化工进展 ›› 2017, Vol. 36 ›› Issue (06): 2017-2022.DOI: 10.16085/j.issn.1000-6613.2017.06.007

• 化工过程与装备 • 上一篇    下一篇

内翅板蒸发式冷凝器水膜流动特性

吴学红, 陆刘记, 刘旭, 龚毅   

  1. 郑州轻工业学院能源与动力工程学院, 河南 郑州 450002
  • 收稿日期:2016-10-26 修回日期:2017-01-01 出版日期:2017-06-05 发布日期:2017-06-05
  • 通讯作者: 吴学红
  • 作者简介:吴学红(1979—),男,博士,副教授,研究方向为制冷与低温设备节能技术、能源利用等。E-mail:wuxh1212@163.com。
  • 基金资助:
    国家自然科学基金(51476149)、河南省杰出青年基金(154100510014)及河南省教育厅创新团队项目(17IRTSTHN029)。

Experimental study on the water film flowing characteristics of the internal fin-plate evaporative condenser

WU Xuehong, LU Liuji, LIU Xu, GONG Yi   

  1. School of Energy and Power Engineering, Zhengzhou University of Light Industry, Zhengzhou 450002, Henan, China
  • Received:2016-10-26 Revised:2017-01-01 Online:2017-06-05 Published:2017-06-05

摘要: 为了提高蒸发式冷凝器板外换热性能以及增强板外气液两相流动,设计了4种新型内翅板蒸发式冷凝器换热板片结构,实验测试不同喷淋密度下各换热板片上的水膜流动形态及喷淋密度对板片换热性能的影响。结果表明:水膜厚度随喷淋密度减小而减薄;喷淋密度较大时,受板片结构及气液剪切力影响,水膜流动向中心区域聚集,且部分区域会出现水膜飞溅现象;随着喷淋密度减小,水膜飞溅现象逐渐消失,但在低喷淋密度时部分板片会有“干斑”现象。半圆波纹板片在喷淋密度分别为0.524kg/(m·s)、0.738kg/(m·s)、0.905kg/(m·s)时,换热性能均优于其他换热板片,且在此喷淋密度时,板片换热面积及水膜稳定时间是影响其换热性能的主要因素。本实验研究为内翅板蒸发冷凝器的工程应用和设计提供理论指导。

关键词: 气液两相流, 蒸发, 传热, 水膜, 喷淋密度

Abstract: In order to improve heat transfer performance of the evaporative condenser plate and enhance the gas-liquid two-phase flow,four heat-exchange plates of internal fin-plate evaporative condenser were developed. The water film flowing form with different spray densities and the influence of spray density on heat transfer of heat-exchange plate were investigated. The results showed that the thickness of water film thinned with the decrease of the spray density. Affected by the plate type and gas fluid shear stress,water film flowing gathered toward the center area,and the splash of water film appeared in local area with larger spray density. With the decrease of spray density,the splash of water film disappear gradually. However,in the low spray density,the “dry sports”phenomenon had produced on the some internal fin-plate. When the spray density were 0.524kg/(m·s),0.738kg/(m·s),0.905kg/(m·s),the performance of heat transfer of semicircle corrugated plate was superior to the other plates. Also,heat-exchange area of plate and stable time of water film were the main factors that affected heat transfer performance under these spay densities. The experimental results provide the theoretical reference of engineering application and design of internal fin-plate evaporative condenser.

Key words: gas-liquid two-phase flow, evaporation, heat transfer, water film, spray density

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn