Lithium storage performance of Fe-doped Xuan paper-based carbon fiber materials

doi:10.16085/j.issn.1000-6613.2021-0146

Abstract

Abstract:

In order to improve the high cost and environmental pollution of current lithium-ion battery electrode materials, a method of directly sintering and carbonizing Xuan paper made of plant fibers and modification of it as a lithium-ion battery anode electrode material was proposed. By changing the sintering temperature and time, the optimal carbonization mechanism of Xuan paper was explored, and then the Xuan paper-based carbon fiber materials were modified by doping Fe in a simple solution method and sintering method. The prepared materials were characterized and compared by X-ray diffraction spectroscopy (XRD), scanning electron microscopy (SEM) and X-ray energy spectroscopy (EDS). The results showed that Fe was successfully incorporated into the raw materials of Xuan paper. The material had strong flexibility and can be used directly as an electrode. The structure was uniform and stable, and the upper surface of the microstructure had many uniform micropores than before. The lithium storage performance of the prepared Xuan paper material as the anode electrode of the lithium ion battery was analyzed by the constant current charge and discharge method. The results showed that the first cycle specific capacity of the lithium-ion battery can reach 565.4mA·h/g at a current density of 500mA/g, and can still maintain a high capacity of 124.7mA·h/g when current density up to 2500mA/g. Besides, a stable and long lifespan of 1000 cycles at a current density of 1000mA/g can be also obtained.

Key words: Xuan paper, Fe-doped, Li-ion battery, anode material, long cycle life

摘要：

为了改善目前锂离子电池电极材料的成本高、环境污染等问题，本文提出了一种由植物纤维构成的宣纸直接烧结炭化并对其进行改性之后作为锂离子电池负极材料的方法。通过改变烧结温度和时间，探究宣纸的最佳炭化机制，之后通过简单的溶液法和烧结法掺杂入Fe对宣纸基碳纤维材料进行改性。并通过X射线衍射光谱（XRD）、扫描电镜（SEM）和X射线能谱分析（EDS）等分析手段对制备的材料进行了表征和对比，结果表明Fe成功均匀掺入到宣纸的原材料中。材料有很强的柔性可直接作为电极使用，结构均匀且稳定，并且在微观结构上，表面较之前呈现出了很多均匀的微孔。通过恒流充放电法分析了所制备宣纸材料作为锂离子电池负极的储锂性能。结果表明，在500mA/g电流密度下锂离子电池容量首圈可达到565.4mA·h/g，当电流密度高达2500mA/g时可逆容量仍然能够保持在124.7mA·h/g；在1000mA/g电流密度下可以保持稳定的长循环至1000圈。

关键词: 宣纸, Fe掺杂, 锂离子电池, 负极材料, 长循环寿命

CLC Number:

TQ152

HU Sisi, SUN Lizhi, ZHANG Di, WANG Bo. Lithium storage performance of Fe-doped Xuan paper-based carbon fiber materials[J]. Chemical Industry and Engineering Progress, 2021, 40(10): 5370-5377.

胡思思, 孙丽芝, 张迪, 王波. Fe掺杂宣纸基碳纤维材料的储锂性能[J]. 化工进展, 2021, 40(10): 5370-5377.

Figures/Tables 8

References 22

1	王特, 蒋立, 田晓录, 等. 锂离子电池安全材料的研究进展[J]. 化工进展. 2021, 40(6): 3132-3142.
	WANG Te, JIANG Li, TIAN Xiaolu, et al. Research progress of lithium ion batteries safety materials[J]. Chemical Industry and Engineering Progress. 2021, 40(6): 3132-3142.
2	蓝兹炜, 张建茹, 李园园, 等. 基于锂离子电池正极材料的一元/二元复合正极材料研究进展[J]. 储能科学与技术, 2021, 10(1): 27-39.
	LAN Ziwei, ZHANG Jianru, LI Yuanyuan, et al. Research progress of mono/binary composite cathode materials based on lithium-ion battery cathode materials[J]. Energy Storage Science and Technology, 2021, 10(1): 27-39.
3	秦凯, 郑钧元, 杨良君. 锂离子电池电解液功能添加剂研究进展[J]. 冶金与材料, 2020, 40(4): 7-8.
	QIN Kai, ZHENG Junyuan, YANG Liangjun. Research progress of functional additives for lithium-ion battery electrolyte[J]. Metallurgy and Materials, 2020, 40(4): 7-8.
4	吕成学. 锂离子电池负极材料SnFe合金的研究[J]. 材料导报, 2006, 20(S1): 300-302.
	Chengxue LYU. Research on SnFe alloy as anode material for the lithium-ion battery[J]. Materials Review, 2006, 20(S1): 300-302.
5	ZHANG Wenhan, AI Jinjin, LEI Yike, et al. Li₄Ti₅O₁₂-TiO₂/C hollow microspheres derived from nanoporous biomass carbon as anode materials for lithium ion batteries[J]. Solid State Ionics, 2020, 344: 115132.
6	李俊岭, 李涛, 李伟伟, 等. TiO₂基锂离子电池复合负极材料的研究进展[J]. 化工进展, 2017, 36(5): 1755-1762.
	LI Junling, LI Tao, LI Weiwei, et al. Recent progress on TiO₂-based composites for Li-ion battery anodes[J]. Chemical Industry and Engineering Progress, 2017, 36(5): 1755-1762.
7	陶璋, 伍玲梅, 张亚飞, 等. 生物质多孔碳基复合相变材料制备及性能[J]. 工程科学学报, 2020, 42(1): 113-119.
	TAO Zhang, WU Lingmei, ZHANG Yafei, et al. Preparation and properties of biomass porous carbon-based composite phase change materials[J]. Chinese Journal of Engineering Science, 2020, 42(1): 113-119.
8	李义, 李纯, 于开锋. 玉米秸秆基多孔生物质碳的制备、表征及电化学性能[J]. 高等学校化学学报, 2018, 39(4): 607-613.
	LI Yi, LI Chun, YU Kaifeng. Preparation, characterization and electrochemical properties of mesoporous biomass carbon derived from corn stalk[J]. Chemical Journal of Chinese Universities, 2018, 39(4): 607-613.
9	祁佩荣, 代斌. 香蕉皮基多孔炭泡沫的制备及其电化学性能[J]. 石河子大学学报(自然科学版), 2019, 37(4): 397-404.
	QI Peirong, DAI Bin. Preparation and electrochemical properties of banana peel-based multi-porous carbon foam[J]. Journal of Shihezi University (Natural Science), 2019, 37(4): 397-404.
10	CAO Wei, ZHANG Erjin, WANG Jue, et al. Potato derived biomass porous carbon as anode for potassium ion batteries[J]. Electrochimica Acta, 2019, 293: 364-370.
11	李德念, 陈会兵, 阳济章, 等. 生物质焦油衍生氮掺杂多孔碳负载Co₃O₄纳米晶的制备及双功能氧反应催化[J]. 化工进展, 2020, 39(11): 4446-4455.
	LI Denian, CHEN Huibing, YANG Jizhang, et al. Biomass tar-derived carbon doped with nitrogen to load Co₃O₄ nanocrystals as efficient bifunctional catalyst for oxygen reduction and evolution[J]. Chemical Industry and Engineering Progress, 2020, 39(11): 4446-4455.
12	刘鑫鑫, 马洪芳, 王晓丹, 等. 生物质衍生多孔碳材料的制备及电化学应用[J]. 齐鲁工业大学学报, 2018, 32(4): 26-32.
	LIU Xinxin, MA Hongfang, WANG Xiaodan, et al. Preparation and electrochemical application of porous carbon materials derived from biomass[J]. Journal of Qilu University of Technology, 2018, 32(4): 26-32.
13	ZHANG L C, SUN X, HU Z, et al. Rice paper as a separator membrane in lithium-ion batteries[J]. Journal of Power Sources, 2012, 204: 149-154.
14	BASIRON N, SREEKANTAN S, AKIL H M, et al. Effect of Li-TiO₂ nanoparticles incorporation in LDPE polymer nanocomposites for biocidal activity[J]. Nano-Structures & Nano-Objects, 2019, 19: 100359.
15	BAGHERI A, ARGHAVANI J, NAGHDABADI R, et al. A theory for coupled lithium insertion and viscoplastic flow in amorphous anode materials for Li-ion batteries[J]. Mechanics of Materials, 2021, 152: 1003663.
16	WANG B, YUAN F, LI W, et al. Rational formation of solid electrolyte interface for high-rate potassium ion batteries[J]. Nano Energy, 2020, 75: 104979.
17	Yinyun LYU, WANG Yiting, LI Hongli, et al. MOF-derived porous Co/C nanocomposites with excellent electromagnetic wave absorption properties[J]. ACS Applied Materials & Interfaces, 2015, 7(24): 13604-13611.
18	郑时有, 董飞, 庞越鹏, 等. 纳米金属氧化物基锂离子电池负极材料研究进展[J]. 无机材料学报, 2020, 35(12): 1295-1306.
	ZHENG Shiyou, DONG Fei, PANG Yuepeng, et al. Research progress on nanostructured metal oxides as anode materials for Li-ion battery[J]. Journal of Inorganic Materials, 2020, 35(12): 1295-1306.
19	LIU Jinlong, JIANG Jianbo, QIAN Dong, et al. Facile assembly of a 3D rGO/MWCNTs/Fe₂O₃ ternary composite as the anode material for high-performance lithium ion batteries[J]. RSC Advances, 2013, 3(35): 15457.
20	ZHU Xianjun, ZHU Yanwu, MURALI Shanthi, et al. Nanostructured reduced graphene oxide/Fe₂O₃ composite as a high-performance anode material for lithium ion batteries[J]. ACS Nano, 2011, 5(4): 3333-3338.
21	DU Rui. Preparation of activated carbons from sisal fibers as anode materials for lithium ion batteries[J]. International Journal of Electrochemical Science, 2016, 11(10): 8418-8429.
22	叶耀坤, 胡宗祥, 刘佳华, 等. 锂离子电池正极材料中的极化子现象理论计算研究进展[J]. 物理化学学报, 2021, 37(11): 2021003.
	YE Yaokun, HU Zongxiang, LIU Jiahua, et al. Progress in theoretical calculations of polaron phenomenon in lithium-ion battery cathode materials[J]. Acta Physico-Chimica Sinica, 2021, 37(11): 2021003.

[1]	LU Nan, WANG Haimin, WANG Chuanwei, HU Xuebin, ZHOU Jiangang, LIU Wenqin, ZHAO Feng, MENG Guodong. Thermal characteristics and improved discharge parameters of NCM811 traction battery immersed preheated by insulating oil [J]. Chemical Industry and Engineering Progress, 2023, 42(3): 1299-1307.
[2]	CHEN Xue, LIU Shulin, HE Fengxiang, LYU Han, WU Quanyu, WANG Hao, QU Bin. Preparation and performance of anode material modifiers based on coal series heavy aromatic hydrocarbons [J]. Chemical Industry and Engineering Progress, 2022, 41(12): 6461-6468.
[3]	QIU Zhiwen, WU Aimin, WANG Jie, HUANG Hao. Research progress of Si-based anode materials for Li-ion battery [J]. Chemical Industry and Engineering Progress, 2021, 40(S1): 253-269.
[4]	YU Minghao, GU Mengxuan, WU Zhengying, SUN Linbing. Advances in the synthesis and application of manganese oxides as anode materials for lithium-ion batteries [J]. Chemical Industry and Engineering Progress, 2021, 40(9): 5012-5028.
[5]	Zhenshuai WANG, Baolin XING, Xuefeng HAN, Huihui ZENG, Lei HOU, Hui GUO, Chuanxiang ZHANG, Zhihang YUE. Preparation of coal tar pitch-based microcrystal carbons and their lithium storage properties [J]. Chemical Industry and Engineering Progress, 2021, 40(1): 313-323.
[6]	Runhong WEI, Ruhui XU, Xuejun HU, Keyu ZHANG, Yenan ZHANG, Feng LIANG, Yaochun YAO. Dimensional design of SnO₂-C composite anode material for lithium and sodium ion batteries [J]. Chemical Industry and Engineering Progress, 2020, 39(7): 2677-2686.
[7]	Lihui ZHANG, Yuxing XU, Zhenfa LIU, Aijia WEI, Wen LI. Synthesis and electrochemical properties of Li₄Ti₅O₁₂/graphene composite as an anode material for Li-ion batteries [J]. Chemical Industry and Engineering Progress, 2019, 38(02): 949-955.
[8]	CHEN Yongzhen, LI Hualing, SONG Wenji, FENG Ziping. Solid phase regeneration of spent LiFePO₄ cathode materials by carbothermal reduction method [J]. Chemical Industry and Engineering Progress, 2018, 37(S1): 133-140.
[9]	YANG Chuxiong, YANG Chengzhao, LÜ Youfu. Analysis of the uniformity impact of Li-ion battery module for new energy vehicles [J]. Chemical Industry and Engineering Progress, 2018, 37(S1): 75-79.
[10]	MA Yan, LIN Zhen, JIA Qiurong, GAO Zhijie. Preparation and electrochemical performance of self-supporting Si/graphene films [J]. Chemical Industry and Engineering Progress, 2018, 37(10): 3974-3979.
[11]	ZHANG Ding, YAN Yongwang, SHI Wenjing, ZHAO Xiaomin, LIU Shibin, WANG Xiaomin. Research progress of potassium-ion batteries [J]. Chemical Industry and Engineering Progress, 2018, 37(10): 3772-3780.
[12]	ZHANG Yingjie, ZHU Ziyi, DONG Peng, ZHAO Shaobo, ZHANG Yanjia, YANG Chengyun, YANG Chengfeng, WEI Keyi, LI Xue. Research progress of carbon-based anode materials for sodium ion batteries [J]. Chemical Industry and Engineering Progress, 2017, 36(11): 4106-4115.
[13]	LI Junling, LI Tao, LI Weiwei, REN Baozeng. Recent progress on TiO₂-based composites for Li-ion battery anodes [J]. Chemical Industry and Engineering Progress, 2017, 36(05): 1755-1762.
[14]	ZHOU Dan, LIANG Feng, YAO Yaochun. Research progress of negative film-forming additives in electrolyte for Li-ion batteries [J]. Chemical Industry and Engineering Progree, 2016, 35(05): 1477-1483.
[15]	WANG Xianning, LING Feng, PAN Wei, LIU Huijing. Chinese patent analysis on anode materials for lithium-ion battery [J]. Chemical Industry and Engineering Progree, 2016, 35(01): 336-339.