废弃钒钛系选择性催化还原催化剂重金属浸出特性

doi:10.16085/j.issn.1000-6613.2017-2269

化工进展 ›› 2018, Vol. 37 ›› Issue (10): 3873-3878.DOI: 10.16085/j.issn.1000-6613.2017-2269

废弃钒钛系选择性催化还原催化剂重金属浸出特性

戴泽军¹, 王乐乐^1,2, 唐浩¹, 苏胜¹, 杨涛¹, 刘威¹, 许凯¹, 汪一¹, 胡松¹, 向军¹

1 华中科技大学煤燃烧国家重点实验室, 湖北武汉 430074;
2 西安热工研究院有限公司苏州分公司, 江苏苏州 215153

收稿日期:2017-11-03 修回日期:2017-11-25 出版日期:2018-10-05 发布日期:2018-10-05
通讯作者: 向军,教授,研究方向为燃烧理论及污染物生成与控制。
作者简介:戴泽军(1992-),男,硕士研究生,研究方向为固体废弃物处理及资源化利用。
基金资助:
国家自然科学基金（51576086，51576081）及深圳市科技创新项目（JCYJ20170307172446325）。

Leaching characteristics of the heavy metals in spent vanadium and titanium SCR catalyst

DAI Zejun¹, WANG Lele^1,2, TANG Hao¹, SU Sheng¹, YANG Tao¹, LIU Wei¹, XU Kai¹, WANG Yi¹, HU Song¹, XIANG Jun¹

1 State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, Hubei, China;
2 Xi'an Thermal Power Research Institution Co., Ltd. (Suzhou Branch), Suzhou 215153, Jiangsu, China

Received:2017-11-03 Revised:2017-11-25 Online:2018-10-05 Published:2018-10-05

摘要/Abstract

摘要： 为探讨废弃选择性催化还原（SCR）催钒钛系催化剂中重金属的浸出毒性及其浸出特性，收集了山东某电厂的废弃SCR催化剂进行实验。采用固体废弃物毒性浸出方法硫酸/硝酸法（HJ/T299-2007）进行废弃SCR催化剂毒性浸出实验，同时开展了不同溶液pH、不同浸出时间和不同液固比（L/S）下废弃SCR催化剂中重金属浸出特性的实验研究。结果表明：废弃钒钛系SCR催化剂有一定的重金属浸出毒性，其中V和Zn的浸出浓度偏高，分别为13.8mg/L和2.1mg/L；pH对重金属的浸出影响显著，强酸对Cr、Ni、Cu和Zn的浸出有促进作用，V在强酸强碱环境下（pH<3或pH>11）容易释放；V、Cr、Ni和Cu主要在浸出过程的前2h内释放，18h时释放率都已高达96%以上，18h后这4种重金属浸出基本完成，而Zn在浸出18h后仍有6%释放，浸出周期相对较长；室温下加大液固比对废弃催化剂中V的浸出仅起稀释作用；Cr、Ni、Cu和Zn的溶出在液固比（L/S）<30时受溶解度的影响，L/S>30时被稀释。

关键词: 选择催化还原, 催化剂, 废物处理, 重金属, 浸取, 毒性

Abstract: To study leaching toxicity and leaching characteristics of the heavy metals in spent SCR catalysts, we collected spent SCR catalysts from a certain power plant in Shandong. The leaching toxicity experiment for spent SCR catalyst was carried out by using the sulfuric acid/nitric acid method (HJ/T299-2007), and the leaching characteristics of heavy metals in spent SCR catalyst were studied at different pH, different leaching time and different liquid-solid ratios. The results show that the spent SCR catalysts have certain leaching toxicity, and the leaching concentration of V and Zn are high, which are 13.8mg/L and 2.1mg/L, respectively. pH has a great effect on the leaching of heavy metals. The leaching of Cr, Ni, Cu and Zn is promoted by strong acid, and V is easy to release under strong acid and alkali environment(pH<3 or pH>11). V, Cr, Ni and Cu were mainly released within 2h. Their release rates were higher than 96% at 18h, and the leaching of the four heavy metals were nearly completed after 18h. 6% of the Zn was still released after 18h, and the leaching cycle is relatively long. At room temperature, increasing the liquid-solid ratio only exerts a dilution effect on the leaching of V, while the dissolution of Cr, Ni, Cu and Zn are limited by the solubility at L/S<30, and they will be diluted when L/S>30.

Key words: selective catalytic reduction, catalyst, waste treatment, heavy metals, leaching, toxicity

中图分类号:

戴泽军, 王乐乐, 唐浩, 苏胜, 杨涛, 刘威, 许凯, 汪一, 胡松, 向军. 废弃钒钛系选择性催化还原催化剂重金属浸出特性[J]. 化工进展, 2018, 37(10): 3873-3878.

DAI Zejun, WANG Lele, TANG Hao, SU Sheng, YANG Tao, LIU Wei, XU Kai, WANG Yi, HU Song, XIANG Jun. Leaching characteristics of the heavy metals in spent vanadium and titanium SCR catalyst[J]. Chemical Industry and Engineering Progress, 2018, 37(10): 3873-3878.

参考文献

[1] 中国环境保护产业协会脱硫脱硝委员会. 脱硫脱硝行业2014年发展综述[J]. 中国环保产业, 2015(12):4-23. China Association of Environmental Protection Desulfurization and Denitrification Committee. 2014 development overview of desulfurization and denitrification industry[J]. China Environmental Protection Industry, 2015(12):4-23.
[2] 余岳溪,廖永进,李娟,等. 废弃SCR脱硝催化剂无害化处理的研究进展[J]. 环境工程, 2016, 34(6):136-139. YU Yuexi, LIAO Yongjin, LI Juan, et al. Research progress of harmless treatment of waste SCR denitration catalysts[J]. Environmental Engineering, 2016, 34(6):136-139.
[3] 唐昊, 李文艳, 王琦, 等. 商用选择性催化还原催化剂SO₂氧化率控制研究进展[J]. 化工进展, 2017, 36(6):2143-2149. TANG Hao, LI Wenyan, WANG Qi, et al. Research progress on the control of SO₂ oxidation by commercial SCR catalyst[J]. Chemical Industry and Engineering Progress, 2017, 36(6):2143-2149.
[4] PENG Y, LI J, SI W, et al. Deactivation and regeneration of a commercial SCR catalyst:comparison with alkali metals and arsenic[J]. Applied Catalysis B:Environmental, 2015, 168:195-202.
[5] 赵炜, 于爱华, 王虎, 等. 湿法工艺回收板式SCR废弃催化剂中的钛, 钒, 钼[J]. 化工进展, 2015, 34(7):2039-2042. ZHAO Wei, YU Aihua, WANG Hu, et al. Recovery of waste SCR catalyst from titanium, vanadium and molybdenum by wet method[J]. Chemical Industry and Engineering Progress, 2015, 34(7):2039-2042.
[6] YU Y, WANG J, CHEN J, et al. Regeneration of commercial selective catalyst reduction catalysts deactivated by Pb and other inorganic elements[J]. Journal of Environmental Sciences, 2016, 47:100-108.
[7] MAZUREK K. Recovery of vanadium, potassium and iron from a spent vanadium catalyst by oxalic acid solution leaching, precipitation and ion exchange processes[J]. Hydrometallurgy, 2013, 134:26-31.
[8] KIM J W, LEE W G, HWANG I S, et al. Recovery of tungsten from spent selective catalytic reduction catalysts by pressure leaching[J]. Journal of Industrial and Engineering Chemistry, 2015, 28:73-77.
[9] 陈晨, 陆强, 蔺卓玮, 等. 燃煤电厂废弃SCR脱硝催化剂元素回收研究进展[J]. 化工进展, 2016, 35(10):3306-3312. CHEN Chen, LU Qiang, LIN Zhuowei, et al. Research progress of element recovery of waste De-NO_x SCR catalyst from coal-fired power plants[J]. Chemical Industry and Engineering Progress, 2016, 35(10):3306-3312.
[10] ZHAO Z, GUO M, ZHANG M. Extraction of molybdenum and vanadium from the spent diesel exhaust catalyst by ammonia leaching method[J]. Journal of Hazardous Materials, 2015, 286:402-409.
[11] KIM A G. The effect of alkalinity of Class F PC fly ash on metal release[J]. Fuel, 2006, 85(10):1403-1410.
[12] WANG J, BAN H, TENG X, et al. Impacts of pH and ammonia on the leaching of Cu(Ⅱ) and Cd(Ⅱ) from coal fly ash[J]. Chemosphere, 2006, 64(11):1892-1898.
[13] JANKOWSKI J, WARD C R, FRENCH D, et al. Mobility of trace elements from selected Australian fly ashes and its potential impact on aquatic ecosystems[J]. Fuel, 2006, 85(2):243-256.
[14] VAN DER HOEK E E, COMANS R N J. Modeling arsenic and selenium leaching from acidic fly ash by sorption on iron (hydr) oxide in the fly ash matrix[J]. Environmental Science & Technology, 1996, 30(2):517-523.
[15] AL-ABED S R, JEGADEESAN G, PURANDARE J, et al. Arsenic release from iron rich mineral processing waste:influence of pH and redox potential[J]. Chemosphere, 2007, 66(4):775-782.
[16] VAN DER HOEk E E, BONOUVRIE P A, COMANS R N J. Sorption of As and Se on mineral components of fly ash:relevance for leaching processes[J]. Appl. Geochem., 1994, 9:403-412.
[17] VAN DER SLOOT H A, VAN ZOMEREN A, RIETRA R, et al. Integration of lab-scale testing, lysimeter studies and pilot scale monitoring of a predominantly inorganic waste landfill to reach sustainable landfill conditions[C]//8th Waste Management and Landfill Symposium, 2001:255-264.
[18] 刘锋, 王琪, 黄启飞, 等. 固体废物浸出毒性浸出方法标准研究[J]. 环境科学研究, 2008, 21(6):9-15. LIU Feng, WANG Qi, HUANG Qifei, et al. Study on the standard methods of leaching toxicity of solid waste[J]. Research of Environmental Sciences, 2008, 21(6):9-15.
[19] BORDAS F, BOURG A. Effect of solid/liquid ratio on the remobilization of Cu, Pb, Cd and Zn from polluted river sediment[J]. Water, Air, & Soil Pollution, 2001, 128(3):391-400.
[20] ROY A, STEGEMANN J A. Nickel speciation in cementstabilized/solidified metal treatment filtercakes[J]. Journal of Hazardous Materials, 2017, 321:353-361.
[21] 冯军会, 何品晶, 曹群科, 等. 垃圾焚烧飞灰中重金属浸出的影响因素[J]. 环境化学, 2005, 24(4):438-442. FENG Junhui, HE Pinjing, CAO Qunke, et al. Influence factors of heavy metals leaching in fly ash from waste incinerator[J]. Environmental Chemistry, 2005, 24(4):438-442.

废弃钒钛系选择性催化还原催化剂重金属浸出特性

Leaching characteristics of the heavy metals in spent vanadium and titanium SCR catalyst

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	马伊, 曹世伟, 王家骏, 林立群, 邢延, 曹腾良, 卢峰, 赵振伦, 张志军. 低共熔溶剂回收废旧锂离子电池正极材料的研究进展[J]. 化工进展, 2023, 42(S1): 219-232.
[2]	张明焱, 刘燕, 张雪婷, 刘亚科, 李从举, 张秀玲. 非贵金属双功能催化剂在锌空气电池研究进展[J]. 化工进展, 2023, 42(S1): 276-286.
[3]	时永兴, 林刚, 孙晓航, 蒋韦庚, 乔大伟, 颜彬航. 二氧化碳加氢制甲醇过程中铜基催化剂活性位点研究进展[J]. 化工进展, 2023, 42(S1): 287-298.
[4]	谢璐垚, 陈崧哲, 王来军, 张平. 用于SO₂去极化电解制氢的铂基催化剂[J]. 化工进展, 2023, 42(S1): 299-309.
[5]	杨霞珍, 彭伊凡, 刘化章, 霍超. 熔铁催化剂活性相的调控及其费托反应性能[J]. 化工进展, 2023, 42(S1): 310-318.
[6]	李世霖, 胡景泽, 王毅霖, 王庆吉, 邵磊. 电渗析分离提取高值组分的研究进展[J]. 化工进展, 2023, 42(S1): 420-429.
[7]	许春树, 姚庆达, 梁永贤, 周华龙. 共价有机框架材料功能化策略及其对Hg(Ⅱ)和Cr(Ⅵ)的吸附性能研究进展[J]. 化工进展, 2023, 42(S1): 461-478.
[8]	王敏, 毛玉红, 陈超, 白丹. 水处理工艺中铝盐水解物的毒性、形态及控制研究进展[J]. 化工进展, 2023, 42(S1): 479-488.
[9]	王乐乐, 杨万荣, 姚燕, 刘涛, 何川, 刘逍, 苏胜, 孔凡海, 朱仓海, 向军. SCR脱硝催化剂掺废特性及性能影响[J]. 化工进展, 2023, 42(S1): 489-497.
[10]	邓丽萍, 时好雨, 刘霄龙, 陈瑶姬, 严晶颖. 非贵金属改性钒钛基催化剂NH₃-SCR脱硝协同控制VOCs[J]. 化工进展, 2023, 42(S1): 542-548.
[11]	邵博识, 谭宏博. 锯齿波纹板对挥发性有机物低温脱除过程强化模拟分析[J]. 化工进展, 2023, 42(S1): 84-93.
[12]	程涛, 崔瑞利, 宋俊男, 张天琪, 张耘赫, 梁世杰, 朴实. 渣油加氢装置杂质沉积规律与压降升高机理分析[J]. 化工进展, 2023, 42(9): 4616-4627.
[13]	王鹏, 史会兵, 赵德明, 冯保林, 陈倩, 杨妲. 过渡金属催化氯代物的羰基化反应研究进展[J]. 化工进展, 2023, 42(9): 4649-4666.
[14]	张启, 赵红, 荣峻峰. 质子交换膜燃料电池中氧还原反应抗毒性电催化剂研究进展[J]. 化工进展, 2023, 42(9): 4677-4691.
[15]	王伟涛, 鲍婷玉, 姜旭禄, 何珍红, 王宽, 杨阳, 刘昭铁. 醛酮树脂基非金属催化剂催化氧气氧化苯制备苯酚[J]. 化工进展, 2023, 42(9): 4706-4715.