复合中空热管冷凝侧传热特性

化工进展

复合中空热管冷凝侧传热特性

崔腾飞1，肖章平1，曹马林2，张琳1，蒋枫1

1常州大学机械工程学院，江苏常州213016；2 泰州梅兰化工有限公司，江苏泰州321200

出版日期:2014-11-05 发布日期:2014-11-05

Experimental investigation of heat transfer characteristics of condensation section in composite hollow heat pipe

CUI Tengfei1，XIAO Zhangping1，CAO Malin2，ZHANG Lin1，JIANG Feng1

1School of Mechanical Engineering，Changzhou University，Changzhou 213016，Jiangsu，China；2 Taizhou Meilan Chemical Co.，Ltd.，Taizhou 321200，Jiangsu，China

Online:2014-11-05 Published:2014-11-05

摘要/Abstract

摘要： 复合中空热管能够有效解决普通重力热管换热设备的酸露点腐蚀问题，在回收低温烟气（<200℃）余热领域有重要的应用。建立了复合中空热管传热实验平台，对复合中空热管冷凝侧传热特性进行了实验研究。实验所用热管管长1080mm，不锈钢材质，工作介质为甲醇；热管蒸发侧和冷凝侧分别采用电加热和水冷却方式，K型热电偶被用于测量管壁温度和冷却水进出口温度，真空压力传感器测量管内蒸气饱和压力；研究了充液率（15%≤V+≤40%）和蒸发侧热流密度（9.48kW/m2≤q≤37.91kW/m2）对冷凝侧传热特性的影响。结果表明：当充液率为20%时，复合中空热管冷凝侧均温性能最好，冷凝侧换热系数最大，传热性能最佳；随着蒸发侧热流密度的增大，复合中空热管有效冷凝长度增大，冷凝侧换热系数增大。实验研究为工业应用提供了基础。

关键词: 复合中空热管, 传热, 充液率, 热流密度

Abstract: The composite hollow heat pipe can effectively solve the problem of acid dew corrosion of heat exchanger equipment comprising ordinary gravity heat pipe，and has an important application in recycling waste heat of low temperature flue gas. A heat transfer experimental platform of composite hollow heat pipe was established，and the heat transfer characteristics of condensation section were investigated experimentally. A stainless steel tube of total length of 1080mm with methanol was studied. Electrical heating was used in the evaporation section and water cooling was used in the condensation section. Wall temperatures and inlet and outlet temperatures of cooling water were measured with K type thermocouples. Vapor saturation pressure in heat pipe was measured by vacuum pressure sensor. The effect of two parameters：filling rate (15%≤V+≤40%) and evaporator heat flux (9.48kW/m2≤q≤37.91kW/m2) on the heat transfer characteristics of condensation section were investigated. When filling rate was 20%，the composite hollow heat pipe had the maximum condensation heat transfer coefficient and showed the best isothermal characteristics of its condensation section and the best heat transfer performance. Besides，with the increase of evaporator heat flux，the effective condensation length of the composite hollow heat pipe and the condensation heat transfer coefficient increased. Experimental investigation provides a basis for industrial applications.

Key words: composite hollow heat pipe, heat transfer, filling rate, heat flux

崔腾飞1，肖章平1，曹马林2，张琳1，蒋枫1. 复合中空热管冷凝侧传热特性[J]. 化工进展.

CUI Tengfei1，XIAO Zhangping1，CAO Malin2，ZHANG Lin1，JIANG Feng1. Experimental investigation of heat transfer characteristics of condensation section in composite hollow heat pipe [J]. Chemical Industry and Engineering Progree.

[1]	肖辉, 张显均, 兰治科, 王苏豪, 王盛. 液态金属绕流管束流动传热进展[J]. 化工进展, 2023, 42(S1): 10-20.
[2]	赵晨, 苗天泽, 张朝阳, 洪芳军, 汪大海. 负压状态窄缝通道乙二醇水溶液传热特性[J]. 化工进展, 2023, 42(S1): 148-157.
[3]	惠博, 侯宏艺, 张涛, 车生文. 圆柱形环状脉动热管烧干特性[J]. 化工进展, 2023, 42(S1): 33-40.
[4]	陈林, 徐培渊, 张晓慧, 陈杰, 徐振军, 陈嘉祥, 密晓光, 冯永昌, 梅德清. 液化天然气绕管式换热器壳侧混合工质流动及传热特性[J]. 化工进展, 2023, 42(9): 4496-4503.
[5]	卜治丞, 焦波, 林海花, 孙洪源. 脉动热管计算流体力学模型与研究进展[J]. 化工进展, 2023, 42(8): 4167-4181.
[6]	汪健生, 张辉鹏, 刘雪玲, 傅煜郭, 朱剑啸. 多孔介质结构对储层内流动和换热特性的影响[J]. 化工进展, 2023, 42(8): 4212-4220.
[7]	王云刚, 焦健, 邓世丰, 赵钦新, 邵怀爽. 冷凝换热与协同脱硫性能实验分析[J]. 化工进展, 2023, 42(8): 4230-4237.
[8]	郭文杰, 翟玉玲, 陈文哲, 申鑫, 邢明. Al₂O₃-CuO/水混合纳米流体对流传热性能及热经济性分析[J]. 化工进展, 2023, 42(5): 2315-2324.
[9]	刘厚励, 顾中浩, 阳康, 张莉. 3D打印槽道结构槽宽对池沸腾传热特性的影响[J]. 化工进展, 2023, 42(5): 2282-2288.
[10]	张晨宇, 王宁, 徐洪涛, 罗祝清. 纳米颗粒强化传热的多级潜热储热器性能评价[J]. 化工进展, 2023, 42(5): 2332-2342.
[11]	马润梅, 杨海超, 李正大, 李双喜, 赵祥, 章国庆. 表面强化镀层对高速轴承腔密封端面变形及摩擦磨损影响分析[J]. 化工进展, 2023, 42(4): 1688-1697.
[12]	尚玉, 肖满, 崔秋芳, 涂特, 晏水平. CO₂捕集工艺中热再生气余热的PVDF/BN-OH平板复合膜回收特性[J]. 化工进展, 2023, 42(3): 1618-1628.
[13]	邹银才, 李清国, 吴辉, 钟小兵, 陈咸志. 弹载相变热沉传热仿真与优化[J]. 化工进展, 2023, 42(3): 1248-1256.
[14]	高婷婷, 蒋振, 吴晓毅, 郝婷婷, 马学虎, 温荣福. 微乳液脉动热管应用于锂离子电池的散热性能[J]. 化工进展, 2023, 42(3): 1167-1177.
[15]	余俊声, 朱晔, 李乾坤, 徐士轩, 张昕阳, 汪城, 屈健. 升降热流条件下的脉动热管性能[J]. 化工进展, 2023, 42(3): 1178-1186.