1 |
肖娟, 简冠平, 王家瑞, 等. 缠绕管式换热器性能及应用研究进展[J]. 化工机械, 2016, 43(4): 423-428.
|
|
XIAO J, JIAN G P, WANG J R, et al. Progress in performance and application study for wound-tube heat exchanger[J]. Chemical Engineering & Machinery, 2016, 43(4): 423-428.
|
2 |
于清野. 缠绕管式换热器计算方法研究[D]. 大连: 大连理工大学, 2011.
|
|
YU Qingye. Research on calculation method for helical wound coil tube heat exchangers[D]. Dalian: Dalian University of Technology, 2011.
|
3 |
薛佳幸. 缠绕管式换热器换热工艺研究[D]. 兰州: 兰州交通大学, 2015.
|
|
XUE J X. Research on heat transfer process of coil-wound heat exchanger[D]. Lanzhou: Lanzhou Jiatong University, 2015.
|
4 |
ZENG M, ZHANG G P, LI Y, et al. Geometrical parametric analysis of flow and heat transfer in the shell side of a spiral-wound heat exchanger[J]. Heat Transfer Engineering, 2015, 36(9): 790-805.
|
5 |
REN Y, CAI W H, JIANG Y Q. Numerical study on shell-side flow and heat transfer of spiral-wound heat exchanger under sloshing working conditions[J]. Applied Thermal Engineering, 2018, 134(7):287-297.
|
6 |
王定标, 胡祥报, 郭茶秀, 等. 大型纵流壳程换热器三维流动与传热数值模拟[J]. 郑州大学学报(工学版), 2002, 23(3): 13-18.
|
|
WANG D B, HU X B, GUO C X, et al. Simulation technology of fluid flow and heat transfer in large heat exchanger with longitudinal flow of shellside[J]. Journal of Zhengzhou University (Engineering Edition), 2002, 23(3): 13-18.
|
7 |
王斯民, 简冠平, 肖娟, 等. 缠绕管式换热器结构参数多目标优化数值模拟研究[J]. 西安交通大学学报, 2017, 51(5): 9-15.
|
|
WANG S M, JIAN G P, XIAO J, et al. Multi-objective optimization on the structural parameters of spiral wound heat exchanger[J]. Journal of Xi’an Jiaotong University, 2017, 51(5): 9-15.
|
8 |
尹接喜, 李清海, 施德强, 等. 缠绕管换热器并管传热模型及实验[J]. 清华大学学报(自然科学版), 2000, 40(6): 73-75, 79.
|
|
YIN J X, LI Q H, SHI D Q, et al. Heat transfer model land experiment for paired-tubes wound-tube heat exchangers[J]. Journal of Tsinghua University (Science and Technology), 2000, 40(6): 73-75, 79.
|
9 |
PACIO J C, DORAO C A. A review on heat exchanger thermal hydraulic models for cryogenic applications[J]. Cryogenics, 2011, 51(7): 366-379.
|
10 |
TANG Q X, CHEN G F, YANG Z Q, et al. Numerical investigation on gas flow heat transfer and pressure drop in the shell side of spiral-wound heat exchangers[J]. Science China Technological Sciences, 2018, 61(4): 506-515.
|
11 |
RAINIERI S, ZOZZOLI F, CATANI L, et al. Compound convective heat transfer enhancement in helically coiled wall corrugated tubes[J]. International Journal of Heat and Mass Transfer, 2013, 59(3): 353-362.
|
12 |
NAPHON P. Thermal performance and pressure drop of the helical-coil heat exchangers with and without helically crimped fins[J]. International Communications in Heat and Mass Transfer, 2007, 34(3):321-330.
|
13 |
NEERAAS B, FREDHEIM A, AUNAN B. Experimental data and model for heat transfer, in liquid falling film flow on shell-side, for spiral-wound LNG heat exchanger[J]. International Journal of Heat and Mass Transfer, 2004, 47(14/15/16): 3565-3572.
|
14 |
NEERAAS B, FREDHEIM A, AUNAN B. Experimental shell-side heat transfer and pressure drop in gas flow for spiral-wound LNG heat exchanger[J]. International Journal of Heat and Mass Transfer, 2004, 47(2): 353-361.
|
15 |
LU X, DU X P, ZENG M, et al. Shell-side thermal-hydraulic performances of multilayer spiral-wound heat exchangers under different wall thermal boundary conditions[J]. Applied Thermal Engineering, 2014, 70(2): 1216-1227.
|
16 |
文键, 童欣, 杨辉著, 等. 垫条对缠绕管换热器壳侧性能的影响研究[J]. 西安交通大学学报, 2016, 50(11): 14-20.
|
|
WEN J, TONG X, YANG H Z, et al. Effects of space bars on the shell-side performance of spiral-wound heat exchanger[J]. Journal of Xi’an Jiaotong University, 2016, 50(11): 14-20.
|
17 |
王斯民, 孙利娟, 宋晨, 等. 基于开槽强化管的缠绕管换热器传热强化研究[J]. 高校化学工程学报, 2019, 33(6): 1337-1343.
|
|
WANG S M, SUN L J, SONG C, et al. Heat transfer enhancement of spiral-wound heat exchangers based on grooved enhanced tubes[J]. Journal of Chemical Engineering of Chinese Universities, 2019, 33(6): 1337-1343.
|
18 |
WANG S M, JIAN G P, TONG X, et al. Effects of spacing bars on the performance of spiral-wound heat exchanger and the fitting of empirical correlations[J]. Applied Thermal Engineering, 2018, 128(1): 1351-1358.
|
19 |
李书磊, 鹿来运, 陈杰, 等. 结构参数对缠绕管式换热器管侧换热影响模拟研究[J]. 节能技术, 2017, 35(6): 498-504.
|
|
LI S L, LU L Y, CHEN J, et al. Numerical simulation for the impact of structural parameters on heat transfer in the tube-side flow of spiral-wound LNG heat exchanger[J]. Energy Conservation Technology, 2017, 35(6): 498-504.
|
20 |
马飞. 螺旋缠绕管换热器传热数值模拟[D]. 郑州: 郑州大学, 2014.
|
|
MA F. Numerical simulation of heat transfer of spiral coiled heat exchanger[D]. Zhengzhou: Zhengzhou University, 2014.
|
21 |
邓静. 螺旋缠绕管换热器流动传热性能研究[D]. 郑州: 郑州大学, 2016.
|
|
DENG J. The heat transfer and flow characteristics analysis of helically coiled tube heat exchanger[D]. Zhengzhou: Zhengzhou University, 2016.
|
22 |
田杨, 陈光辉, 李建隆. 水滴型缠绕管换热器壳程流动与传热研究[J]. 化工设计通讯, 2017, 43(7): 147-149, 151.
|
|
TIAN Y, CHEN G H, LI J L. Study on flow and heat transfer of shell-side coil-wound heat exchanger in water drop type[J]. Chemical Engineering Design Communications, 2017, 43(7): 147-149, 151.
|
23 |
吴志勇, 陈杰, 浦晖, 等. LNG绕管式换热器壳侧过热态流动的数值模拟[J]. 煤气与热力, 2014, 34(8): 48-53.
|
|
WU Z Y, CHEN J, PU H, et al. Numerical simulation of superheated flow of refrigerant at shell side of LNG spiral wound heat exchanger[J]. Gas & Heat, 2014, 34(8): 48-53.
|
24 |
文键, 杨辉著, 杜冬冬, 等. 螺旋折流板换热器换热强化的数值研究[J]. 西安交通大学学报, 2014, 48(9): 43-48.
|
|
WEN J, YANG H Z, DU D D, et al. Numerical simulation for heat transfer enhancement of a heat exchanger with helical baffles[J]. Journal of Xi’an Jiaotong University, 2014, 48(9): 43-48.
|
25 |
文键, 杨辉著, 王斯民, 等. 旋梯式螺旋折流板换热器优化结构的数值模拟[J]. 西安交通大学学报, 2014, 48(11): 8-14.
|
|
WEN J, YANG H Z, WANG S M, et al. Numerical simulation for configuration optimization of heat exchanger with helical baffles[J]. Journal of Xi’an Jiaotong University, 2014, 48(11): 8-14.
|
26 |
王福军. 计算流体动力学分析:CFD软件原理与应用[M]. 北京: 清华大学出版社, 2004.
|
|
WANG F J. Computational fluid dynamics analysis-theory and application of CFD software[M]. Beijing: Tsinghua University Press, 2004.
|