聚合过程强化技术的发展

doi:10.16085/j.issn.1000-6613.2017-2436

摘要/Abstract

摘要： 聚合过程强化技术是实现聚合过程效能最大化、聚合物产品结构可控化以及聚合过程和产品绿色化的有效技术手段。本文综述了聚合过程强化技术的国内外进展，从流动与混合强化、传热与传质强化、反应耦合过程强化、超临界流体强化、外场强化等方面重点分析了不同聚合过程强化技术的特点，并对聚合过程强化技术中存在的问题进行了探讨。指出聚合过程强化应注重聚合动力学特性和设备特性的有效耦合，基于聚合反应特性的过程强化方法是今后的发展方向。

关键词: 聚合, 过程强化, 流动混合, 传热传质, 反应耦合

Abstract: Process intensification technology for polymerization is an effective technical means to maximization of the efficiency of polymerization process,controllability of polymer product structures,and green polymerization process and polymer product. Development of process intensification technology for polymerization was reviewed. The features of different process intensification methods were analyzed with emphasis in terms of flow and mixing,heat and mass transfer,reactive coupling,supercritical fluid,external field,etc. Also,the existent problems were discussed. It is revealed that process intensification technologies for polymerization should focus on the effective coupling between polymerization kinetics and polymerization equipment. Process intensification methods based on polymerization characteristics are the future directions of development.

Key words: polymerization, process intensification, flow and mixing, heat and mass transfer, reactive coupling

中图分类号:

TQ316

许超众, 冯连芳. 聚合过程强化技术的发展[J]. 化工进展, 2018, 37(04): 1314-1322.

XU Chaozhong, FENG Lianfang. Process intensification technologies for polymerization[J]. Chemical Industry and Engineering Progress, 2018, 37(04): 1314-1322.

参考文献

[1] STANKIEWICZ A,MOULIJN J A. Process intensification:transforming chemical engineering[J]. Chemical Engineering Progress,2000,96(1):22-34.
[2] VAN GERVEN T,STANKIEWICZ A. Structure,energy,synergy,time-the fundamentals of process intensification[J]. Industrial & Engineering Chemistry Research,2009,48(5):2465-2474.
[3] 费维扬. 过程强化的若干新进展[J]. 世界科技研究与发展,2004,26(5):1-4. FEI Weiyang. The progress of process intensification[J]. World Sci-Tech R&D,2004,26(5):1-4.
[4] 孙宏伟,陈建峰. 我国化工过程强化技术理论与应用研究进展[J]. 化工进展,2011,30(1):1-15. SUN Hongwei,CHEN Jianfeng. Advances in fundamental study and application of chemical process intensification technology in China[J]. Chemical Industry and Engineering Progress,2011,30(1):1-15.
[5] 史子瑾. 聚合反应工程基础[M]. 北京:化学工业出版社,1991. SHI Zijin. Fundamentals of polymer reaction engineering[M]. Beijing:Chemical Industry Press,1991.
[6] 陈光文,袁权. 微化工技术[J]. 化工学报,2003,54(4):427-439. CHEN Guangwen,YUAN Quan. Micro-chemical technology[J]. Journal of Chemical Industry and Engineering (China),2003,54(4):427-439.
[7] 宋顺刚,顾雪萍,王嘉骏,等. 微反应器在聚合反应中的应用[J]. 化工进展,2012,31(2):259-267. SONG Shungang,GU Xueping,WANG Jiajun,et al. Application of microreactors in polymerization[J]. Chemical Industry and Engineering Progress,2012,31(2):259-267.
[8] BALLY F,SERRA C A,HESSEL V,et al. Micromixer-assisted polymerization processes[J]. Chemical Engineering Science,2011,66(7):1449-1462.
[9] IWASAKI T,YOSHIDA J. Free radical polymerization in microreactors. significant improvement in molecular weight distribution control[J]. Macromolecules,2005,38(4):1159-1163.
[10] SERRA C,SARY N,SCHLATTER G,et al. Numerical simulation of polymerization in interdigital multilamination micromixers[J]. Lab on a Chip,2005,5(9):966-973.
[11] SERRA C,SCHLATTER G,SARY N,et al. Free radical polymerization in multilaminated microreactors:2D and 3D multiphysics CFD modeling[J]. Microfluidics and Nanofluidics,2007,3(4):451-461.
[12] WU T,MEI Y,XU C,et al. Block copolymer PEO-b-PHPMA synthesis using controlled radical polymerization on a chip[J]. Macromolecular Rapid Communications,2005,26(13):1037-1042.
[13] IWASAKI T,YOSHIDA J. CF₃SO₃H initiated cationic polymerization of diisopropenylbenzenes in macrobatch and microflow systems[J]. Macromolecular Rapid Communications,2007,28(11):1219-1224.
[14] LIU S,CHANG C H. High rate convergent synthesis and deposition of polyamide dendrimers using a continuous-flow microreactor[J]. Chemical Engineering & Technology,2007,30(3):334-340.
[15] HOANG P H,NGUYEN C T,PERUMAL J,et al. Droplet synthesis of well-defined block copolymers using solvent-resistant microfluidic device[J]. Lab on a Chip,2011,11(2):329-335.
[16] XU C,BARNES S E,WU T,et al. Solution and surface composition gradients via microfluidic confinement:fabrication of a statistical-copolymer-brush composition gradient[J]. Advanced Materials,2006,18(11):1427-1430.
[17] ROSENFELD C,SERRA C,BROCHON C,et al. Use of micromixers to control the molecular weight distribution in continuous two-stage nitroxide-mediated copolymerizations[J]. Chemical Engineering Journal,2008,135(s1):S242-S246.
[18] NAGAKI A,TOMIDA Y,YOSHIDA J I. Microflow-system-controlled anionic polymerization of styrenes[J]. Macromolecules,2008,41(17):6322-6330.
[19] NAGAKI A,KAWAMURA K,SUGA S,et al. Cation pool-initiated controlled/living polymerization using microsystems[J]. Journal of the American Chemical Society,2004,126(45):14702-14703.
[20] XIE P,WANG K,WANG P,et al. Synthesizing bromobutyl rubber by a microreactor system[J]. AIChE Journal,2017,63(3):1002-1009.
[21] NI X,ZHANG Y,MUSTAFA I. An investigation of droplet size and size distribution in methylmethacrylate suspensions in a batch oscillatory-baffled reactor[J]. Chemical Engineering Science,1998,53(16):2903-2919.
[22] NI X,ZHANG Y,MUSTAFA I. Correlation of polymer particle size with droplet size in suspension polymerisation of methylmethacrylate in a batch oscillatory-baffled reactor[J]. Chemical Engineering Science,1999,54(6):841-850.
[23] NI X,JOHNSTONE J C,SYMES K C,et al. Suspension polymerization of acrylamide in an oscillatory baffled reactor:from drops to particles[J]. AIChE Journal,2001,47(8):1746-1757.
[24] LOBRY E,LASUYE T,GOURDON C,et al. Liquid-liquid dispersion in a continuous oscillatory baffled reactor-application to suspension polymerization[J]. Chemical Engineering Journal,2015,259:505-518.
[25] 陈国南,李广赞,王嘉骏,等. 泰勒反应器中流体流动及停留时间分布研究[J]. 化学工程,2005,33(6):22-25. CHEN Guonan,LI Guangzan,WANG Jiajun,et al. Study on fluid flow and residence time distribution in Taylor vortex flow reactor[J]. Chemical Engineering(China),2005,33(6):22-25.
[26] 董杰. 泰勒反应器中细乳液聚合的研究[D]. 杭州:浙江大学,2010. DONG Jie. Miniemulsion polymerization in Taylor reactor[D]. Hangzhou:Zhejiang University,2010.
[27] PAUER W,MORITZ H. Continuous reactor concepts with superimposed secondary flow-polymerization process intensification[J]. Macromolecular Symposia,2006,243(1):299-308.
[28] RÜTTGERS D,NEGOITA I,PAUER W,et al. Process intensification of emulsion polymerization in the continuous Taylor reactor[J]. Macromolecular Symposia,2007,259(1):26-31.
[29] GONZALEZ G,COLMENAR E,DIACONU G,et al. Production of widely different dispersed polymers in a continuous Taylor-Couette reactor[J]. Macromolecular Reaction Engineering,2009,3(5/6):233-240.
[30] AOUNE A,RAMSHAW C. Process intensication:heat and mass transfer characteristics of liquid films on rotating discs[J]. International Journal of Heat and Mass Transfer,1999,42(14):2543-2556.
[31] STANKIEWICZ A,MOULIJN J A. Re-engineering the chemical processing plant:process intensification[M]. Florida:CRC Press,2003.
[32] JACOBSEN N C,HINRICHSEN O. Micromixing efficiency of a spinning disk reactor[J]. Industrial & Engineering Chemistry Research,2012,51(36):11643-11652.
[33] LADDHA G S,DEGALEESAN T E. Transport phenomena in liquid extraction[M]. New York:McGraw-Hill,1978.
[34] PASK S D,CAI Z,HELMUT M,et al. The spinning disk reactor for polymers and nanoparticles[J]. Macromolecular Reaction Engineering,2013,7(2):98-106.
[35] PASK S D,NUYKEN O,CAI Z. The spinning disk reactor:an example of a process intensification technology for polymers and particles[J]. Polymer Chemistry,2012,3(10):2698-2707.
[36] MOGHBELI M R,MOHAMMADI S,ALAVI S M. Bulk free-radical polymerization of styrene on a spinning disc reactor[J]. Journal of Applied Polymer Science,2009,113(2):709-715.
[37] DOBIE C G,MARIJAVICEVIC,BOODHOO K V K. An evaluation of the effectiveness of continuous thin film processing in a spinning disc reactor for bulk free-radical photo-copolymerisation[J]. Chemical Engineering and Processing:Process Intensification,2013,71:97-106.
[38] VICEVIC M,NOVAKOVIC K,BOODHOO K V K,et al. Kinetics of styrene free radical polymerisation in the spinning disc reactor[J]. Chemical Engineering Journal,2008,135(1):78-82.
[39] LEVESON P,DUNK W,JACHUCK R J. Numerical investigation of kinetics of free-radical polymerization on spinning disk reactor[J]. Journal of Applied Polymer Science,2003,90(3):693-699.
[40] 冯连芳,曹松峰,顾雪萍,等. 高粘搅拌聚合反应装置[J]. 合成橡胶工业,2001,24(5):257-261. FENG Lianfang,CAO Songfeng,GU Xueping,et al. Highly viscous stirred polymerization reactor[J]. China Synthetic Rubber Industry,2001,24(5):257-261.
[41] 成文凯,王嘉骏,顾雪萍,等. 聚合物搅拌脱挥设备及其CFD模拟研究进展[J]. 化工进展,2016,35(5):1283-1288. CHENG Wenkai,WANG Jiajun,GU Xueping,et al. Progress on agitated apparatus for polymer devolatilization and its CFD simulation[J]. Chemical Industry and Engineering Progress,2016,35(5):1283-1288.
[42] ARNAUD D,KUNZ A,FLEURY P A. Devices for carrying out mechanical,chemical and/or thermal processes:US9126158[P]. 2015-09-08.
[43] FLEURY P A,KUNKEL R. Devices for carrying out mechanical,chemical and/or thermal processes:US14/368626[P]. 2012-12-27.
[44] SAFRIT B T,DIENER A E. Kneader technology for the direct devolatilization of temperature sensitive elastomers[C]//Annual Technical Conference(ANTEC). Milwaukee,USA,2008.
[45] ZHAO H,SHAO L,CHEN J F. High-gravity process intensification technology and application[J]. Chemical Engineering Journal,2010,156(3):588-593.
[46] 邹海魁,初广文,向阳,等. 超重力反应强化技术最新进展[J]. 化工学报,2015,66(8):2805-2809. ZOU Haikui,CHU Guangwen,XIANG Yang,et al. New progress of HIGEE reaction technology[J]. CIESC Journal,2015,66(8):2805-2809.
[47] 张雷,高花,邹海魁,等. 丁基橡胶聚合新型超重力反应器工艺[J]. 化工学报,2008,59(1):260-263. ZHANG Lei,GAO Hua,ZOU Haikui,et al. Preparation of butyl rubber by new high-gravity technology[J]. Journal of Chemical Industry and Engineering(China),2008,59(1):260-263.
[48] 陈建峰,高花,吴一弦,等. 一种丁基橡胶的制备方法:200710110412.0[P]. 2008-02-27. CHEN Jianfeng,GAO Hua,WU Yixian,et al. A method to prepare butyl rubber:200710110412.0[P]. 2008-02-27.
[49] HAW J K. Mass transfer of centrifugally enhanced polymer devolatilization by using foam metal bed[D]. Cleveland,Ohio:Case Western Reserve University,1995.
[50] SUNDMACHER K,KIENLE A. Reactive distillation[M]. Weinheim:Wiley-VCH,2002.
[51] SHAH M,ZONDERVAN E,OUDSHOORN M L,et al. A novel process for the synthesis of unsaturated polyester[J]. Chemical Engineering and Processing:Process Intensification,2011,50(8):747-756.
[52] SHAH M,KISS A A,ZONDERVAN E,et al. Pilot-scale experimental validation of unsaturated polyesters synthesis by reactive distillation[J]. Chemical Engineering Journal,2012,213:175-185.
[53] LOMELI-RODRIGUEZ M,RIVERA-TOLEDO M,LOPEZ-SANCHEZ J A. Process intensification of the synthesis of biomass-derived renewable polyesters:reactive distillation and divided wall column polyesterification[J]. Industrial & Engineering Chemistry Research,2017,56(11):3017-3032.
[54] 马里诺·赞索斯. 反应挤出——原理与实践[M]. 瞿金平,李光吉,周南桥,等译. 北京:化学工业出版社,1999. MARINO Xanthos. Reactive extrusion:principles and practice[M]. QU Jingping,LI Guangji,ZHOU Nanqiao,et al. trans. Beijing:Chemical Industry Press,1999.
[55] 王益龙,刘安栋. 反应挤出技术研究进展[J]. 现代塑料加工应用,2004,16(2):35-39. WANG Yilong,LIU Andong. Development in reactive extrusion technology[J]. Modern Plastics Processing and Applications,2004,16(2):35-39.
[56] 张才亮. 聚合物反应挤出相容剂的合成与表征[D]. 杭州:浙江大学,2005. ZHANG Cailiang. The synthesis and characterization of compatibilizator using the reaction extrusion of polymers[D]. Hangzhou:Zhejiang University,2005.
[57] LIU H,YAO Z,CAO K,et al. Characteristic analysis on a reactive extrusion process for the imidization of poly(styrene-co-maleic anhydride) with aniline[J]. Chemical Engineering Science,2010,65(5):1781-1789.
[58] YUAN X,GUAN Y,LI S,et al. Anionic bulk polymerization to synthesize styrene-isoprene diblock and multiblock copolymers by reactive extrusion[J]. Journal of Applied Polymer Science,2014,131(2):1-9.
[59] 季薇芸. "反应型相容示踪剂"方法研究聚合物反应共混中的界面反应和形态演变[D]. 杭州:浙江大学,2016. JI Weiyun. A concept of reactive compatibilizer-tracer for studying the interfacial reaction and evolution of morphology in reactive polymer blending[D]. Hangzhou:Zhejiang University,2016.
[60] 廖传华,周勇军. 超临界流体技术及其过程强化[M]. 北京:中国石化出版社,2007. LIAO Chuanhua,ZHOU Yongjun. Supercritical fluid technology and process intensification[M]. Beijing:China Petrochemical Press,2007.
[61] 张怀平,陈鸣才. 超临界二氧化碳中的聚合反应[J]. 化学进展,2009,21(9):1869-1879. ZHANG Huaiping,CHEN Mingcai. Polymerization in surpercritical carbon dioxide[J]. Progress in Chemistry,2009,21(9):1869-1879.
[62] MA C,CAO L,WANG X,et al. Characterization and adsorption capacity of a novel high-performance polymeric sorbent synthesized in supercritical carbon dioxide[J]. The Journal of Supercritical Fluids,2012,62:232-239.
[63] ALAIMO D,GRIGNARD B,KUPPAN C,et al. A photocleavable stabilizer for the preparation of PHEMA nanogels by dispersion polymerization in supercritical carbon dioxide[J]. Polymer Chemistry,2017,8(3):581-591.
[64] BASSETT S P,BIRKIN N A,JENNINGS J,et al. One-pot synthesis of micron-sized polybetaine particles; innovative use of supercritical carbon dioxide[J]. Polymer Chemistry,2017,8(31):4557-4564.
[65] DOBIE C G,BOODHOO K V K. Surfactant-free emulsion polymerisation of methyl methacrylate and methyl acrylate using intensified processing methods[J]. Chemical Engineering and Processing:Process Intensification,2010,49(9):901-911.
[66] BHANVASE B A,PINJARI D V,GOGATE P R,et al. Process intensification of encapsulation of functionalized CaCO₃ nanoparticles using ultrasound assisted emulsion polymerization[J]. Chemical Engineering and Processing:Process Intensification,2011,50(11/12):1160-1168.
[67] MEULDIJK J,VAN DE KRUIJS B H P,VAN VEKEMANS J A J M,et al. A novel production route for nylon-6:aspects of microwave-enhanced catalysis[J]. Macromolecular Symposia,2011,302(1):69-79.
[68] DUBEY S P,ABHYANKAR H A,MARCHANTE V,et al. Microwave energy assisted synthesis of poly lactic acid via continuous reactive extrusion:modelling of reaction kinetics[J]. RSC Advances,2017,7(30):18529-18538.