化工进展 ›› 2012, Vol. 31 ›› Issue (03): 518-522.

• 化工过程与装备 • 上一篇    下一篇

纤维素助滤剂的预敷过滤性能

张 越1,许 莉1,都丽红1,2,鲁淑群1   

  1. 1天津大学化工学院,天津 300072;2上海化工研究院,上海 200062)
  • 出版日期:2012-03-05 发布日期:2012-03-05

Precoat filtration performance of cellulose filter aid

ZHANG Yue1XU Li1DU Lihong1,2LU Shuqun1   

  1. 1School of Chemical Engineering,Tianjin University,Tianjin 300072,China;2Shanghai Chemical Research Institute,
    Shanghai 200062,China)
  • Online:2012-03-05 Published:2012-03-05

摘要: 对高黏度物料加入纤维素助滤剂的预敷过滤性能进行了研究,说明不同的预敷条件对预敷层的过滤性能会有很大影响。通过改变预敷压力和浓度,对纤维素滤饼层的过滤比阻、可压缩性系数和孔隙率进行了研究。实验表明,纤维素预敷层的比阻随压力增加而增加,随浓度增加而减小;孔隙率随压力增加而减小,随浓度增加而增加;可压缩性系数随浓度增加而增加。纤维素助滤剂为中等可压缩性物料,孔隙率大。研究结果可为高黏度物料用纤维素预敷过滤的工程应用提供参考。

关键词: 纤维素, 预敷过滤, 孔隙率, 比阻, 可压缩性系数

Abstract: In this paper,a study of precoat filtration with cellulose filter aid added to high viscosity materials is presented. Different precoat filtration conditions greatly affect the filtration performance of a precoat cake layer. Specific resistance,compressibility coefficient and porosity of cellulose cake layer were studied by changing precoat pressure and concentration. Experimental results show that the specific resistance of cellulose precoat layer increases as pressure drop increases and decreases as concentration increases;the porosity of cellulose precoat layer decreases as pressure drop increases and increases as concentration increases;the compressibility coefficient of cellulose precoat layer increases as concentration increases. Cellulose filter aid is moderately compressible material. The cellulose precoat layer has high porosity. The results provide a reference for engineering applications of precoat filtration with cellulose added to high viscosity materials.

Key words: cellulose, precoat filtration, porosity, specific resistance, compressibility coefficient

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn