阳极开孔形状对金属锰电沉积行为的影响及数值模拟

doi:10.16085/j.issn.1000-6613.2016-2186

化工进展 ›› 2017, Vol. 36 ›› Issue (07): 2584-2591.DOI: 10.16085/j.issn.1000-6613.2016-2186

阳极开孔形状对金属锰电沉积行为的影响及数值模拟

郭岚峰^1,2, 刘仁龙^1,2, 刘作华^1,2, 舒建成^1,2, 张兴然^1,2, 陶长元^1,2

1 重庆大学化学化工学院, 重庆 400044;
2 洁净能源与特色资源化工过程重庆市重点实验室, 重庆 400044

收稿日期:2016-11-24 修回日期:2017-02-21 出版日期:2017-07-05 发布日期:2017-07-05
通讯作者: 刘仁龙,博士,教授,博士生导师。
作者简介:郭岚峰(1991-),男,硕士。E-mail:569117540@qq.com。
基金资助:
国家科技支撑计划（2015BAB17B00）及广西科技厅千亿元产业关键共性技术科技攻关计划（2014BA10016）项目

Numerical simulation and experimental study on behavior of anode with different opening shapes in manganese electrowinning

GUO Lanfeng^1,2, LIU Renlong^1,2, LIU Zuohua^1,2, SHU Jiancheng^1,2, ZHANG Xingran^1,2, TAO Changyuan^1,2

1 School of Chemistry and Chemical Engineering, Chongqing University, Chongqing 400044, China;
2 Chongqing Key Laboratory of Chemical Process for Clean Energy and Resource Utilization, Chongqing 400044, China

Received:2016-11-24 Revised:2017-02-21 Online:2017-07-05 Published:2017-07-05

摘要/Abstract

摘要： 电沉积锰过程中阳极的结构直接影响电解槽内电场分布以及电沉积过程能耗。采用实验与数值模拟相结合的手段，分析阴极金属锰和阳极泥的微观形貌、电流效率以及电解槽内电场分布，研究阳极板开孔形状对电沉积锰过程的影响规律。对电解槽进行了三维建模与数值模拟，并通过在线测定阴极过电位实验对模拟结果进行了验证。实验结果表明：在相同开孔面积的条件下，圆孔比方孔和整块矩形孔的电解性能要好。圆孔阳极板在电解过程中阴极过电位的值最小为-1.609V，获得的最大电流效率74.54%，最低单位能耗降5506kW·h/t，而且金属锰表面更加平整致密。模拟结果表明：模拟结果和实验结果具有良好的一致性，圆孔阳极板在电解过程中电解槽内电场分布均匀、合理，在阴极板水平与垂直方向上均获得最小过电位值-1.5989V。

关键词: 阳极板, 孔形状, 电沉积锰, 数值模拟

Abstract: In the process of manganese electrowinning,the structure of anode directly affects the energy consumption and the distribution of electric field in the electrolytic cell.By means of experiment and simulation,the morphology,current efficiency,and electric field distribution of cathode manganese and anode slime were analyzed,and the effects of anode with different opening shapes on the process of electrowinning manganese were investigated.Three-dimensional modeling and numerical simulation of the electrolytic cell were developed,and the simulation results were verified by the on-line measurement of cathodic over-potential.The experimental results show that,under the premise of the same porosity and electrolysis condition,the anode plate with circle openings had better performance than the plate with square or rectangular openings.The anode plate with circle openings could obtain maximum current efficiency of 74.54%,and per-unit energy consumption can be reduced to 5506kW·h/t,while the surface of metal manganese is more smooth and compact.The simulation results show good agreement with experimental results.With the anode plate of circle openings,the electric field distribution in the electrolytic cell is uniform and reasonable,and the minimum value of -1.5989V is obtained in the horizontal and vertical direction of the cathode plate.

Key words: anode plate, opening shapes, manganese electrowinning, numerical simulation

中图分类号:

TF803.27

郭岚峰, 刘仁龙, 刘作华, 舒建成, 张兴然, 陶长元. 阳极开孔形状对金属锰电沉积行为的影响及数值模拟[J]. 化工进展, 2017, 36(07): 2584-2591.

GUO Lanfeng, LIU Renlong, LIU Zuohua, SHU Jiancheng, ZHANG Xingran, TAO Changyuan. Numerical simulation and experimental study on behavior of anode with different opening shapes in manganese electrowinning[J]. Chemical Industry and Engineering Progress, 2017, 36(07): 2584-2591.

参考文献

[1] LU J,DREISINGER D,GLÜCK T. Manganese electrodeposition-a literature review[J]. Hydrometallurgy,2014,141:105-116.
[2] 谭柱中,梅光贵,李维健,等. 锰冶金学[M]. 长沙:中南大学出版社,2004. TAN Z Z,MEI G G,LI W J,et al. Metallurgy of manganese[M].Changsha:Central South University,2004.
[3] ZHANG W S,CHEN C Y. Manganese metallurgy review. Part Ⅱ:Manganese separation and recovery from solution[J]. Hydrometallurgy,2007,89:160-177.
[4] RASHKOV S,DOBREV T,NONCHEVA Z,et al. Lead-cobalt anodes for electrowinning of zinc from sulphate electrolytes[J]. Hydrometallurgy,1999,52(3):223-230.
[5] STEFANOV Y,DOBREV T. Developing and studying the properties of Pb-TiO₂ alloy coated lead composite anodes for zinc electrowinning[J]. Transactions of the Institute of Metal Finishing,2005,83(6):291-295.
[6] 周敏元,梅光贵. 电解金属锰阴、阳极过程的电化学反应及提高电流效率的探讨[J]. 中国锰业,2001,19(1):17-19. ZHOU M Y,MEI G G. Study on the cathode and anode electrochemical reaction & increase current efficiency from electrolytic manganese[J]. China's Manganese Industry,2001,19(1):17-19.
[7] 杨光棣,汪大成. 电解锰用新型阳极的研制[J]. 贵州科学,1991,9:161-165. YANG G D,WANG D C. New anode material for manganese electrowinning[J]. Guizhou Science,1991,9:161-165.
[8] 黄健,罗宏,李勇,等. 电解金属锰用棒式阳极的半工业化试验[J]. 有色金属(冶炼部分),2010(1):53-55 HUANG J,LUO H,LI Y,et al. Semi industrialization experiment of electrowinning manganese bar anode[J]. Nonferrous Metals (Extractive Metallurgy),2010(1):53-55.
[9] 杨文翠,彭文杰,李新海,等. 电解锰用钛基修饰阳极Ti/SnO₂/MnO₂的制备与性能研究[J]. 矿冶工程,2014,34(3):90-93. YANG W C,PENG W J,LI X H,et al. Preparation of titanium-substrate modified Ti/SnO₂/MnO₂ anode plate for electrolytic manganese metal and its performance study[J]. Mining and Metallurgical Engineering,2014,34(3):90-93.
[10] LAI Y Q,JIANG L X,LI J,et al. A novel porous Pb-Ag anode for energy-saving in zinc electro-winning Part I:Laboratory preparation and properties[J]. Hydrometallurgy,2010,102(1/4):73-80.
[11] ZHANG W,ROBICHAUD M,GHALI E,et al. Electrochemical behavior of mesh and plate catalytic anodes during zinc electrowinning[J]. Transactions of Nonferrous Metals Society of China,2016(1):1-24.
[12] CHEN Y,ZHAO W L,WEN Q. Electric catalytic performance of anodic electro deposition Ti/MnO₂ electrode and phenol degradation[J]. Eectrochemical,2011,17(2):199-203.
[13] IVANOV I,STEFANOV Y,NONCHEVA Z,et al. Insoluble anodes used in hydrometallurgy Part I. Corrosion resistance of lead and lead alloy anodes[J]. Hydrometallurgy,2000,57:109-124.
[14] NIKOLOSKI A N,NICOL M J. Addition of cobalt to lead anodes used for oxygen evolution——a literature review[J]. Mineral Processing and Extractive Metallurgy Review:An International Journal,2010,31(1):30-57.
[15] PETROVA M,STEFANOV Y,NONCHEVA Z. Electrochemical behavior of lead alloys as anodes in zinc electrowinning[J]. British Corrosion Journal,1999,34(3):198-200.
[16] 詹水清,周孑民,李茂,等. 开孔阳极铝电解槽熔体中气液两相流数值模拟[J]. 化工学报,2013,64(10):3612-3619. ZHAN S Q,ZHOU J M,L I M,et al. Numerical simulation of gas-liquid two-phase flow in aluminum reduction cells with perforated anodes[J]. CIESC Journal,2013,64(10):3612-3619.
[17] 彭跃,谭柱中. 电解锰专用阳极板板面新结构:202090064U[P]. 2011-12-28. PENG Y,TAN Z Z. The new surface structure of special electrolytic manganese anode plate:202090064 U[P]. 2011-12-28.
[18] ZHANG W,ROBICHAUD M,GHALI E,et al. Electrochemical behavior of mesh and plate oxide coated anodes during zinc electrowinning[J]. Transactions of Nonferrous Metals Society of China,2016,26(2):589-598.
[19] FAN X,HOU J,SUN D G,et al. Mn-oxides catalyzed periodic current oscillation on the anode[J]. Electrochimica Acta,2013,102:466-471.
[20] 陈燕,杜军,范兴,等. Pulse current electrodeposition of manganese from sulfate electrolytes[C]//十六届全国电化学会议,重庆,2011. CHEN Y,DU J,FAN X,et al. Pulse current electrodeposition of manganese from sulfate electrolytes[C]//The 16th,NCE,Chongqing,2011.
[21] 赵振宇,李培金,孟庆函,等. 多孔镍铁电极电解还原制备2,2'-二氯氢化偶氮苯[J]. 化工进展,2010,29(9):1640-1644. ZHAO Z Y,LI P J,MENG Q H,et al. Synthesis of 2,2'-dichlorohydrazobenzene using porous Ni-Fe electrode[J]. Chemical Industry and Engineering Progress,2010,29(9):1640-1644.
[22] 陶长元,侯军,范兴,等. 电解锰过程中的阳极电势振荡行为[J]. 中国稀土学报,2012,30:266-271. TAO C Y,HOU J,FAN X,et al. Anodic potential oscillation in electrolytic managanese process[J]. Journal of Chinese Society of Rare Earths,2012,30:266-271.
[23] 孙大贵,童贤清,范兴,等. 电解锰阴极电沉积分形行为的研究[J]. 中国稀土学报,2012,30:272-276. SUN D G,TONG X Q,FAN X,et al. Fractal growth behaviors of Mn on cathode[J]. Journal of Chinese Society of Rare Earths,2012,30:272-276.
[24] 詹锡松. 电解金属锰电解槽节能技术的探讨[J]. 中国锰业,2008,26(4):48-80. ZHAN X S. A technical research of thrifty of energy of emm channel[J]. China's Manganese Industry,2008,26(4):48-80.

阳极开孔形状对金属锰电沉积行为的影响及数值模拟

Numerical simulation and experimental study on behavior of anode with different opening shapes in manganese electrowinning

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王太, 苏硕, 李晟瑞, 马小龙, 刘春涛. 交流电场中贴壁气泡的动力学行为[J]. 化工进展, 2023, 42(S1): 133-141.
[2]	陈匡胤, 李蕊兰, 童杨, 沈建华. 质子交换膜燃料电池气体扩散层结构与设计研究进展[J]. 化工进展, 2023, 42(S1): 246-259.
[3]	郭强, 赵文凯, 肖永厚. 增强流体扰动强化变压吸附甲硫醚/氮气分离的数值模拟[J]. 化工进展, 2023, 42(S1): 64-72.
[4]	邵博识, 谭宏博. 锯齿波纹板对挥发性有机物低温脱除过程强化模拟分析[J]. 化工进展, 2023, 42(S1): 84-93.
[5]	刘炫麟, 王驿凯, 戴苏洲, 殷勇高. 热泵中氨基甲酸铵分解反应特性及反应器结构优化[J]. 化工进展, 2023, 42(9): 4522-4530.
[6]	赵曦, 马浩然, 李平, 黄爱玲. 错位碰撞型微混合器混合性能的模拟分析与优化设计[J]. 化工进展, 2023, 42(9): 4559-4572.
[7]	叶振东, 刘涵, 吕静, 张亚宁, 刘洪芝. 基于钙镁二元盐的热化学储能反应器的性能优化[J]. 化工进展, 2023, 42(8): 4307-4314.
[8]	俞俊楠, 俞建峰, 程洋, 齐一搏, 化春键, 蒋毅. 基于深度学习的变宽度浓度梯度芯片性能预测[J]. 化工进展, 2023, 42(7): 3383-3393.
[9]	单雪影, 张濛, 张家傅, 李玲玉, 宋艳, 李锦春. 阻燃型环氧树脂的燃烧数值模拟[J]. 化工进展, 2023, 42(7): 3413-3419.
[10]	王硕, 张亚新, 朱博韬. 基于灰色预测模型的水煤浆输送管道冲蚀磨损寿命预测[J]. 化工进展, 2023, 42(7): 3431-3442.
[11]	周龙大, 赵立新, 徐保蕊, 张爽, 刘琳. 电场-旋流耦合强化多相介质分离研究进展[J]. 化工进展, 2023, 42(7): 3443-3456.
[12]	张晨宇, 王宁, 徐洪涛, 罗祝清. 纳米颗粒强化传热的多级潜热储热器性能评价[J]. 化工进展, 2023, 42(5): 2332-2342.
[13]	卢兴福, 戴波, 杨世亮. 转鼓内圆柱形颗粒混合的超二次曲面离散单元法模拟[J]. 化工进展, 2023, 42(5): 2252-2261.
[14]	马润梅, 杨海超, 李正大, 李双喜, 赵祥, 章国庆. 表面强化镀层对高速轴承腔密封端面变形及摩擦磨损影响分析[J]. 化工进展, 2023, 42(4): 1688-1697.
[15]	张成松, 张静, 龚斌, 李明洋, 袁佳新, 李宏业. 自吸射流柔性搅拌桨振动特性[J]. 化工进展, 2023, 42(4): 1728-1738.