刮膜式分子蒸馏器传热特性及壁面优化

doi:10.16085/j.issn.1000-6613.2016.09.008

化工进展 ›› 2016, Vol. 35 ›› Issue (09): 2685-2692.DOI: 10.16085/j.issn.1000-6613.2016.09.008

刮膜式分子蒸馏器传热特性及壁面优化

邓立文, 许松林

天津大学化工学院, 天津 300350

收稿日期:2016-01-11 修回日期:2016-04-24 出版日期:2016-09-05 发布日期:2016-09-05
通讯作者: 许松林,副教授,研究方向为制药分离工程、天然产物分离与纯化。E-mail:slxu@tju.edu.cn。
作者简介:邓立文(1989-),女,硕士研究生,研究方向为分离和传热。E-mail:dengliwen091@163.com。
基金资助:
国家自然科学基金项目（21176170）。

Characteristics of heat transfer and wall optimization in the wiped film molecular distiller

DENG Liwen, XU Songlin

School of Chemical Engineering and Technology, Tianjin University, Tianjin 300350, China

Received:2016-01-11 Revised:2016-04-24 Online:2016-09-05 Published:2016-09-05

摘要/Abstract

摘要： 使用CFD软件建立了刮膜式分子蒸馏器的三维模型，以EHP-EHS混合物为研究对象，并通过编写用户自定义函数（UDF），研究刮膜式分子蒸馏过程传质存在时的传热特性，得到充分发展的温度场及流场，分析了蒸发壁面温度的分布及转子转速对其影响和局部Nu数的分布。结果表明：液膜表面的升温过程是周期地和波动地达到动态稳定温度的；转子转速越大，周期越小，温度波动次数越多，温度稳定性越好；局部Nu数在刮膜器刮擦的位置突增，刮膜器的刮擦作用是影响平均Nu数增大的主要因素。经过壁面优化，液体湍流程度增大，传热效果得到不同程度的增强，凸起矩形排列、三角形排列、螺旋形排列时平均Nu数分别是光滑蒸发面的1.32倍、1.23倍、1.04倍，为进一步优化刮膜式分子蒸馏器提供参考。

关键词: 刮膜式分子蒸馏, 计算流体力学, 传热, 壁面优化

Abstract: In this paper,a two phase flow of di-(ethylhexyl)-phthalate and di-(ethylhexyl)-sebacate (EHP-EHS) mixture with a three dimensional model was simulated by CFD software with UDF,by which the heat transfer characteristics of wiped molecular distillation process was studied with full developed temperature and flow field. The results showed that the change of film surface temperature is periodic and waved. With faster rotor speed,the period is shorter,the number of fluctuations is bigger and the film surface temperature is more stable. The Nu number increases sharply where the wiper wipes and the wiped wiper effect is the main factor influencing the increase of average Nu number. With the optimization of the evaporating cylinder,the liquid turbulence increases. The average Nu number of rectangular arrangement,triangular arrangement and the spiral arrangement of fins on the evaporating cylinder are 1.32,1.23 and 1.04 times as large as the smooth one,respectively,which provide a reference for further optimization of wiped film molecular distiller.

Key words: wiped molecular distiller, computational fluid dynamics (CFD), heat transfer, wall structure optimization

中图分类号:

邓立文, 许松林. 刮膜式分子蒸馏器传热特性及壁面优化[J]. 化工进展, 2016, 35(09): 2685-2692.

DENG Liwen, XU Songlin. Characteristics of heat transfer and wall optimization in the wiped film molecular distiller[J]. Chemical Industry and Engineering Progree, 2016, 35(09): 2685-2692.

参考文献

[1] LIN W,WU F W,YUE L,et al. Combination of urea complexation and molecular distillation to purify DHA and EPA from sardine oil ethyl esters[J]. J. Am. Oil. Soc.,2014,91:687-695.
[2] ROCHA E R L,LOPES M S,WOIF-MACIEL M R,et al. Fractionation and characterization of a petroleum residue by molecular distillation process[J]. Industrial & Engineering Chemistry Research,2013,52:15488-15493.
[3] GREENBERG D B. A theoretical and experimental study of the centrifugal molecular still[J]. AIChE J.,1972,18:269-276.
[4] CVERGROS J,POLLAK S,MICOV M,et al. Film wiping in the molecular evaporator[J]. Chemical Engineering Journal,2001,81:9-14.
[5] KAWALA Z,STEPHAN K. Evaporation rate and separation factor of molecular distillation in a falling film apparatus[J]. Chemcal. Eng. Technol.,1989,12:406-413.
[6] LUTISAN J,CVENGROS J,MICOV M. Heat and mass transfer in the evaporating film of a molecular evaporator[J]. Chemical Engineering Journal,2002,85:225-234.
[7] 许松林,郭凯. 刮膜式分子蒸馏装置中的液膜状态实验[J]. 天津大学学报,2010,43(6):544-548.
[8] 李国兵,许春建,周明. DBP-DBS刮膜分子蒸馏过程数值模拟[J]. 天津大学学报,2004,37(3):196-202.
[9] LUTISAN J,CVENGROS J. Mean free path of molecular on molecular distillation[J]. The Chemical Engineering Journal,1995, 56(2):39-50.
[10] 向爱双,许松林. 刮膜式分子蒸馏蒸发液膜模拟中两种湍流模型的比较[J]. 中国科学B辑(化学),2005,35(1):11-16.
[11] KAPLON J,KAWALA Z,SKOCZYLAS A. Evaporation rate of a liquid from the surface of a rotating disc in high vacuum[J]. Chemical Engineering Science,1986,41:519-522.
[12] SHI J,POSADA L R,KAKUDA Y,et al. Molecular distillation of palm oil distillates:evaporation rates, relative volatility, and distribution coefficients of tocotrienols and other minor components[J]. Separation Science and Technology,2007,42:3029-3048.
[13] 陈敏恒,丛德滋,方图南,等. 化工原理[M]. 北京:化学工业出版社,2006:174-182.
[14] 俞佐平. 传热学[M]. 北京:高等教育出版社,1985:164-165.
[15] NAKASO K,MITANI H,FUKAI J. Convection heat transfer in a shell-and-tube heat exchanger using sheet fins for effective utilization of energy[J]. International Journal of Heat and Mass Transfer,2015, 82:581-587.
[16] 黄军,王令,王秋旺,等. 纵向涡发生器传热强化的研究进展[J]. 动力工程,2007,27(2):211-217.
[17] 刘振艳. 凹凸变化壁面降落液膜的流动与传热[D]. 天津:天津科技大学,2008.

刮膜式分子蒸馏器传热特性及壁面优化

Characteristics of heat transfer and wall optimization in the wiped film molecular distiller

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王云飞, 秦蕊, 郑利军, 李焱, 李清平. 旋转填充床CFD模拟研究进展[J]. 化工进展, 2023, 42(S1): 1-9.
[2]	肖辉, 张显均, 兰治科, 王苏豪, 王盛. 液态金属绕流管束流动传热进展[J]. 化工进展, 2023, 42(S1): 10-20.
[3]	赵晨, 苗天泽, 张朝阳, 洪芳军, 汪大海. 负压状态窄缝通道乙二醇水溶液传热特性[J]. 化工进展, 2023, 42(S1): 148-157.
[4]	孙继鹏, 韩靖, 唐杨超, 闫汉博, 张杰瑶, 肖苹, 吴峰. 硫黄湿法成型过程数值模拟与操作参数优化[J]. 化工进展, 2023, 42(S1): 189-196.
[5]	陈林, 徐培渊, 张晓慧, 陈杰, 徐振军, 陈嘉祥, 密晓光, 冯永昌, 梅德清. 液化天然气绕管式换热器壳侧混合工质流动及传热特性[J]. 化工进展, 2023, 42(9): 4496-4503.
[6]	罗成, 范晓勇, 朱永红, 田丰, 崔楼伟, 杜崇鹏, 王飞利, 李冬, 郑化安. 中低温煤焦油加氢反应器不同分配器中液体分布的CFD模拟[J]. 化工进展, 2023, 42(9): 4538-4549.
[7]	卜治丞, 焦波, 林海花, 孙洪源. 脉动热管计算流体力学模型与研究进展[J]. 化工进展, 2023, 42(8): 4167-4181.
[8]	汪健生, 张辉鹏, 刘雪玲, 傅煜郭, 朱剑啸. 多孔介质结构对储层内流动和换热特性的影响[J]. 化工进展, 2023, 42(8): 4212-4220.
[9]	王云刚, 焦健, 邓世丰, 赵钦新, 邵怀爽. 冷凝换热与协同脱硫性能实验分析[J]. 化工进展, 2023, 42(8): 4230-4237.
[10]	郭文杰, 翟玉玲, 陈文哲, 申鑫, 邢明. Al₂O₃-CuO/水混合纳米流体对流传热性能及热经济性分析[J]. 化工进展, 2023, 42(5): 2315-2324.
[11]	刘厚励, 顾中浩, 阳康, 张莉. 3D打印槽道结构槽宽对池沸腾传热特性的影响[J]. 化工进展, 2023, 42(5): 2282-2288.
[12]	张晨宇, 王宁, 徐洪涛, 罗祝清. 纳米颗粒强化传热的多级潜热储热器性能评价[J]. 化工进展, 2023, 42(5): 2332-2342.
[13]	马润梅, 杨海超, 李正大, 李双喜, 赵祥, 章国庆. 表面强化镀层对高速轴承腔密封端面变形及摩擦磨损影响分析[J]. 化工进展, 2023, 42(4): 1688-1697.
[14]	尚玉, 肖满, 崔秋芳, 涂特, 晏水平. CO₂捕集工艺中热再生气余热的PVDF/BN-OH平板复合膜回收特性[J]. 化工进展, 2023, 42(3): 1618-1628.
[15]	邹银才, 李清国, 吴辉, 钟小兵, 陈咸志. 弹载相变热沉传热仿真与优化[J]. 化工进展, 2023, 42(3): 1248-1256.