丙烯酸酯改性桐油基乳化剂的合成、表征及光固化性能

doi:10.16085/j.issn.1000-6613.2017-0270

化工进展 ›› 2017, Vol. 36 ›› Issue (10): 3860-3865.DOI: 10.16085/j.issn.1000-6613.2017-0270

丙烯酸酯改性桐油基乳化剂的合成、表征及光固化性能

张海召, 周宏勇, 王家喜

河北工业大学化工学院, 天津 300130

收稿日期:2017-02-22 修回日期:2017-04-16 出版日期:2017-10-05 发布日期:2017-10-05
通讯作者: 王家喜,教授,博士生导师,主要从事功能高分子材料及其应用研究.
作者简介:张海召(1990-),男,硕士研究生.

Synthesis, characterization and UV curable property of acrylate modified tung oil-based emulsifier

ZHANG Haizhao, ZHOU Hongyong, WANG Jiaxi

School of Chemical Engineering, Hebei University of Technology, Tianjin 300130, China

Received:2017-02-22 Revised:2017-04-16 Online:2017-10-05 Published:2017-10-05

摘要/Abstract

摘要： 桐油和马来酸酐经Diels-Alder反应形成桐油二酸酐（TM2）、桐油三酸酐（TM3），桐油三酸酐与不同比例的甲基丙烯酸β羟乙酯（HEMA）反应，将桐油三酸酐及其与HEMA反应物中的酸酐官能团水解，合成出含3~6个羧基官能团丙烯酸酯改性的桐油衍生物。产物结构经红外光谱和核磁共振氢谱表征。测定了桐油基衍生物钠盐的表面张力及CMC值，考察了改性桐油基乳化剂对丙烯酸酯类单体及低聚物的乳化性能。结果表明，随着桐油基衍生物中的羧酸钠基团的增加，衍生物的亲水性增强，CMC值呈上升趋势，乳化性能增强。丙烯酸酯改性桐油基衍生物及其复配物可以光固化，可以通过调节光固化体系的组分得到耐水性很好的光固化膜。

关键词: 生物质, 桐油, 多子乳化剂, 合成, 乳液, 紫外光固化, 可持续性

Abstract: Tung oil anhydrides(TM2 and TM3)were synthesized through the Diels-Alder reaction of tung oil and maleic anhydride(MA). The TM3 reacted with 2-hydroxyethyl methacrylate(HEMA)at different ratios forming tung oil ester, the rest anhydride hydrolyzed to yield tung oil derivatives with 3～6 carboxyl groups. The obtained products were characterized by FTIR and ¹H NMR. The CMC value and surface tension of the tung oil base derivatives were measured by conductivity. The emulsifying performance of sodium carboxylate for acrylic monomers and oligomers was evaluated. The results showed that the hydrophilic of derivatives and the CMC values were increased with the increase of sodium carboxylate group of derivative, and then the emulsifying ability enhanced. The acrylate modified tung oil derivatives and their composite were UV curable. The cured film with excellent water resistance can be obtained through the tuning the formula of UV curable composite.

Key words: biomass, tung oil, multi-head emulsifier, synthesis, emulsion, UV curable, sustainability

中图分类号:

TQ630

张海召, 周宏勇, 王家喜. 丙烯酸酯改性桐油基乳化剂的合成、表征及光固化性能[J]. 化工进展, 2017, 36(10): 3860-3865.

ZHANG Haizhao, ZHOU Hongyong, WANG Jiaxi. Synthesis, characterization and UV curable property of acrylate modified tung oil-based emulsifier[J]. Chemical Industry and Engineering Progress, 2017, 36(10): 3860-3865.

参考文献

[1] TATIYA P D,MAHULIKAR P P,GITE V V.Designing of polyamidoamine-based polyurea microcapsules containing tung oil for anticorrosive coating applications[J].Journal of Coatings Technology and Research,2016,13(4):715-726.
[2] ADEKUNLE A,ORSAT V,RAGHAVAN V.Lignocellulosic bioethanol:a review and design conceptualization study of production from cassava peels[J].Renewable and Sustainable Energy Reviews,2016,64:518-530.
[3] SINDHU R,GNANSOUNOU E,BINOD P,et al.Bioconversion of sugarcane crop residue for value added products-an overview[J].Renewable Energy,2016,98:203-215.
[4] WU J B,ZHANG T,MA G Z,et al.Synthesis of a tung oil-rosin adduct via the Diels-Alder reaction:its reaction mechanism and properties in an ultraviolet-curable adhesive[J].Journal of Applied Polymer Science,2013,130(6):4201-4208.
[5] FAYYAD E M,ALMAADEED M A,JONES A.Encapsulation of tung oil for self-healing coatings in corrosion applications[J].Science of Advanced Materials,2015,7(12):2628-2638.
[6] 万长鑫,肖邵博,黄琼涛,等.改性天然生漆复合涂料的制备与性能研究[J].林产工业,2016,43(3):24-28.WAN C X,XIAO S B,HUANG Q T,et al.Preparation and properties of modified raw lacquer composite coating[J].China Forest Products Industry,2016,43(3):24-28.
[7] 黄坤,夏建陵.桐油及其衍生物的改性在高分子材料中的应用进展[J].化工进展,2008,27(10):1588-1592.HUANG K,XIA J L.Progress of modification of tung oil and its derivatives in the application of polymer materials[J].Chemical Industry and Engineering Progress,2008,27(10):1588-1592.
[8] MEIORIN C,ARANGUREN M I,MOSIEWICKI M A.Polymeric networks based on tung oil:reaction and modification with green oil monomers[J].European Polymer Journal,2015,67:551-560.
[9] ZHANG D B,ZE L,YU C J,et al.Preparation of nano-palygorskite/tung oil/boric acid triple modified resin reinforced composite woven brake band and its friction and wear properties[J].Journal of the Balkan Tribological Assiociation,2016,22(1A):579-591.
[10] XIN J N,LI M,LI R,et al.Green epoxy resin system based on lignin and tung oil and its application in epoxy asphalt[J].ACS Sustainable Chemistry and Engineering,2016,4(5):2754-2761.
[11] YANG X J,LI S H,XIA J L,et al.Novel renewable resource-based UV-curable copolymers derived from myrcene and tung oil:preparation, characterization and properties[J].Industrial Crops and Products,2015,63:17-25.
[12] CHITTAVANICH P,MILLER K,SOUCEK M D.A photo-curing study of a pigmented UV-curable alkyd[J].Progress in Organic Coatings,2012,73(4):392-400.
[13] HUANG Y G,PANG L X,WANG H L,et al.Synthesis and properties of UV-curable tung oil based resins via modification of Diels-Alder reaction, nonisocyanate polyurethane and acrylates[J].Progress in Organic Coatings,2013,76(4):654-661.
[14] HUANG Y G,YE G D,YANG J W.Synthesis and properties of UV-curable acrylate functionalized tung oil based resins via Diels-Alder reaction[J].Progress in Organic Coatings, 2015,78:28-34.
[15] 陈玉焕,侯安宇,张姝明,等.电导法测定水溶性表面活性剂CMC实验的改进[J].广州化工,2016(6):130-132.CHEN Y H,HOU A Y,ZHANG S M,et al.Experimental improvement on determination of critical micelle concentration of soluble surfactant by conductometric method[J].Guangzhou Chemical Industry,2016(6):130-132.

丙烯酸酯改性桐油基乳化剂的合成、表征及光固化性能

Synthesis, characterization and UV curable property of acrylate modified tung oil-based emulsifier

PDF (PC)

可视化

被引次数

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	时永兴, 林刚, 孙晓航, 蒋韦庚, 乔大伟, 颜彬航. 二氧化碳加氢制甲醇过程中铜基催化剂活性位点研究进展[J]. 化工进展, 2023, 42(S1): 287-298.
[2]	杨霞珍, 彭伊凡, 刘化章, 霍超. 熔铁催化剂活性相的调控及其费托反应性能[J]. 化工进展, 2023, 42(S1): 310-318.
[3]	赵巍, 赵德银, 李世瀚, 刘洪达, 孙进, 郭艳秋. 三嗪型天然气管道缓蚀型减阻剂合成与应用[J]. 化工进展, 2023, 42(S1): 391-399.
[4]	王正坤, 黎四芳. 双子表面活性剂癸炔二醇的绿色合成[J]. 化工进展, 2023, 42(S1): 400-410.
[5]	向阳, 黄寻, 魏子栋. 电催化有机合成反应的活性和选择性调控研究进展[J]. 化工进展, 2023, 42(8): 4005-4014.
[6]	王帅晴, 杨思文, 李娜, 孙占英, 安浩然. 元素掺杂生物质炭材料在电化学储能中的研究进展[J]. 化工进展, 2023, 42(8): 4296-4306.
[7]	赵健, 卓泽文, 董航, 高文健. 含蜡原油及其乳状液体系微观结构观测的新方法[J]. 化工进展, 2023, 42(8): 4372-4384.
[8]	吴亚, 赵丹, 方荣苗, 李婧瑶, 常娜娜, 杜春保, 王文珍, 史俊. 用于复杂原油乳液的高效破乳剂开发及应用研究进展[J]. 化工进展, 2023, 42(8): 4398-4413.
[9]	郑梦启, 王成业, 汪炎, 王伟, 袁守军, 胡真虎, 何春华, 王杰, 梅红. 菌藻共生技术在工业废水零排放中的应用与展望[J]. 化工进展, 2023, 42(8): 4424-4431.
[10]	陈森, 殷鹏远, 杨证禄, 莫一鸣, 崔希利, 锁显, 邢华斌. 功能固体材料智能合成研究进展[J]. 化工进展, 2023, 42(7): 3340-3348.
[11]	关红玲, 杨辉, 井红权, 刘玉琼, 谷守玉, 王好斌, 侯翠红. 木质素基控释材料及其在药物输送和肥料控释中的应用[J]. 化工进展, 2023, 42(7): 3695-3707.
[12]	陆洋, 周劲松, 周启昕, 王瑭, 刘壮, 李博昊, 周灵涛. CeO₂/TiO₂吸附剂煤气脱汞产物的浸出规律[J]. 化工进展, 2023, 42(7): 3875-3883.
[13]	王帅旗, 王从新, 王学林, 田志坚. 无溶剂快速合成ZSM-12分子筛[J]. 化工进展, 2023, 42(7): 3561-3571.
[14]	余希希, 张金帅, 雷文, 刘承果. 基于动态共价键自修复的光固化高分子材料研究进展[J]. 化工进展, 2023, 42(7): 3589-3599.
[15]	王知彩, 刘伟伟, 周璁, 潘春秀, 闫洪雷, 李占库, 颜井冲, 任世彪, 雷智平, 水恒福. 基于煤基腐殖酸的高效减水剂合成与性能表征[J]. 化工进展, 2023, 42(7): 3634-3642.