化工进展 ›› 2021, Vol. 40 ›› Issue (4): 2328-2337.DOI: 10.16085/j.issn.1000-6613.2020-1049

• 资源与环境化工 • 上一篇    下一篇

燃煤烟气中SO3与NH4HSO4生成特性及其控制方法研究进展

尹子骏1(), 苏胜1(), 王中辉1, 王乐乐2, 安晓雪1, 赵志刚1, 陈逸峰1, 刘涛1, 汪一1, 胡松1, 向军1   

  1. 1.华中科技大学煤燃烧国家重点实验室,湖北 武汉 430074
    2.西安热工研究院有限公司苏州分公司,江苏 苏州 215153
  • 收稿日期:2020-06-10 出版日期:2021-04-05 发布日期:2021-04-14
  • 通讯作者: 苏胜
  • 作者简介:尹子骏(1996—),男,硕士研究生,研究方向为SO3生成控制。E-mail:291300330@qq.com
  • 基金资助:
    国家自然科学基金(51976072)

Research progress on the characteristics and control methods of SO3 and NH4HSO4 formation in coal-fired flue gas

YIN Zijun1(), SU Sheng1(), WANG Zhonghui1, WANG Lele2, AN Xiaoxue1, ZHAO Zhigang1, CHEN Yifeng1, LIU Tao1, WANG Yi1, HU Song1, XIANG Jun1   

  1. 1.State Key Laboratory of Coal Combustion, Huazhong University of Science & Technology, Wuhan 430074, Hubei, China
    2.Xi’an Thermal Power Research Institute Company Limited, Suzhou Branch, Suzhou 215153, Jiangsu, China
  • Received:2020-06-10 Online:2021-04-05 Published:2021-04-14
  • Contact: SU Sheng

摘要:

在燃煤烟气中选择性催化还原(SCR)技术由于脱硝效率高、选择性好被广泛应用,然而SCR催化剂的催化作用会使烟气中的SO2氧化成SO3,SO3会与NH3等反应生成硫酸氢铵(ABS)和硫酸铵(AS),当烟气温度低于硫酸铵盐的凝结温度时,其会沉积在催化剂、空预器及其附属设备上,引发诸多严重的问题,对电厂的运行和环境造成了不利影响。本文综述了燃煤烟气中SO3与硫酸氢铵的生成特性及其控制方法最新进展,分析了SO3在锅炉和SCR系统中的形成机理、迁徙转化特性,阐述了控制SO3与硫酸氢铵生成的方法,介绍了不同活性组分对催化剂表面SO3和硫酸氢铵生成的影响。最后提出了开发新型催化剂是燃煤烟气中SO3与硫酸氢铵生成控制的重点研究方向。

关键词: 三氧化硫, 氮氧化物, 选择性催化还原催化剂, 硫酸氢铵

Abstract:

SCR technology is widely used in treating coal-fired flue gas due to its high denitrification efficiency and good selectivity. However, SCR catalyst will oxidize the SO2 in flue gas to SO3, which will subsequently react with NH3 to generate ammonium bisulfate (ABS) and ammonium sulfate (AS). When the flue gas temperature is lower than the precipitation temperature of ammonium sulfate, it will deposit on the catalyst, air preheater and other attached equipment, which has caused many serious problems and brought a negative impact on the operation and environment of power plant. In this paper, the characteristics and control methods of SO3 and ammonium bisulfate formation in coal-fired flue gas are reviewed. The formation mechanism and migration transformation characteristics of SO3 in boiler and SCR system are analyzed. The effects of different active components on the generation of SO3 and ammonium bisulfate on catalyst’s surface are introduced. Finally, it is proposed that the development of new catalysts is the key research direction for the control of SO3 and ammonium bisulfate formation in coal-fired flue gas.

Key words: sulfur trioxide, nitrogen oxide, selective catalytic reduction catalyst, ammonium hydrogen sulfate

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn