化工进展 ›› 2017, Vol. 36 ›› Issue (06): 2171-2176.DOI: 10.16085/j.issn.1000-6613.2017.06.029

• 工业催化 • 上一篇    下一篇

Pd/CNTs对4-氯苯酚的液相催化加氢去氯

兰丽娟1,2, 刘莺3, 杜芳林1   

  1. 1 青岛科技大学材料科学与工程学院, 山东 青岛 266042;
    2 烟台大学环境与材料工程学院, 山东 烟台 264005;
    3 鲁东大学资源与环境工程学院, 山东 烟台 264025
  • 收稿日期:2016-10-12 修回日期:2017-01-23 出版日期:2017-06-05 发布日期:2017-06-05
  • 通讯作者: 刘莺,杜芳林
  • 作者简介:兰丽娟(1974—),女,博士研究生。
  • 基金资助:
    山东省高等学校优势学科人才团队培育计划“蓝黄两区滨海资源与环境”项目及国家自然科学基金项目(21377162,51272115)。

Liquid-phase catalytic hydrodechlorination of 4-chlorophenol over Pd/CNTs

LAN Lijuan1,2, LIU Ying3, DU Fanglin1   

  1. 1 College of Materials Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042, Shandong, China;
    2 School of Environment and Materials Engineering, Yantai University, Yantai 264005, Shandong, China;
    3 School of Resources and Environmental Engineering, Ludong University, Yantai 264025, Shandong, China
  • Received:2016-10-12 Revised:2017-01-23 Online:2017-06-05 Published:2017-06-05

摘要: 以浓硝酸酸化后的多壁碳纳米管(CNTs)为原料,PdCl2为前体,甲醛为还原剂,采用化学浸渍法制备了5% Pd/CNTs催化剂。通过ICP、XRD、BET、TEM对其进行表征,证实5%的钯纳米粒子成功负载在CNTs管外壁上,钯纳米粒子的平均粒径为4.30nm。在合成Pd/CNTs催化剂的基础上,研究了温和条件下其对4-氯苯酚(4-CP)的液相催化加氢去氯(HDC)规律。考察了体系反应温度、催化剂用量、NaOH用量、反应底物浓度对4-CP降解速率的影响,建立了动力学模型。得到了最佳反应条件:反应温度40℃,催化剂用量20mg,Cl-、OH-摩尔比1∶1.1;Pd/CNTs对4-CP加氢去氯反应为零级反应,反应活化能为Ea=40.12kJ/mol,指前因子A=1.66×107mol/(L·min)。

关键词: 钯/多壁碳纳米管, 催化剂, 4-氯苯酚, 加氢去氯, 反应动力学

Abstract: 5% Pd/CNTs was synthesized by chemical impregnation method using multi-walled carbon nanotubes(CNTs)which was acidified by concentrated nitric acid as starting materials,PdCl2 as precursor and formaldehyde as reducing agent. The catalyst was characterized by means of ICP、XRD、BET and TEM. The results showed that 5% Palladium nanoparticles were successfully loaded on the outer wall of the CNTs tubes and the mean diameter of the Pd nanoparticles was 4.30nm. The performance of the Pd/CNTs catalysts in the liquid-phase catalytic hydrodechlorination(HDC)of 4-chlorphenol(4-CP)under mild conditions was also investigated. Effects of reaction temperature,catalyst and NaOH dosage,substrate concentration,as well as the reaction kinetics were studied. The optimized operating parameters were obtained as reaction temperature 40℃,catalyst dosage 20mg,and Cl-:OH- =1:1.1(molar ratio). The reaction kinetics could be described by a zero-order kinetics model. The activation energy Ea and pre-exponential factor A were estimated as 40.12kJ/mol,and 1.66×107mol/(L·min),respectively.

Key words: Pd/CNTs, catalyst, 4-chlorphenol(4-CP), hydrodechlorination(HDC), reaction kinetic

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn