化工进展 ›› 2022, Vol. 41 ›› Issue (9): 4682-4690.DOI: 10.16085/j.issn.1000-6613.2021-2473

• 化工过程与装备 • 上一篇    下一篇

疏水Rushton搅拌桨的减阻性能

杨锋苓1,2,3(), 梁国林4, 张翠勋4, 王贵超1,2,3   

  1. 1.山东大学机械工程学院,山东 济南 250061
    2.高效洁净机械制造教育部重点实验室(山东大学),山东 济南 250061
    3.山东大学机械工程国家级实验教学示范中心,山东 济南 250061
    4.山东天力能源股份有限公司,山东 济南 250100
  • 收稿日期:2021-12-02 修回日期:2022-01-13 出版日期:2022-09-25 发布日期:2022-09-27
  • 通讯作者: 杨锋苓
  • 作者简介:杨锋苓(1979—),男,博士,副教授,硕士生导师,研究方向为流体搅拌混合。E-mail:fly@sdu.edu.cn

Drag reduction performance of a hydrophobic Rushton impeller

YANG Fengling1,2,3(), LIANG Guolin4, ZHANG Cuixun4, WANG Guichao1,2,3   

  1. 1.School of Mechanical Engineering, Shandong University, Jinan 250061, Shandong, China
    2.Key Lab of High-efficiency and Clean Mechanical Manufacture (Shandong University), Ministry of Education, Jinan 250061, Shandong, China
    3.National Experimental Teaching Demonstration Center of Mechanical Engineering, Shandong University, Jinan 250061, Shandong, China
    4.Shandong Tianli Energy Co. , Ltd. , Jinan 250100, Shandong, China
  • Received:2021-12-02 Revised:2022-01-13 Online:2022-09-25 Published:2022-09-27
  • Contact: YANG Fengling

摘要:

为了减小搅拌阻力与功耗,本研究提出了疏水叶片搅拌桨的设想。首先采用数值模拟的方法,对非疏水Rushton桨搅拌容器内的流场进行了模拟,通过与文献中实验结果的对比,验证了数值模型和模拟方法的可靠性。随后研究了湍流状态下疏水Rushton搅拌桨的流体动力学性能,分析了不同疏水状态下的流场结构、剪应力和压力分布以及减阻效果和搅拌功耗,并与非疏水桨进行了对比。结果表明,疏水处理后Rushton桨搅拌容器内的流场没有明显变化,但流体的轴向泵送能力有所增强,高速度区域略有扩大,超疏水时效果更明显。疏水处理可降低Rushton桨的剪应力和桨叶前后表面间的压差,具有减阻效果,超疏水时减阻幅度高达39.56%。另外,疏水Rushton桨的搅拌功耗有所降低,与非疏水桨相比,超疏水桨的功率准数降低了8.53%,具有显著的节能效应。

关键词: 搅拌容器, 疏水Rushton搅拌桨, 流体动力学, 功耗, 减阻, 数值模拟

Abstract:

For the purpose of reducing drag and power consumption during the stirring of fluid within the vessel, a hydrophobic Rushton impeller was proposed. Firstly, flow field in the vessel stirred with a non-hydrophobic Rushton impeller was numerically studied. Through comparison with the experimental results from literature, the reliability of the numerical model and the simulation method was verified. Subsequently, the hydrodynamic performance of the hydrophobic Rushton impeller under turbulent flow regime was simulated. The flow field, shear stress and pressure distribution, drag reduction effect and power consumption under different hydrophobic conditions were analyzed, and comparisons were made with their counterparts of the non-hydrophobic Rushton impeller. Results showed that although the flow field was not significantly changed, the axial pumping capacity and the high velocity area within the impeller discharge flow region were slightly increased, especially for the super-hydrophobic Rushton impeller. For the hydrophobic Rushton impeller, the wall shear stress and pressure difference between the front and rear surfaces of the blades were reduced. Besides, the drag reduction effect was observed and the drag reduction ratio of the super-hydrophobic Rushton impeller was as high as 39.56%. Besides, power consumption of hydrophobic Rushton impeller can be reduced. Compared with the non-hydrophobic Rushton impeller, power number of the super-hydrophobic Rushton impeller was decreased by 8.53%, which had a significant energy-saving effect.

Key words: stirred vessel, hydrophobic Rushton impeller, hydrodynamics, power consumption, drag reduction, numerical simulation

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn