Chemical Industry and Engineering Progree ›› 2015, Vol. 34 ›› Issue (08): 3142-3146.DOI: 10.16085/j.issn.1000-6613.2015.08.038

Previous Articles     Next Articles

Evaluation of combination, application and nitrogen removal efficiency of partial nitritation-anammox process

CUI Jianhong1,2, LI Xiang1,2, HUANG Yong1,2   

  1. 1 School of Environment Science and Engineering, Suzhou University of Science and Technology, Suzhou 215009, Jiangsu, China;
    2 Insitute of Environmental Biotechnology, Suzhou University of Science and Technology, Suzhou 215009, Jiangsu, China
  • Received:2014-12-19 Revised:2014-12-27 Online:2015-08-05 Published:2015-08-05

部分亚硝化-厌氧氨氧化工艺联合形式、应用及脱氮效能评析

崔剑虹1,2, 李祥1,2, 黄勇1,2   

  1. 1 苏州科技学院环境科学与工程学院, 江苏 苏州 215009;
    2 苏州科技学院环境生物技术研究所, 江苏 苏州 215009
  • 通讯作者: 黄勇,教授,博士生导师。E-mail yhuang@mail.usts.edu.cn。
  • 作者简介:崔剑虹(1990—),男,硕士研究生,主要研究方向为废水脱氮处理理论及工艺。E-mail cuijianhonghuan@126.com。
  • 基金资助:
    国家自然科学基金(51008202)、江苏省环境保护厅重大项目(201104)及苏州科技学院研究生创新基金项目(skcx14/028)。

Abstract: This study introduced the combination, characteristics and research progress of partial nitritation-anammox. Partial nitritation-anammox process and traditional biological denitrification process were compared in nitrogen removal rate, energy consumption and carbon source. Although partial nitritation-anammox process doesn't require organic carbon, its energy consumption is higher than traditional biological denitrification process due to heating and aeration. The difference between nitrogen removal rate of partial nitritation-anammox and traditional biological denitrification process is not significant. Carbon to nitrogen ratio of wastewater needs to be considered when choosing denitrification process. Traditional biological denitrification process is more suitable for high carbon to nitrogen ratio, and combined process is more suitable for low carbon to nitrogen ratio.

Key words: environment, waste water, partial nitritation-anammox, anaerobic, nitrogen removal rate

摘要: 部分亚硝化-厌氧氨氧化联合工艺与传统生物脱氮工艺相比具有一定优势,但该联合工艺是否一定优于传统生物脱氮工艺尚需论证。本文介绍了部分亚硝化-厌氧氨氧化联合工艺的组合形式、特点和处理实际废水的研究进展,从脱氮速率、能耗及碳源的角度将部分亚硝化-厌氧氨氧化联合工艺与传统生物脱氮工艺进行对比分析。指出部分亚硝化-厌氧氨氧化联合工艺具有不需要额外投加有机碳源的优点;部分亚硝化-厌氧氨氧化联合工艺虽然在曝气方面可以节省能耗,但是其中温反应需要一定的热能消耗,综合分析其处理能耗高于传统生物脱氮工艺;同时该联合工艺的整体脱氮速率与传统生物脱氮工艺相比差别不大。据此提出在选择生物脱氮工艺时需要考虑废水的碳氮比,碳氮比高时可以采用传统生物脱氮工艺,碳氮比低时可以考虑使用部分亚硝化-厌氧氨氧化联合工艺。

关键词: 环境, 废水, 部分亚硝化-厌氧氨氧化联合工艺, 厌氧, 脱氮速率

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd