[1] 宋文佳,唐黎华,朱学栋,等. Shell气化炉中灰渣的熔融特性与流动特性[J]. 化工学报,2009,60(7):1781-1786. [2] SONG Wenjia,TANG Lihua,ZHU Xuedong,et al. Effect of coal ash composition on ash fusion temperatures[J]. Energy & Fuels,2009, 24(1):182-189. [3] SONG Wenjia,TANG Lihua,ZHU Xuedong,et al. Fusibility and flow properties of coal ash and slag[J]. Fuel,2009,88(2):297-304. [4] DEMIRBAS A. Sustainable cofiring of biomass with coal[J]. Energy Conversion and Management,2003,44(9):1465-1479. [5] 李德侠,周志杰,郭庆华,等. 榆林煤灰熔融特性及黏温特性[J]. 化工学报,2012,63(1):9-17. [6] 魏砾宏,马婷婷,李润东,等. 灰中酸性成分对灰熔融温度的影响[J]. 燃料化学学报,2014,42(10):1205-1211. [7] VAN DYK J C. Understanding the influence of acidic components (Si,Al,and Ti)on ash flow temperature of South African coal sources[J]. Minerals Engineering,2006,19(3):280-286. [8] GUPTA S K,GUPTA R P,BRYANT G W,et al. The effect of potassium on the fusibility of coal ashes with high silica and alumina levels[J]. Fuel,1998,77(11):1195-1201. [9] 李帆,邱建荣,郑楚光. 煤中矿物质对灰熔融温度影响的三元相图分析[J]. 华中理工大学学报,1996,24(10):96-99. [10] 陈晓东,孔令学,白进,等. 高温气化条件下Na2O对煤灰中矿物质演化行为的影响[J]. 燃料化学学报,2016,44(3):263-272. [11] 刘涛,陈雪莉,李德侠,等. 生物质与煤混合灰的熔融及黏温特性[J]. 化工学报,2012,63(4):1217-1225. [12] 高娜,刘胜华,刘勇晶,等. 碱性氧化物对煤灰熔融特性的影响及机理研究[J]. 煤炭转化,2014,37(3):42-45. [13] 张浩. 基于灰成分的生物质结渣特性研究[D]. 济南:山东大学能源与动力工程学院,2010. [14] REIFENSTEIN A P,KAHRAMAN H,COIN C D A,et al. Behaviour of selected minerals in an improved ash fusion test:quartz,potassium feldspar,sodium feldspar,kaolinite,illite,calcite,dolomite,siderite, pyrite and apatite[J]. Fuel,1999,78(12):1449-1461. [15] LI H X,YOSHIHIKO N,DONG Z B,et al. Application of the FactSage to predict the ash melting behavior in reducing conditions[J]. Chinese Journal of Chemical Engineering,2006,14(6):784-789. [16] WANG Y,XIANG Y,WANG D,et al. Effect of sodium oxides in ash composition on ash fusibility[J]. Energy & Fuels,2016,30(2):1437-1444. [17] VAN DYK J C,KEYSER M J. Influence of discard mineral matter on slag-liquid formation and ash melting properties of coal:a FACTSAGETM simulation study[J]. Fuel,2014,116:834-840. [18] 中国煤炭工业协会. 煤灰熔融性测定方法:GB/T 219-2008[J]. 北京:中国标准出版社,2009. |