化工进展 ›› 2021, Vol. 40 ›› Issue (4): 1736-1745.DOI: 10.16085/j.issn.1000-6613.2020-2092

• 专栏:先进化工装备及智能系统工程 • 上一篇    下一篇

我国环己烷氧化分解液碱水分离技术研究进展

刘洪武1(), 潘罗其1, 鲁朝金2, 白志山2(), 宋晓敏3   

  1. 1.中国石化集团资产经营管理有限公司巴陵石化分公司,湖南 岳阳 414014
    2.华东理工大学机械与动力工程 学院,上海 200237
    3.上海灿越化工科技有限公司,上海 200237
  • 收稿日期:2020-10-19 出版日期:2021-04-05 发布日期:2021-04-14
  • 通讯作者: 白志山
  • 作者简介:刘洪武(1974—),男,硕士,研究方向为化工工艺技术。E-mail:liuhw.blsh@sinopec.com
  • 基金资助:
    国家自然科学基金(22078102)

Advances in lye separation of cyclohexane oxidative decomposition liquid in China

LIU Hongwu1(), PAN Luoqi1, LU Zhaojin2, BAI Zhishan2(), SONG Xiaomin3   

  1. 1.Baling Petrochemical Branch of Sinopec Asset Management Co. , Ltd. , Yueyang 414014, Hunan, China
    2.School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237, China
    3.Shanghai Canyue Chemical Science Technology Co. , Ltd. , Shanghai 200237, China
  • Received:2020-10-19 Online:2021-04-05 Published:2021-04-14
  • Contact: BAI Zhishan

摘要:

废碱液的分离是环己烷氧化法制备环己酮的关键处理环节,若分离不彻底,将直接导致烷蒸馏塔再沸器结垢,造成物料消耗增加及装置运行周期大幅度缩短;因此如何高效降低环己烷氧化分解液中废碱含量一直是各个企业所面临的难题。本文对环己烷氧化分解液碱水分离技术进展进行了综述,分析了重力沉降+斜板分离工艺、重力沉降+聚结分离工艺、重力沉降+旋流分离+聚结分离工艺、斜板分离+旋流分离+聚结分离工艺技术的原理、特点及其应用效果。随着深度分离技术的升级,进入烷蒸馏塔物料中Na+含量从50~100mg/kg降至0.2mg/kg以下,环己酮装置开车周期从2~3个月延长到24个月以上。从工业应用效果来看,重力沉降+旋流分离+聚结分离工艺碱水分离效率最高、工业应用效果最好,值得大力推广应用。此外,斜板分离+旋流分离+聚结分离工艺作为新型组合分离技术,其分离效果有待进一步工业验证

关键词: 环己烷, 氧化分解液, 废碱水, 聚结分离, 深度分离

Abstract:

The separation of waste lye is the key processing step in the preparation of cyclohexanone by the cyclohexane oxidation method. If the separation is incomplete, it will directly cause the scaling of the reboiler of the alkane distillation tower, resulting in increased material consumption and greatly short operating cycle of the cyclohexanone unit. Therefore, how to efficiently reducing the waste alkali content in cyclohexane oxidation decomposition liquid has always been a difficult problem faced by various enterprises. This article reviews the progress of advances in lye separation technology of cyclohexane oxidative decomposition liquid, and analyzes the principle, characteristics and application effects of the gravity sedimentation+inclined plate separation process, the gravity sedimentation+coalescence separation process, the gravity sedimentation+hydrocyclone separation+coalescence separation process, and the inclined plate separation+hydrocyclone separation+coalescence separation process. With the upgrading of deep separation technology, the Na+ content in the material entering the alkane distillation tower has dropped from 50—100mg/kg to less than 0.2mg/kg, and the start-up cycle of the cyclohexanone unit has been extended from 2—3 months to more than 24 months. From the perspective of industrial application effect, the gravity sedimentation + hydrocyclone separation+coalescence separation process has the highest lye separation efficiency and the best industrial application effect, which is worthy of vigorous promotion and application. In addition, the inclined plate separation+hydrocyclone separation+coalescence separation process is a novel combined separation technology, and its separation effect needs further industrial verification.

Key words: cyclohexane, oxidation decomposition liquid, waste lye, coalescence separation, deep separation

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn