介质阻挡放电等离子体改性碳基材料研究进展

doi:10.16085/j.issn.1000-6613.2015.07.016

摘要/Abstract

摘要： 介质阻挡放电等离子体因其高效、经济和易操作等优点, 使得其在材料表面改性方面得到了广泛的应用, 同时表现出良好的应用前景。碳基材料由于其许多良好的物化性能, 使得其在很多领域都得到了很好的应用。而经DBD改性后的碳基材料表现出更好的物化性能, 应用更加广泛。主要综述了DBD在改性碳基材料方面的研究现状, 包括活性基团的引入, DBD改性对碳基材料界面结合能、吸附性能、物理结构及其对负载组分分散度的影响。指出改性过程中仍然存在的许多不够完善之处, 提出许多需要进一步深入研究的问题, 如DBD改性对碳基材料物化性能影响的机理研究, 并展望了DBD改性碳基材料技术未来的发展前景。

关键词: 介质阻挡, 等离子体, 碳基材料, 表面改性

Abstract: The dielectric barrier discharge (DBD) non-thermal plasma has shown a good application prospect in material surface modification due to its high efficiency, low-cost and easy operation, etc. Carbon based materials have been widely applied in many fields because of their many excellent physical and chemical properties. Carbon based materials show better physical and chemical properties after modified by DBD plasma. This review mainly summarized the research status of DBD modification of carbon based materials. The impacts of DBD modification on the introduction of active groups, interface binding energy of carbon based materials, adsorption performance, physical structure and dispersion of load components are included. Some defects of DBD modification that need to be improved and further researched are put forward.

Key words: dielectric barrier discharges (DBD), plasma, carbon based materials, surface modification

中图分类号:

刘贵, 宁平, 李凯, 汤立红, 宋辛, 王驰. 介质阻挡放电等离子体改性碳基材料研究进展[J]. 化工进展, 2015, 34(07): 1905-1912.

LIU Gui, NING Ping, LI Kai, TANG Lihong, SONG Xin, WANG Chi. Research progress of dielectric barrier discharge plasma modification of carbon based materials[J]. Chemical Industry and Engineering Progree, 2015, 34(07): 1905-1912.

参考文献

[1] 裴晋昌. 低温等离子体物理化学基础及其应用(一)[J]. 印染, 2005(11):39-42, 50.
[2] Li Kai, Tang Xiaolong, Yi Honghong, et al. Research on manganese oxide catalysts surface pretreated with non-thermal plasma for NO catalytic oxidation capacity enhancement[J]. Applied Surface Science, 2013, 264:557-562.
[3] 涂昕, 满卫东, 游志恒, 等. 微波等离子体化学气相沉积法制备石墨烯的研究进展[J]. 真空与低温, 2014, 20(2):63-70.
[4] 陈杰, 翁扬, 袁细宁, 等. 活性炭吸附协同介质阻挡放电降解甲硫醚[J]. 高校化学工程学报, 2011, 25(3):495-500.
[5] Shao Huaiyu, Wang Yuntao, Xu Hairuo, et al. Hydrogen storage properties of magnesium ultrafine particles prepared by hydrogen plasma-metal reaction[J]. Materials Science and Engineering:B, 2004, 110(2):221-226.
[6] Donnelly Vincent M, Kornblit Avinoam. Plasma etching:Yesterday, today, and tomorrow[J]. Journal of Vacuum Science & Technology A, 2013, 31(5):050825-050848.
[7] Krishnasamy Navaneetha Pandiyaraj, Vengatasamy Selvarajan, Rajendrasing R. Deshmukh, et al. Low pressure DC glow discharge air plasma surface treatment of polyethylene (PE) film for improvement of adhesive properties[J]. Plasma Science and Technology, 2013, 15(1):56-63.
[8] Zhou Quan, Zhao Zongbin, Chen Yongsheng, et al. Low temperature plasma-mediated synthesis of graphene nanosheets for supercapacitor electrodes[J]. Journal of Materials Chemistry, 2012(13):6061-6066.
[9] 李喜, 李杰, 谢宇彤, 等. 大气压介质阻挡放电综述[J]. 高能量密度物理, 2013(2):86-92.
[10] Ulrich Kogelschatz. Dielectric-barrier discharges:Their history, discharge physics, industrial applications[J]. Plasma Chemistry and Plasma Processing, 2003, 23(1):1-46.
[11] Gagnon Hervé, Piyakis Konstantinos, Wertheimer Michael R. Energy dissipation in noble gas atmospheric pressure glow discharges (APGD)[J]. Plasma Processes and Polymers, 2014, 11(2):106-109.
[12] Graham W G, Nersisyan G. Atmospheric pressure glow discharges[J]. American Institute of Physics, 2006, 876(1):250-259.
[13] 刘志强, 贾鹏英, 刘铁. 直流大气压辉光放电高能电子密度的空间分布[J]. 光谱学与光谱分析, 2013, 33(9):2321-2324.
[14] 江南, 我国低温等离子体研究进展(Ⅰ)[J]. 物理, 2006, 35(2):130-138.
[15] 杨岳, 黄碧纯, 叶代启. 低温等离子体对多孔材料的表面改性研究进展[J]. 化工进展, 2008, 27(1l):1760-1763.
[16] 罗凡. 低温等离子体改性碳材料吸附性能的研究[D]. 杭州:浙江大学, 2009.
[17] 王辉, 孙岩洲, 方志, 等. 介质阻挡放电低温等离子体的产生[J]. 印染, 2005(19):5-7.
[18] 黄先亮, 炭素材料的应用现状及发展[J]. 炭素技术, 2013(1):30-35.
[19] 邱毓昌, 张文元, 施围. 高电压工程[M]. 西安:西安交通大学出版社, 1995.
[20] Wang Wenhui, Huang Bichun, Wang Lishan, et al. Oxidative treatment of multi-wall carbon nanotubes with oxygen dielectric barrier discharge plasma[J]. Surface and Coatings Technology, 2011, 205(21-22):4896-4901.
[21] Tang Shoufeng, Lu Na, Li Jie, et al. Design and application of an up-scaled dielectric barrier discharge plasma reactor for regeneration of phenol-saturated granular activated carbon[J]. Separation and Purification Technology, 2012, 95(19):73-79.
[22] Lu Na, Li Jie, Wang Xingxing, et al.Application of double-dielectric barrier discharge plasma for removal of pentachlorophenol from wastewater coupling with activated carbon adsorption and simultaneous regeneration[J]. Plasma Chemistry and Plasma Processing, 2012, 32(1):109-121.
[23] Tang Shoufeng, Lu Na, Li Jie, et al. Removal of bisphenol in water using an integrated granular activated carbon preconcentration and dielectric barrier discharge degradation treatment[J]. Thin Solid Films, 2012, 521:257-260.
[24] Qu Guangzhou, Lu Na, Li Jie, et al. Simulataneous pentachlorophenol decomposition and granular activated carbon regeneration assisted by dielectric barrier discharge plasma[J]. Journal of Hazardous Materials, 2009, 172(1):472-478.
[25] Li J. The research on the interfacial compatibility of polypropylene composite filled with surface treated carbon fiber[J]. Applied Surface Science, 255(20):8682-8684.
[26] Tang Shoufeng, Lu Na, Li Jie, et al. Improved phenol decomposition and simultaneous regeneration of granular activated carbon by the addition of a titanium dioxide catalyst under a dielectric barrier discharge plasma[J]. Carbon, 2013, 53:380-390.
[27] Santos A L, Botelho E, Kostov K G, et al. Atmospheric plasma treatment of carbon fibers for enhancement of their adhesion properties[J]. IEEE Transactions on Plasma Science, 2013, 41(2):319-324.
[28] 解强, 李兰亭, 李静, 等. 活性炭低温氧/氮等离子体表面改性的研究[J]. 中国矿业大学学报, 2005, 34(6):688-693.
[29] Huang Huacun, Ye Daiqi, Huang Bichun. Vanadium supported on viscose-based activated carbon fibers modified by oxygen plasma for the SCR of NO[J]. Catalysis Today, 2008, 139:100-108.
[30] Hueso J L, Espinós J P, Caballero A, et al. XPS investigation of the reaction of carbon with NO, O₂, N₂ and H₂O plasmas[J]. Carbon, 2007, 45(1):89-96.
[31] Ju Young Yook, Jaeho Jun, Soonjong Kwak. Amino functionalization of carbon nanotube surfaces with NH₃ plasma treatment[J]. Applied Surface Science, 2010, 256:6942-6944.
[32] Chen Changlun, Liang Bo, Lu Di, et al. Amino group introduction onto multiwall carbon nanotubes by NH₃/Ar plasma treatment[J]. Carbon, 2010, 48:939-948.
[33] Inagaki N, Narushima K, Hashimoto H, et al. Implantation of amino functionality into amorphous carbon sheet surfaces by NH₃ plasma[J]. Carbon, 2007, 45:797-804.
[34] Lu Haisheng, Knut Gottfried, Nicole Ahner, et al. Investigation of CH₄, NH₃, H₂ and He plasma treatment on porous low-k films and its effects on resisting moisture absorption and ions penetration[J]. Microelectronic Engineering, 2013, 106:85-90.
[35] Wei Yan, Yang Ran, Chen Xing, et al. A cation trap for anodic stripping voltammetry:NH₃-plasma treated carbon nanotubes for adsorption and detection of metal ions[J]. Analytica Chimica Acta, 2012, 755:54-61.
[36] Kodama Satoshi, Sekiguchi Hidetoshi. Estimation of point of zero charge for activated carbon treated with atmospheric pressure non-thermal oxygen plasmas[J]. Thin Solid Films, 2006, 506-507, 327-330.
[37] Kodama Satoshi, Habaki Hiroaki, Hidetoshi Sekiguchi, et al. Surface modification of adsorbents by dielectric barrier discharge[J]. Thin Solid Films, 2002, 407:151-155.
[38] Li Hao, Liang Hui, He Fang, et al. Air dielectric barrier discharges plasma surface treatment of three-dimensional braided carbon fiber reinforced epoxy composites[J]. Surface and Coatings Technology, 2009, 203(10-11):1317-1321.
[39] da Silva L L Goncalves, Ferreira L G, Lima Santo S A, et al. Treatment of reticulated vitreous carbon by dielectric barrier discharge plasma for electrodes production[J]. Plasma Science, IEEE Transact, 2013, 41(12):3207-3213.
[40] Yi Honghong, Zhao Shunzheng, Tang Xiaolong, et al. Low-temperature hydrolysis of carbon disulfide using the Fe-Cu/AC catalyst modified by non-thermal plasma[J]. Fuel, 2014, 128:268-273.
[41] Saxena S, Ray AU, Kapil A, et al. Development of a new polypropylene-based suture:Plasma grafting, surface treatment, characterization, and biocompatibility studies[J]. Macromolecular Bioscience, 2011, 11(3):373-82.
[42] 郭建君, 孙晋良, 任慕苏, 等. 冷等离子处理对碳纤维表面及复合材料性能的影响[J]. 高分子材料科学与工程, 2010, 26(4):85-88.
[43] Luo Honglin, Xiong Guangyao, Ren Kaijing, et al. Air DBD plasma treatment on three-dimensional braided carbon fiber-reinforced PEEK composites for enhancement of in vitro bioactivity[J]. Surface and Coatings Technology, 2014, 242:1-7.
[44] Huang Huacun, Ye Daiqi, Huang Bichun, et al. Vanadium supported on viscose-based activated carbon fibers modified by oxygen plasma for the SCR of NO[J]. Catalysis Today, 2008, 139(1-2):100-108.
[45] Kusano Y, Mortensen H, Stenum B, et al. Atmospheric pressure plasma treatment of glassy carbon for adhesion improvement[J]. International Journal of Adhesion and Adhesives, 2007, 27(5):402-408.
[46] 汪星星, 李杰, 鲁娜, 等. 双介质阻挡放电法再生吸附五氯酚的活性炭[J]. 化工环保, 2011(2):97-100.
[47] Lu Na, Li Jie, Wang Xingxing, et al. Application of double-dielectric barrier discharge plasma for removal of pentachlorophenol from wastewater coupling with activated carbon adsorption and simultaneous regeneration[J]. Plasma Chemistry and Plasma Processing, 2012, 32(1):109-121.
[48] Hadavifar Mojtaba, Bahramifar Nader, Younesi Habibollah, et al. Adsorption of mercury ions from synthetic and real wastewater aqueous solution by functionalized multi-walled carbon nanotube with both amino and thiolated groups[J]. Chemical Engineering Journal, 2014, 237:217-228.
[49] Qu Guangzhou, Lu Na, Li Jie, et al. Decomposition of pentachlorophenol using combination of densification by granular activated carbon adsorption and dielectric barrier discharge[J]. Journal of Hazardous Materials, 2009, 172(1):472-478.
[50] Lee Dong Soo, Hong-Sang Hee, Paek Kwang-Hyun, et al. Adsorbability enhancement of activated carbon by dielectric barrier discharge plasma treatment[J]. Surface and Coatings Technology, 2005, 200(7):2277-2282.
[51] Wu Guangqian, Zhang Xin, Hui Hui, et al. Adsorptive removal of aniline from aqueous solution by oxygen plasma irradiated bamboo based activated carbon[J]. Chemical Engineering Journal, 2012, 185-186:201-210.
[52] Che Yao, Zhou Jiayong, Wang Zuwu. Plasma modification of activated carbon fibers for adsorption of SO₂[J]. Plasma Science and Technology, 2013, 15(10):1047-1052.
[53] Qu Guangzhou, Li Jie, Liang Dongli, et al. Surface modification of a granular activated carbon by dielectric barrier discharge plasma and its effects on pentachlorophenol adsorption[J]. Journal of Electrostatics, 2013, 71(4):689-694.
[54] Tang Shen, Lu Na, Wang Jiku, et al. Novel effects of surface modification on activated carbon fibers using a low pressure plasma treatment[J]. American Chemical Society, 2007, 111(4):1820-1829.
[55] Qu Guangzhou, Li Jie, Wu Yan, et al. Regeneration of acid orange 7-exhausted granular activated carbon with dielectric barrier discharge plasma[J]. Chemical Engineering Journal, 2009, 146(2):168-173.
[56] Ji Puhui, Qu Guangzhou, Li Jie. Effects of dielectric barrier discharge plasma treatment on pentachlorophenol rem oval of granular activated carbon[J]. Plasma Science and Technology, 2013, 15(10):1059-1065.
[57] Park Soo-Jin, Kim Byung-Joo. Influence of oxygen plasma treatment on hydrogen chloride removal of activated carbon fibers[J]. Colloid and Interface Science, 2004, 275:590-595.