化工进展 ›› 2016, Vol. 35 ›› Issue (04): 1154-1161.DOI: 10.16085/j.issn.1000-6613.2016.04.030

• 材料科学与技术 • 上一篇    下一篇

双核碱性离子液体的合成及其在阴离子交换膜中的应用

陈力豪, 王璐璐, 王吉林, 封瑞江, 吕振波   

  1. 辽宁石油化工大学化学化工与环境学部石油化工学院, 辽宁 抚顺 113001
  • 收稿日期:2015-08-03 修回日期:2015-10-19 出版日期:2016-04-05 发布日期:2016-04-05
  • 通讯作者: 王吉林,副教授.E-mail:wangjilin1978@163.com.
  • 作者简介:陈力豪(1989-),男,硕士研究生,主要从事燃料电池导电膜相关领域的研究.E-mail:215379626@qq.com.
  • 基金资助:
    辽宁省科技厅博士启动项目(20141126)、辽宁省教育厅科学研究一般项目(L2013153)及抚顺市科学技术发展资金计划项目(20141115).

Synthesis of dual-core basic ionic liquids and its application for anion exchange membranes

CHEN Lihao, WANG Lulu, WANG Jilin, FENG Ruijiang, LÜ Zhenbo   

  1. School of Petroleum and Chemical Technology, College of Chemistry, Chemical Engineering and Environmental Engineering, Liaoning Shihua University, Fushun 113001, Liaoning, China
  • Received:2015-08-03 Revised:2015-10-19 Online:2016-04-05 Published:2016-04-05

摘要: 以溴代十二烷、吗啉和1,4-二溴丁烷为原料,通过两步法合成新型氢氧型N-十二烷基双核吗啉离子液体([Nbmd]OH),分别用红外光谱(FTIR)、氢核磁分析(1H NMR)对合成的离子液体进行结构分析;采用热重(TGA)测试离子液体的热稳定性,同时测定了离子液体的溶解性和碱性.此外,以季铵化壳聚糖(QCS)为制膜原料,碱性离子液体[Nbmd]OH为掺杂物,通过溶液浇铸法制备了一系列掺杂碱性离子液体([Nbmd]OH)的交联复合膜(QCS/[Nbmd]OH).并采用FTIR、TGA、SEM对复合膜的结构、热稳定性和微观形貌进行分析,同时考察离子液体加入量对QCS/[Nbmd]OH复合膜的含水率、机械强度及导电性能等指标的影响.结果表明:随着离子液体含量的增加,QCS/[Nbmd]OH复合膜的含水率、溶胀度、电导率增加,力学性能下降.当离子液体掺杂质量分数为30%时,复合膜在70℃下的电导率为1.17×10-2S/cm,拉伸强度为11.8 MPa,含水率和溶胀度分别为320%和236%.

关键词: 离子液体, 交联剂, 膜, 电导率

Abstract: A new basic dicationic morpholine ionic liquid (IL) was synthesized with Bromodecane, morphline and 1, 4-dibromobutane via a two-step procedure. The structure of new IL was characterized by FTIR, 1HNMR spectra and the thermal stability was analyzed by TGA. The alkalinity and solubility of the dicationic IL were also measured. Meanwhile, a series of anion exchange membrane (QCS/[Nbmd]OH) were prepared by the casting method with quaternized chitosan (QCS) as raw material and the alkaline ionic liquids ([Nbmd]OH) as dopants. The structure, thermal stability and morphology of the composite membrane prepared in this paper were characterized by FTIR, TGA and SEM. Then the influence of dopping amount of ionic liquid on the water content, mechanical properties and conductivity of the composite membrane was also investigated. It was showed that the water content, ion exchange capacity, anionic conductivity increased and tensile strength, elongation at break decreased with the increases of amount ionic liquids ([Nbmd]OH) in the membranes. The anionic conductivity, tensile strength, ion exchange capacity, water content and wet-swelling rate could respectively reach 1.17 ×10-2 S/cm, 11.8 MPa, 1.26 mmol/g, 320% and 236% at 70℃ and the mass fraction of ionic liquids of 30%.

Key words: ionic liquid, crosslinking agent, membranes, anionic conductivity

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn