[1] 汪震,潘娇,裴后昌,等.质子交换膜燃料电池低温启动研究现状[J].电池工业,2012,17(6):375-381. WANG Zhen,PAN Jiao,PEI Houchang,et al. Review on cold start of proton exchange membrane fuel cells[J].Chinese Battery Industry,2012,17(6):375-381.
[2] JIAO K,LI X. Water transport in polymer electrolyte membrane fuel cells[J]. Progress in Energy and Combustion Science,2011,37(3):221-291.
[3] MAO L,WANG C Y. Analysis of cold start in polymer electrolyte fuel cells[J]. Journal of the Electrochemical Society,2007,154(2):B139-B146.
[4] JIA Li,TAN Zetao,KANG Mi,et al. Experiment investigation on dynamic characteristics of proton exchange membrane fuel cells at subzero temperature[J]. International Journal of Hydrogen Energy,2014,39:11120-11127.
[5] TABE Y,SAITO M,FUKUI K,et al. Cold start characteristics and freezing mechanism dependence on start-up temperature in a polymer electrolyte membrane fuel cell[J]. Journal of Power Sources,2012,208:366-373.
[6] JIAO K,LI X G. Three-dimensional multiphase modeling of cold start processes in polymer electrolyte membrane fuel cells[J]. Electrochemica Acta,2009,54:6876-6891.
[7] JIANG F M,WANG C Y,CHEN K S. Current ramping:a strategy for rapid start-up of PEMFCs from subfreezing environment[J]. Journal of the Electrochemical Society,2010,157(3):B342-B347.
[8] JIAO K,LI X G. Three-dimensional multiphase modeling of cold start processes in polymer electrolyte membrane fuel cells[J]. Electrochimica Acta,2009,54:6876-6891.
[9] JIAO K,LI X G. Cold start analysis of polymer electrolyte membrane fuel cells[J]. International Journal of Hydrogen Energy,2010,35(10):5077-5094.
[10] TAJIRI K,TABUCHI Y,KAGAMI F,et al. Effect of operating and design parameters on PEFC cold start[J]. Journal of Power Sources,2007,196:7550-7554.
[11] PINTON E,FOURNERON Y,ROSINI S,et al. Experimental and theoretical investigations on a proton exchange membrane fuel cell starting up at subzero temperatures[J]. Journal of Power Sources,2009,186:80-88.
[12] HIRAKATA Satoki,HARA Masanori,KAKINUMA Katsuyosi,et al. Investigation of the effect of a hydrophilic layer in the gas diffusion layer of a polymer electrolyte membrane fuel cell on the cell performance and cold start behavior[J]. Electrochimica Acta,2014,120:240-247.
[13] DURSCH T J,TRIGUB G J,LIU J F,et al. Non-isothermal melting of ice in the gas-diffusion layer of a proton-exchange-membrane fuel cell[J]. International Journal of Heat and Mass Transfer,2013,67:896-901.
[14] STEVEN G G. Impact of land width and channel span on fuel cell performance[J]. Journal of Power Sources,2011,196:7550-7554.
[15] KHANDELWAL M,LEE S,MENCH M M. One-dimensional thermal model of cold-start in a polymer electrolyte fuel cell stack[J]. Journal of Power Sources,2007,172(2):816-830.
[16] LIM S J,PARK G G,PARK J S,et al. Investigation of freeze/thaw durability in polymer electrolyte fuel cells[J]. International Journal of Hydrogen Energy,2010,35:13111-13117.
[17] MIAO Z L,YU H M,WEI S,et al. Characteristics of proton exchange membrane fuel cells cold start with silica in cathode catalyst layers[J]. International Journal of Hydrogen Energy,2010,35:5552-5557.
[18] NANDY A,JIANG F M,GE S H,et al. Effect of cathode pore volume on PEM fuel cell cold start[J]. Journal of the Electrochemical Society,2010,157(5):B726-B736.
[19] PARK G G,LIM S J. Analysis on the freeze/thaw cycled polymer electrolyte fuel cell[J]. Current Applied Physics,2010,10:S62-S65.
[20] MENCH M M,KUMBUR E C,NEJAT Veziroglu T. Polymer electrolyte fuel cell degradation[M]. Waltham:Academic Press,2012:293-333.
[21] SONG K Y,KIM H T. Effect of air purging and dry operation on durability of PEMFC under freeze/thaw cycles[J]. International Journal of Hydrogen Energy,2011,36:12417-12426.
[22] KIM S G,LEE S J. Tomographic analysis of porosity variation in gas diffusion layer under freeze/thaw cycles[J]. International Journal of Hydrogen Energy,2012,37(1):566-574.
[23] YAN Q G,TOGHIANI H. Effect of sub-freezing temperatures on a PEM fuel cell performance,startup and fuel cell components[J]. Journal of Power Sources,2006,160:1242-1250.
[24] 詹志刚,吕志勇,黄永,等. 质子交换膜燃料电池冷启动及性能衰减研究[J].武汉理工大学学报,2011,33(1):151-155. ZHAN Zhigang,LV Zhiyong,HUANG Yong,et al. Research on PEMFC start-up at subzero temperature and performance decay[J]. Journal of Wuhan University of Technology,2011,33(1):151-155.
[25] 翁元明,林瑞,张路,等.质子交换膜燃料电池冷启动水热分布研究进展[J].化工进展,2013,32(1):64-69. WENG Yuanming,LIN Rui,ZHANG Lu,et al. Advancement of water and heat distributions of PEMFC during cold start[J]. Chemical Industry and Engineering Progress,2013,32(1):64-69.
[26] ISHIKAWA Y,MORITA T,NAKATA K,et al. Behavior of water below the freezing point in PEFCs[J]. Journal of Power Sources,2007,163:708-712.
[27] ISHIKAWA Y,HAMADA H. Super-cooled water behavior inside polymer electrolyte fuel cell cross-section below freezing temperature[J]. Journal of Power Sources,2008,179:547-552.
[28] TAJIRI K,TABUCHI Y,KAGAMI F. Effects of operating and design parameters on PEFC cold start[J]. Journal of Power Sources,2007,165(1):279-286.
[29] JOHAN K,KIM W,HONG T,et al. Impact of metallic bipolar plates on cold-start behaviors of Polymer Electrolyte Fuel Cells (PEFCs)[J]. Solid State Ion,2012,225:260-267.
[30] GEONHUI Gwak,JOHAN Ko,HYUNCHUL Ju. Numerical investigation of cold-start behavior of polymer-electrolyte fuel-cells from subzero to normal operating temperatures:effects of cell boundary and operating conditions[J]. International Journal of Hydrogen Energy,2014,39:21927-21937.
[31] GEONHUI Gwak,HYUNCHUL. A rapid start-up strategy for polymer electrolyte fuel cells at subzero temperatures based on control of the operating current density[J]. International Journal of Hydrogen Energy,2015,40:11989-11997.
[32] ROBERTS Joy A. Apparatus for improving the cold starting capability of an electrochemical fuel cell:US20010055707[P]. 2001-03-28.
[33] KAGAMI F,HISHINUMA Y,CHIKAHISA T. The performance and self-starting of a PEFC below freezing[J]. Thermal Science & Engineering,2001,9(4):15-16.
[34] LUDLOWA D J,CALEBRESE C M,YU S H,et al. PEM fuel cell membrane hydration measurement by neutron imaging[J]. Journal of Power Sources,2006,162:271-278.
[35] 张新丰,章桐.质子交换膜燃料电池水含量实验测量方法综述[J].仪器仪表学报,2012,33(9):2151-2160. ZHANG Xinfeng,ZHANG Tong. Review on water content measurement technology for PEM fuel cell[J].Chinese Journal of Scientific Instrument,2012,33(9):2151-2160.
[36] LEHMANN E H,BOILLAT P,SCHERRER G,et al. FREI G. Fuel cell studies with neutrons at the PSI's neutron imaging facilities[J]. Nuclear Instruments and Methods in Physics Research,2009:605:123-126.
[37] QUAN P,LAI M C,HUSSEY D S,et al.Time-resolved water measurement in a PEM fuel cell using high-resolution neutron imaging technique[J].Journal of Fuel Cell Science and Technology,2010,7(5):91-96.
[38] PENG Q,LAI M C,ATUL K,et al. Effects of fuel cell material properties on water management using CFD simulation and neutron imaging[J]. SAE International Journal of Materials and Manufacturing,2010,3(1):559-576.
[39] QUAN P,LAI M C. PEM fuel cell water transport-simulation and neutron imaging experiment[J].ECS Transactions,2010,26(1):179-196.
[40] GAO Y,TRUNG V N,HUSSEY D S,et al. In-situ imaging of water distribution in a gas diffusion layer by neutron radiography[J].ECS Transactions,2010,33(1):1435-1441.
[41] WANG X H,TRUNG V N. An experimental study of the liquid water saturation level in the cathode gas diffusion layer of a PEM fuel cell[J].Journal of Power Sources,2012,197(1):50-56.
[42] KHANDELWAL Manish,LEE Sungho,MENCH M M. One-dimensional thermal model of cold-start in a polymer electrolyte fuel cell stack[J]. Journal of Power Sources,2007,172(2):816-830.
[43] JIAO Kui,ALAEFOUR Ibrahim E,KARIMI Gholamreza,et al. Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell during cold start process[J]. Electrochimica Acta,2011,56:2967-2982.
[44] HOTTINEN T,HIMANE O,LUND P. Performance of planar free-breathing PEMFC at temperature below freezing[J]. Journal of Power Sources,2006,154(1):86-94.
[45] ROBERTS J. Method and apparatus for increasing the temperature of a fuel cell:US6764780B2[P]. 2004-07-20.
[46] BLANK F,HELLER C. Fuel cell having a preheating zone:US10/621551[P]. 2002-08-14.
[47] 罗晓宽,俞红梅,徐双丽,等.一种0℃以下快速启动的质子交换膜燃料电池:101447580[P]. 2009-06-03. LUO Xiaokuan,YU Hongmei,XU Shuangli,et al. Proton exchange membrane fuel cell capable of quickly starting below 0℃:101447580[P]. 2009-6-3.
[48] GEBHARDT U. Method for cold-starting a fuel cell battery,and fuel cell battery suitable for this method:US0068202[P]. 2002-06-06. |