化工进展 ›› 2024, Vol. 43 ›› Issue (9): 5242-5249.DOI: 10.16085/j.issn.1000-6613.2023-1310

• 资源与环境化工 • 上一篇    

实际规模PN/A工艺载体挂膜性能与微生物群落

赵星程(), 贾方旭(), 刘晨雨, 韩宝红, 梅宁, 姚宏   

  1. 北京交通大学环境学院,水中典型污染物控制与水质保障北京重点实验室,北京 100044
  • 收稿日期:2023-07-30 修回日期:2023-10-29 出版日期:2024-09-15 发布日期:2024-09-30
  • 通讯作者: 贾方旭
  • 作者简介:赵星程(1992—),男,博士研究生,研究方向为厌氧氨氧化污水脱氮处理。E-mail:20115052@bjtu.edu.cn
  • 基金资助:
    中央高校基本科研业务费专项资金(2023XKRC023)

Biofilm attachment performances and microbial communities of the carriers in full-scale PN/A process

ZHAO Xingcheng(), JIA Fangxu(), LIU Chenyu, HAN Baohong, MEI Ning, YAO Hong   

  1. Beijing Key Laboratory of Aqueous Typical Pollutants Control and Water Quality Safeguard, School of Environment, Beijing Jiaotong University, Beijing 100044, China
  • Received:2023-07-30 Revised:2023-10-29 Online:2024-09-15 Published:2024-09-30
  • Contact: JIA Fangxu

摘要:

由于厌氧氨氧化菌生长速度相对缓慢,在工业上通常采用添加载体填料的方式缩短反应器启动时间。为了评估不同载体对厌氧氨氧化微生物的挂膜效果,在处理煤化工废水的实际规模固定生物膜-活性污泥(IFAS)反应池中,测试了聚氨酯(PU)、聚乙烯(PE)和聚乙烯醇(PVA)3种载体的挂膜效果。结果表明,第110天时,3种载体均形成成熟的生物膜,PU、PE和PVA载体生物富集量分别为(3.84±0.36)mg VSS/(cm3填料)、(2.40±0.41)mg VSS/(cm3填料)和(1.82±0.17)mg VSS/(cm3填料),胞外聚合物(EPS)含量分别为(0.250±0.022)mg/(cm3填料)、(0.018±0.0031)mg/(cm3填料)和(0.0096±0.0018)mg/(cm3填料);并且,在面对水质波动和系统故障时,PU载体也表现出更强的稳定性和抗冲击能力。此外,PU载体中的微生物具有更复杂的网络拓扑结构,可为微生物的栖息提供更多可利用的底物及营养物质,同时,微生物的互作关系也更加紧密。以上结果表明,相对PE和PVA而言,PU更适合作为厌氧氨氧化工艺的生物膜载体。

关键词: 厌氧氨氧化, 固定化, 生物膜, 群落特性, 生物反应器

Abstract:

Due to the relatively slow growth rate of anammox bacteria, the reactor start-up time is usually shortened in industry by adding carrier fillers. In order to evaluate the effect of carriers on the film attachment of anammox bacteria, three carriers, polyurethane (PU), polyethylene (PE) and polyvinyl alcohol (PVA), were tested in a real-scale IFAS reactor treating coal chemical wastewater. At 110d, all three carriers formed mature biofilms, with bio-enrichment of (3.84±0.36)mg VSS/(cm3 filler), (2.40±0.41)mg VSS/(cm3 filler) and (1.82±0.17)mg VSS/(cm3 filler) for PU, PE and PVA carriers, and EPS contents of (0.250±0.022)mg/(cm3 filler), (0.018±0.0031)mg/(cm3 filler) and (0.0096±0.0018)mg/(cm3 filler), respectively; moreover, PU carriers showed more excellent stability and shock resistance in the face of water quality fluctuations and system failure. In addition, the microorganisms in PU carriers had a more complex network topology, which could provide more available substrates and nutrients for microbial habitats, and the microbial interactions were also closer. The above results indicated that PU carriers were more suitable as biofilm carriers for the anammox process than PE and PVA carriers.

Key words: Anammox, immobilization, biofilm, community characterization, bioreactors

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn