化工进展 ›› 2016, Vol. 35 ›› Issue (10): 3072-3077.DOI: 10.16085/j.issn.1000-6613.2016.10.009

• 化工过程与装备 • 上一篇    下一篇

炼厂气回收过程中分离技术的能效分析

李保军, 贺高红, 肖武, 代岩, 陈博   

  1. 大连理工大学精细化工国家重点实验室, 膜科学与技术研究开发中心, 辽宁 大连 116023
  • 收稿日期:2016-02-18 修回日期:2016-03-21 出版日期:2016-10-05 发布日期:2016-10-05
  • 通讯作者: 贺高红,教授。E-mail:hgaohong@dlut.edu.cn
  • 作者简介:李保军(1974-),男,博士研究生。

Analysis of energy efficiency of separation technology during a refinery gas recycling process

LI Baojun, HE Gaohong, XIAO Wu, DAI Yan, CHEN Bo   

  1. State Key Laboratory of Fine Chemicals, Research and Development Center of Membrane Science and Technology, Dalian University of Technology, Dalian 116023, Liaoning, China
  • Received:2016-02-18 Revised:2016-03-21 Online:2016-10-05 Published:2016-10-05

摘要: 针对炼厂气多目标回收工艺设计时缺乏理论指导的问题,本文系统阐述了分离过程能效比的概念,将气体分离过程中压力和温度变化导致系统与外界交换的能量统一用电功表示,得到了分离过程能耗与产品回收量间关系的定量表示方法;以某厂炼厂气回收过程为例,比较了不同分离技术和不同分离过程的能效比。当产品氢纯度要求不高(≥97%)时,采用变压吸附(PSA)工艺的能效比较高(0.86),与膜分离工艺相比,提高了28%;当产品氢纯度要求较高(≥99.9%)时,采用膜分离-PSA工艺可以获得更高的能效比(0.54),与PSA-膜分离工艺相比,能效比提高了40%。研究结果表明:分离过程的能效比可以用于评价不同分离技术或不同分离过程的能量效率,可用于指导不同分离技术的适用范围和多技术耦合工艺过程的设计,能够为炼厂气回收工艺设计提供一定的理论指导。

关键词: 炼厂气, 能效比, 分离, 回收, 数学模拟

Abstract: The industrial process design lacks theoretical guidances for multiple target recovery from refinery gas. In this study,the concept of energy efficiency ratio was proposed for separation process. By using the electrical power to represent the energy associated with the variation of pressure and temperature during the gas separation process,a quantitative relationship between the energy consumption and the target product recovery was established. A typical refinery gas recycling process was taken as example,in which various separation technologies such as membrane or pressure swing adsorption(PSA)were utilized for thorough investigation. The energy efficiency ratios of various separation technologies and different separation processes were calculated. Results showed that,when H2 purity of product is relatively low(≥97%),PSA technology achieves the higher value of energy efficiency ratio(0.86),which is 28% higher comparing to the membrane separation technology. When H2 purity of product is relatively high(≥99.9%),the hybrid membrane-PSA process achieves the higher energy efficiency ratio(0.54)than the hybrid PSA-membrane process,and the increase is about 40%. It indicates that the energy efficiency ratio can be employed to evaluate the efficiency of energy consumption of various separation technologies or different separation processes,and can provide a useful design guidance for refinery gas recycling process.

Key words: refinery gas, energy efficiency ratio, separation, recovery, simulation

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn