化工进展 ›› 2020, Vol. 39 ›› Issue (11): 4384-4390.DOI: 10.16085/j.issn.1000-6613.2020-0214

• 化工过程与装备 • 上一篇    下一篇

基于最小维修的石化安全设备区间截尾寿命数据分析

屈持1(), 王海清1(), 刘建利2, 姚竣瀚1   

  1. 1.中国石油大学(华东)机电工程学院,安全科学与工程系,山东 青岛 266580
    2.北京多美尼特自控工程技术有限公司,北京 100027
  • 出版日期:2020-11-05 发布日期:2020-11-06
  • 通讯作者: 王海清
  • 作者简介:屈持(1996—),男,硕士研究生,研究方向为石化装置安全设备的RM数据分析。E-mail:qucupc@163.com
  • 基金资助:
    国家重点研发计划(2019YFB2006305);山东省自然科学基金(ZR20170MEE008)

Interval censored life data of petrochemical safety equipment based on minimal maintenance

Chi QU1(), Haiqing WANG1(), Jianli LIU2, Junhan YAO1   

  1. 1.Department of Safety Science and Engineering, College of Electrical and Mechanical Engineering, China University of Petroleum (East China), Qingdao 266580, Shandong, China
    2.Beijing Dominate Automation Engineering Co. , Ltd. , Beijing 100027, China
  • Online:2020-11-05 Published:2020-11-06
  • Contact: Haiqing WANG

摘要:

在石化安全关键设备寿命截尾数据的可靠性评估过程中,为避免传统可靠性评估方法未考虑维修对故障间隔时间的影响,以及中值填充法误差较大的缺点,本文提出了一种逆变换区间截尾数据填充方法。首先,在可修系统基于最小维修的假设下,通过非齐次泊松过程描述系统的故障趋势,利用逆变换填充得到监测区间的缺失数据;随后根据蒙特卡罗期望最大化算法,获得填充数据的参数估计值。通过蜡油加氢装置紧急泄压阀的案例分析,该算法能够很好地融合已有数据,得到的形状参数估计值偏差与中值填充法相比缩小4%以上,从而验证了该算法的有效性;这有助于安全关键设备的定量化完整性管理,保障石化装置平稳运行。

关键词: 石化设备, 安全, 数值分析, 蒙特卡罗模拟, 参数估计

Abstract:

For the censored life data of critical petrochemical safety equipment, the traditional reliability assessment methods do not consider the effect of maintenance on time between failures. In order to avoid this shortcoming and the large error of median padding algorithm, an inverse transform interval censored data filling algorithm was proposed. Firstly, based on the assumption that the repairable system was in the minimal maintenance, the non-homogeneous Poisson process to describe the system’s failure trend was used, and the missing data of the monitoring interval using the inverse transformation filling intensity function were obtained. Then, according to the Monte Carlo expectation maximization algorithm, the parameter estimates of the filled data were obtained. The case analysis of the emergency pressure relief valve of the wax oil hydrogenation device showed that the algorithm can well integrate the existing data. Comparing with the median padding algorithm, this calculated deviation of the shape parameter estimates was reduced more than 4%, which proved the effectiveness of this algorithm. It helped the quantitative integrity management of the critical safety equipment and guaranteed the smooth operation of the petrochemical equipment.

Key words: petrochemical equipment, safety, numerical analysis, Monte Carlo simulation, parameter estimation

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn