Chemical Industry and Engineering Progress ›› 2020, Vol. 39 ›› Issue (7): 2677-2686.DOI: 10.16085/j.issn.1000-6613.2019-1536

• Materials science and technology • Previous Articles     Next Articles

Dimensional design of SnO2-C composite anode material for lithium and sodium ion batteries

Runhong WEI1(), Ruhui XU1, Xuejun HU2, Keyu ZHANG1, Yenan ZHANG1, Feng LIANG1, Yaochun YAO1()   

  1. 1.The National Engineering Laboratory for Vacuum Metallurgy, Kunming University of Science and Technology, Kunming 650093, Yunnan, China
    2.Kunming Nonferrous Metallurgy Design and Research Institute, Kunming 650051, Yunnan, China
  • Online:2020-07-10 Published:2020-07-05
  • Contact: Yaochun YAO

SnO2-C复合负极材料的维度设计用于锂、钠离子电池

魏润宏1(), 徐汝辉1, 胡学军2, 张克宇1, 张业男1, 梁风1, 姚耀春1()   

  1. 1.昆明理工大学真空冶金国家工程实验室,云南 昆明 650093
    2.昆明有色冶金设计研究院股份公司,云南 昆明 6500513 省部共建复杂有色金属资源清洁利用国家重点实验室,云南 昆明 650093
  • 通讯作者: 姚耀春
  • 作者简介:魏润宏(1993—),男,硕士研究生,研究方向为锂离子电池高容量负极材料。E-mail:1109834328@qq.com
  • 基金资助:
    国家自然科学基金(51364021);云南省自然科学基金(2014FA025);昆明理工大学分析测试基金(2019M20182202071)

Abstract:

With the rapid development of new energy vehicles, more and more attention is paid to battery materials with high energy density. Due to the advantages of high specific capacity, good rate performance, abundant resources, and low price, SnO2-C composites are regarded as one of the most promising anode materials for next-generation lithium and sodium ion batteries. Based on the dimensional changes and dimensional compounding methods of SnO2-C composites, we firstly classifies different SnO2-C composites and then summarizes the latest representative progress of them in detail. The focus is placed on the dimensional design formulas and the resulting synergistic effect that could potentially improve the performance. In view of the excellent results from the synergistic effect, future research could focus upon multiple composite. At the same time, simple, environmental-friendly and cheap synthetic processes should be explored. The concept and strategy presented in this work could provide some basis for the practical rational design and scalable construction of the metal oxide-C composites of lithium ion and sodium ion batteries.

Key words: SnO2-C composite anode material, lithium ion battery, sodium ion battery, dimensional design, activated carbon, electrochemistry

摘要:

新能源汽车的高速发展,对电池材料的能量密度提出了更高的要求。SnO2-C复合材料因比容量高、倍率性能好、资源丰富、价格低廉等优点而被视为下一代锂、钠离子电池最有潜力的负极材料之一。基于SnO2-C复合材料的尺寸变化和尺寸复合方式,本文对SnO2-C复合材料进行了分类,并且详细综述了SnO2-C复合材料的最新代表性进展,重点涉及尺寸设计公式以及由此产生的协同效应和提高性能的潜力。最后,讨论了该领域未来的发展方向和前景,鉴于协同效应的优良体现,以后该研究将偏于多重复合方向,同时会探索出简单、环保、廉价的合成工艺,不断向商品化的方向靠近。其概念和策略对实际锂离子、钠离子电池金属氧化物-C复合材料的合理设计和可扩展构造提供了一些依据。

关键词: SnO2-C复合负极材料, 锂离子电池, 钠离子电池, 维度设计, 活性碳, 电化学

CLC Number: 

京ICP备12046843号-2;京公网安备 11010102001994号
Copyright © Chemical Industry and Engineering Progress, All Rights Reserved.
E-mail: hgjz@cip.com.cn
Powered by Beijing Magtech Co. Ltd