化工进展 ›› 2019, Vol. 38 ›› Issue (07): 3194-3206.DOI: 10.16085/j.issn.1000-6613.2018-1606

• 材料科学与技术 • 上一篇    下一篇

静电纺丝技术在氨硼烷水解脱氢催化剂制备中的应用

张帅(),王斯瑶,姜召,方涛()   

  1. 西安交通大学化学工程与技术学院,陕西 西安 710049
  • 收稿日期:2018-08-06 出版日期:2019-07-05 发布日期:2019-07-05
  • 通讯作者: 方涛
  • 作者简介:张帅(1992—),男,硕士研究生,研究方向为静电纺丝技术。E-mail:<email>shaizhangpg2016@stu.xjtu.edu.cn</email>。
  • 基金资助:
    国家自然科学基金(21376186);中国博士后科学基金(2016M5927);陕西省自然科学基础研究计划(2017JQ2030)

Application of electrospinning technology in the preparation of dehydrogenation catalysts for ammonia borane hydrolysis

Shuai ZHANG(),Siyao WANG,Zhao JIANG,Tao FANG()   

  1. School of Chemical Engineering and Technology, Xi’an Jiaotong University, Xi’an 710049, Shaanxi, China
  • Received:2018-08-06 Online:2019-07-05 Published:2019-07-05
  • Contact: Tao FANG

摘要:

氨硼烷由于其氢质量分数高达19.6%,在环境条件下稳定性高,无毒,在普通溶剂中溶解度高,因此被视为是一种极具潜力的固体储氢材料。但是传统纳米金属催化剂颗粒容易出现团聚、损失、二次污染、难回收的问题。高压静电纺丝技术将微纳米纤维作为纳米金属颗粒的载体,制备出的催化剂可以有效弥补传统纳米金属催化剂的缺点。本文从静电纺丝技术、纳米纤维的分类、催化剂的分类3个角度重点介绍了静电纺丝法制备应用于氨硼烷水解的纳米催化剂。在纳米纤维的分类中详细介绍了应用电纺技术制备不同种类纤维的制作步骤和关键技术点;在催化剂的分类中全面详细介绍了贵金属以及非贵金属催化剂的制备工艺,对比两种催化剂制备的优缺点,总结出了催化剂颗粒以及载体的选择依据。最后分别提出通过技术设备的升级优化、催化颗粒与载体的合理设计、“三步”化学反应的方法来解决电纺技术效率低、催化性能差、氨硼烷再生难的问题。

关键词: 静电纺丝技术, 氨硼烷, 催化剂载体, 纳米材料, 制氢

Abstract:

Ammonia borane is considered as a potential solid hydrogen storage material due to its high hydrogen content of 19.6%, high stability, non- toxicity and high solubility in ordinary solvents. The catalysts with micro-nano fibers as carriers prepared by electrospinning technology can effectively overcome the shortcomings of traditional nano-metal catalysts such as agglomeration, loss, pollution and difficult recovery. This paper focuses on the preparation of nano-catalysts for hydrolysis of ammonia borane from three aspects of electrospinning technology, the classification of nanofibers and catalysts. Regarding nanofibers, the steps and key technical points for the preparation of different kinds of fibers by electrospinning were discussed in detail. As for the catalysts, the preparation processes of precious metals and non-noble metal catalysts as well as their advantages were reviewed, and the selection principles of catalyst particles and carriers was summarized. Finally, the methods of upgrading and optimizing both the process and the equipment, rational design of the catalytic particles and the carriers, and the “three-step” chemical reaction are put forward respectively to solve the problems of low electrospinning efficiency, poor catalytic performance and difficult for the regeneration of ammonia borane.

Key words: electrospinning techniques, ammonia borane, catalyst support, nanomaterials, hydrogen production

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn