留游离酸, 纤维膜床层, 聚结脱酸, 再生

Abstract: The influence of reaction and recycling conditions for coalescence removal of residual free acid from bisphenol A resultant with fiber membrane were investigated. The experiment results showed that at 70 ℃,2% ethanol added,space velocity 20~30 h-1 and 1.0 cm3 fiber membrane bed,the bisphenol A resultant acidity decreased from 0.014mmol/L to 0.001 mmol/L,which met the acidity requirement for bisphenol A resultant . When the disposal amount of bisphenol A resultant reached 60 times of the fiber membrane layer volume,the layer must be recycled with acetone. By experiments,the best recycling temperature was 50 ℃ and acetone dosage was 6 mL.

Key words: bisphenol A resultant, residual free acid, fiber membrane bed, coalescence removal of acid, regeneration

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn