化工进展 ›› 2022, Vol. 41 ›› Issue (4): 2082-2089.DOI: 10.16085/j.issn.1000-6613.2021-0892

• 精细化工 • 上一篇    下一篇

KF/MgO催化甘油和碳酸二甲酯酯交换合成甘油碳酸酯

陈丹阳1(), 朱建宇1, 吴勤1,2, 王自庆1(), 张金利1,3()   

  1. 1.石河子大学化学化工学院,新疆兵团绿色化工过程重点实验室,新疆 石河子 832001
    2.石河子大学分析测试中心,新疆 石河子 832001
    3.天津大学化学化工学院,天津 300027
  • 收稿日期:2021-04-26 修回日期:2021-08-13 出版日期:2022-04-23 发布日期:2022-04-25
  • 通讯作者: 王自庆,张金利
  • 作者简介:陈丹阳(1996—),女,硕士研究生,研究方向为精细化学品催化合成。E-mail:chenjiao19960110@163.com
  • 基金资助:
    国家自然科学基金(21968028);新疆生产建设兵团强青科技创新骨干人才项目(2021CB031);石河子大学高层次人才科研启动经费(RCZK2018C25)

KF/MgO catalyzed transesterification of glycerol and dimethyl carbonate to glycerol carbonate

CHEN Danyang1(), ZHU Jianyu1, WU Qin1,2, WANG Ziqing1(), ZHANG Jinli1,3()   

  1. 1.Key Laboratory for Green Process of Chemical Engineering of Xinjiang Bingtuan, School of Chemistry and Chemical Engineering, Shihezi University, Shihezi 832001, Xinjiang, China
    2.Analysis and Testing Center, Shihezi University, Shihezi 832001, Xinjiang, China
    3.School of Chemistry and Chemical Engineering, Tianjin University, Tianjin 300027, China
  • Received:2021-04-26 Revised:2021-08-13 Online:2022-04-23 Published:2022-04-25
  • Contact: WANG Ziqing,ZHANG Jinli

摘要:

采用浸渍法制备KF/MgCO3前体,经高温焙烧后获得了一系列KF/MgO固体碱催化剂,用于催化碳酸二甲酯(DMC)和甘油(GL)酯交换反应合成甘油碳酸酯(GC)。系统考察了KF负载量和焙烧温度对催化剂活性的影响,并通过X射线衍射、N2吸脱附等温线、扫描电子显微镜和哈米特酸碱滴定等一系列技术对催化剂的结构性能进行了表征。结果表明,当KF负载量为20%(质量分数)时,经550℃焙烧所获得的20%KF/MgO-550催化剂活性最高。经过反应工艺条件的优化,当催化剂与甘油的相对质量分数为2%,DMC与GL的摩尔比为3∶1,75℃条件下反应1.5h后,GC收率可以达到96.8%。当20%KF/MgO-550催化剂重复使用3次之后,GC的收率由96.8%降低到67.3%,经再生处理后20%KF/MgO-550的催化活性可以恢复并且表现出更优异的稳定性。

关键词: 催化剂, 多相反应, 碳酸二甲酯, 酯交换, 甘油碳酸酯

Abstract:

A series of KF/MgO catalysts were prepared from the high temperature impregnated KF/MgCO3 precursor, and then employed as solid base catalysts for the transesterification of dimethyl carbonate (DMC) and glycerol (GL) to glycerol carbonate (GC). The effects of KF content and calcination temperature on the catalytic performance were systematically investigated, and the structure of these catalysts were characterized by XRD, N2 adsorption-desorption, SEM and Hammett acid-base titration. The 20%KF/MgO-550 sample calcinated at 550℃ with 20%KF loading was found to be the best catalyst for this reaction. The highest GC yield of 96.8% were obtained at the optimum reaction conditions of molar ratio of DMC to GL 3∶1, catalyst dosage of 2.0% (relative to GL mass), 75℃, and 1.5h reaction time. The GC yield over 20%KF/MgO-550 could drop from 96.8% to 67.3% in the third run, but the catalytic activity can be restored with more excellent stability after regeneration.

Key words: catalyst, multiphase reaction, dimethyl carbonate, transesterification, glycerol carbonate

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn