气固摆动流化床的起始流化特性

doi:10.16085/j.issn.1000-6613.2024-0804

化工进展 ›› 2025, Vol. 44 ›› Issue (7): 3770-3780.DOI: 10.16085/j.issn.1000-6613.2024-0804

• 化工过程与装备 • 上一篇

气固摆动流化床的起始流化特性

吴邦华¹(), 王德武¹^,²(), 王若瑾¹, 刘燕¹^,², 徐荣升¹, 张少峰¹^,²

^1.河北工业大学化工学院，天津 300130
^2.化工节能过程集成与资源利用国家地方联合工程实验室，天津 300130

收稿日期:2024-05-14 修回日期:2024-05-29 出版日期:2025-07-25 发布日期:2025-08-04
通讯作者: 王德武
作者简介:吴邦华（1999—），男，硕士研究生，研究方向为化工过程多相流。E-mail：15076003873@163.com。
基金资助:
河北省自然科学基金(B2022202003);驻冀高校与石家庄市产学研合作项目(241790637A)

Initial fluidization characteristics of gas-solid rolling fluidized bed

WU Banghua¹(), WANG Dewu¹^,²(), WANG Ruojin¹, LIU Yan¹^,², XU Rongsheng¹, ZHANG Shaofeng¹^,²

^1.College of Chemical Engineering, Hebei University of Technology, Tianjin 300130, China
^2.National-Local Joint Engineering Laboratory for Energy Conservation of Chemical Process Integration and Resources Utilization, Tianjin 300130, China

Received:2024-05-14 Revised:2024-05-29 Online:2025-07-25 Published:2025-08-04
Contact: WANG Dewu

摘要/Abstract

摘要：

通过降速法与视频观测相结合的方式，本文对气固摆动流化床内气固流动随摆动过程的变化规律、床层压降和起始流化速度的变化特性等进行了研究，并与静止直立床、倾斜床进行了对比，分析了摆动对起始流化的影响，建立了摆动流化床起始流化速度预测模型。结果表明：摆动床降速至小于起始流化速度时，床面几乎垂直于壁面，不再随床体摆动而产生倾斜；起始流化速度随着摆动幅度增大或摆动周期减小而减小，在初始装料高度相同的情况下，起始流化速度从大到小依次为直立床>倾斜床>摆动床；通过受力分析建立了摆动床起始流化速度预测模型，其拟合程度良好。

关键词: 流态化, 摆动流化床, 起始流化速度, 流化曲线, 床层压降, 预测模型

Abstract:

Through the combination of deceleration method and video observation, the variation law of gas-solid flow with rolling process, the variation characteristics of bed pressure drop and initial fluidization velocity in gas-solid rolling fluidized bed were studied, and compared with those of static vertical bed and inclined bed. The influence of swing on initial fluidization was analyzed, and the prediction model of initial fluidization velocity of rolling fluidized bed was established. The results showed that when the rolling bed was reduced to less than the initial fluidization velocity, and the bed surface was almost perpendicular to the wall surface and no longer tilts with the swing of the bed. The initial fluidization velocity decreased with the increase of rolling amplitude or the decrease of rolling period. Under the same initial loading height, the order of initial fluidization velocity was: vertical bed > inclined bed > rolling bed. The prediction model of the initial fluidization velocity of the rolling bed was established by force analysis, and the fitting degree was good.

Key words: fluidization, rolling fluidized bed, initial fluidization velocity, fluidization curve, bed pressure drop, prediction model

中图分类号:

TQ021.1

吴邦华, 王德武, 王若瑾, 刘燕, 徐荣升, 张少峰. 气固摆动流化床的起始流化特性[J]. 化工进展, 2025, 44(7): 3770-3780.

WU Banghua, WANG Dewu, WANG Ruojin, LIU Yan, XU Rongsheng, ZHANG Shaofeng. Initial fluidization characteristics of gas-solid rolling fluidized bed[J]. Chemical Industry and Engineering Progress, 2025, 44(7): 3770-3780.

图/表 12

图1 气固摆动流化床实验装置及流程1—罗茨鼓风机；2—气体缓冲罐；3—截止阀；4—转子流量计；5—摆动平台；6—气室；7—床层段；8—扩径段；9—摄录机；10—压力传感器；11—压力信号采集系统；12—计算机

表1 Geldart B类玻璃珠颗粒物性

颗粒密度 $ρ p$ /kg·m^-³	堆积密度 $ρ b$ /kg·m^-³	平均粒径d_p/mm	内摩擦系数μ_i	球形度 $ϕ p$	休止角 $ϕ r$ /(°)
2495	1522	0.57	0.85	1	20

表1 Geldart B类玻璃珠颗粒物性

颗粒密度 $ρ p$ /kg·m^-³	堆积密度 $ρ b$ /kg·m^-³	平均粒径d_p/mm	内摩擦系数μ_i	球形度 $ϕ p$	休止角 $ϕ r$ /(°)
2495	1522	0.57	0.85	1	20

图2 摆动床摆动方式瞬时摆角和瞬时角速度的变化示意图[15]

图3 瞬态倾斜情况下摆动床在降速过程中各阶段的实验现象（θ=13°）

图4 瞬态倾斜情况下摆动床内颗粒的流动区域划分及状态转变示意图（θ=13°）

图5 间歇鼓泡阶段摆动床内颗粒流动区域划分（H0=500mm，Θ=13°）

图6 静止直立床在降速过程中各阶段的实验现象

图7 静止倾斜床内颗粒的流动区域划分及状态转变（Θ=13°）

图8 直立/倾斜/摆动模式流化床的流化曲线和起始流化速度变化

图9 0～T/4和T/4～T/2阶段上壁侧颗粒受力分析

图10 气体的集中程度

图11 起始流化速度的模型预测值与实验值对比

参考文献 27

[1]	XIE Yi, LIU Zeyu, GENG Yiyun, et al. Uranium extraction from seawater: Material design, emerging technologies and marine engineering[J]. Chemical Society Reviews, 2023, 52(1): 97-162.
[2]	程兵, 付强, 李清平, 等. 我国海洋油气装备发展战略研究[J]. 中国工程科学, 2023, 25(3): 13-21.
	CHENG Bing, FU Qiang, LI Qingping, et al. Development strategy of China’s offshore oil and gas equipment[J]. Strategic Study of CAE, 2023, 25(3): 13-21.
[3]	MOMONO Koichi, ISHII Jun, HOSOHARA Seiji, et al. Development of innovative gasification process of used plastic by using fluidized bed[J]. ISIJ International, 2024, 64(6): 954-963.
[4]	CHOI Yujin, WANG Shuang, YOON Young Min, et al. Sustainable strategy for converting plastic waste into energy over pyrolysis: A comparative study of fluidized-bed and fixed-bed reactors[J]. Energy, 2024, 286: 129564.
[5]	王军, 范浩东, 史鉴, 等. 流化床换热器在船用废气锅炉上的应用[J]. 舰船科学技术, 2021, 43(S1): 52-57.
	WANG Jun, FAN Haodong, SHI Jian, et al. Application of fluidized bed heat exchanger in marine waste gas boiler[J]. Ship Science and Technology, 2021, 43(S1): 52-57.
[6]	YANG Peixun, WANG Hui, LIU Jiabao, et al. Experimental study of steam condensation heat transfer characteristics in a horizontal tube under rolling motion[J]. International Journal of Thermal Sciences, 2023, 193: 108516.
[7]	HEYDARI Nasim, Faïçal LARAÇHI, KIPPING Ragna, et al. Mass transfer performance and hydrodynamics of a bubble column reactor at offshore floating conditions[J]. Industrial & Engineering Chemistry Research, 2023, 62(31): 12183-12190.
[8]	ILIUTA Ion, LARACHI Faïçal. Fischer-Tropsch synthesis in vertical, inclined and oscillating trickle-bed reactors for offshore floating applications[J]. Chemical Engineering Science, 2018, 177: 509-522.
[9]	ZHU Jianlu, WANG Han, CAO Hang, et al. Selection of natural gas dehydration process for offshore floating production storage and offloading[J]. Energy Technology, 2024, 12(4): 2300222.
[10]	DASHLIBORUN Amir Motamed, Alexander FÜSSEL, LARACHI Faïçal. Prospect of open-cell solid foams for floating-platform multiphase reactor applications—Maldistribution susceptibility and hydrodynamic behavior[J]. Chemical Engineering Journal, 2018, 332: 596-607.
[11]	牛瑞飞. 携手防治海洋白色污染[N]. 人民日报, 2021-08-19(17).
	NIU Ruifei. Work together to prevent and control marine white pollution[N]. People’s Daily, 2021-08-19(17).
[12]	HE Minjie, WU Fenghui, QU Guangfei, et al. Harmless and resourceful utilization of solid waste: Multi physical field regulation in the microbiological treatment process of solid waste treatment[J]. Environmental Research, 2023, 238: 117149.
[13]	方健, 车联发, 滕厚开, 等. 一种海洋油田固废废物源头分类减量和资源化方法:CN111170522A[P]. 2020-05-19.
	FANG Jian, CHE Lianfa, TENG Houkai, et al. A m

气固摆动流化床的起始流化特性

Initial fluidization characteristics of gas-solid rolling fluidized bed

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 12

参考文献 27